On 24/02/2022 13:13, Ard Biesheuvel wrote:
On Thu, 24 Feb 2022 at 13:58, Tomas Pilar (tpilar)
<quic_tpi...@quicinc.com> wrote:
Move the logic that sets EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE Pci
attribute to DriverBindingStart() before the memory that backs the
DMA engine is allocated.
This ensures that the DMA-backing memory is not forcibly allocated
below 4G in system address map. Otherwise the allocation fails on
platforms that do not have any memory below the 4G mark and the drive
initialisation fails.
Cc: Ray Ni <ray...@intel.com>
Cc: Ard Biesheuvel <ardb+tianoc...@kernel.org>
Cc: Leif Lindholm <l...@nuviainc.com>
Signed-off-by: Tomas Pilar <quic_tpi...@quicinc.com>
Ehm, nope, that is not exactly what I meant.
The existing code stores the original PCI attributes in the controller
private data, enables MMIO/IO decoding and bus mastering, and only
then sets the dual address cycle attribute.
All of that needs to move, so that the captured attributes are accurate.
Okay, I was wondering. My thought was that we probably want to re-enable
bus mastering
on reset so I kept that bit of code in the original location.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#86971): https://edk2.groups.io/g/devel/message/86971
Mute This Topic: https://groups.io/mt/89364026/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
