(+ Jeremy)
On Fri, 28 Jan 2022 at 16:40, Adrien Thierry <athie...@redhat.com> wrote:
>
> Describe the miniuart clock frequency in a _DSD property, so that it can
> be read from the Linux driver.
>
> The miniuart clock frequency is the core clock frequency on the
> Raspberry Pi. It can be modified by the user using the 'core_freq'
> property in the config.txt file. So, we fetch it from the underlying
> Raspberry Pi firmware.
>
> Signed-off-by: Adrien Thierry <athie...@redhat.com>
> ---
> Platform/RaspberryPi/AcpiTables/Uart.asl | 14 ++++++++++++++
> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +++++++++
> .../RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf | 1 +
> Platform/RaspberryPi/RPi3/RPi3.dsc | 5 +++++
> Platform/RaspberryPi/RPi4/RPi4.dsc | 5 +++++
> Platform/RaspberryPi/RaspberryPi.dec | 1 +
> 6 files changed, 35 insertions(+)
>
> diff --git a/Platform/RaspberryPi/AcpiTables/Uart.asl
> b/Platform/RaspberryPi/AcpiTables/Uart.asl
> index 974f06d3bc..ef5165be98 100644
> --- a/Platform/RaspberryPi/AcpiTables/Uart.asl
> +++ b/Platform/RaspberryPi/AcpiTables/Uart.asl
> @@ -77,6 +77,20 @@ Device (URTM)
> MEMORY32SETBASE (RBUF, RMEM, RBAS, BCM2836_MINI_UART_OFFSET)
>
> Return (^RBUF)
>
> }
>
> +
>
> + //
>
> + // Mini Uart Clock Rate will be dynamically updated during boot
>
> + // 0x4D 0x55 0x43 0x52 0xC 0x1000000 (Value must be > 16777215)
>
> + //
>
> + Name (MUCR, 0x1000000)
>
> +
>
> + Name (_DSD, Package ()
>
> + {
>
> + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package ()
>
> + {
>
> + Package (2) { "clock-frequency", MUCR },
>
> + }
>
> + })
>
> }
>
>
>
> //
>
> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> index 415d99fadb..3dcf2bac0d 100644
> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
> @@ -44,6 +44,7 @@ STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
> STATIC UINT32 mModelFamily = 0;
>
> STATIC UINT32 mModelInstalledMB = 0;
>
> STATIC UINT32 mModelRevision = 0;
>
> +STATIC UINT32 mCoreClockRate = 0;
>
>
>
> STATIC EFI_MAC_ADDRESS mMacAddress;
>
>
>
> @@ -798,6 +799,7 @@ STATIC CONST AML_NAME_OP_REPLACE SsdtEmmcNameOpReplace[]
> = {
>
>
> STATIC CONST AML_NAME_OP_REPLACE DsdtNameOpReplace[] = {
>
> { "URIU", PcdToken (PcdUartInUse) },
>
> + { "MUCR", PcdToken (PcdMiniUartClockRate) },
>
> { }
>
> };
>
>
>
> @@ -944,6 +946,13 @@ ConfigInitialize (
> DEBUG ((DEBUG_INFO, "Current Raspberry Pi revision %x\n",
> mModelRevision));
>
> }
>
>
>
> + Status = mFwProtocol->GetClockRate (RPI_MBOX_CLOCK_RATE_CORE,
> &mCoreClockRate);
>
> + if (Status != EFI_SUCCESS) {
>
> + DEBUG ((DEBUG_ERROR, "Couldn't get the Raspberry Pi core clock rate:
> %r\n", Status));
>
> + } else {
>
> + PcdSet32S (PcdMiniUartClockRate, mCoreClockRate);
>
> + }
>
> +
>
> Status = SetupVariables ();
>
> if (Status != EFI_SUCCESS) {
>
> DEBUG ((DEBUG_ERROR, "Couldn't not setup NV vars: %r\n", Status));
>
> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
> b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
> index e6e22ad82e..6f6e8f42ac 100644
> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf
> @@ -95,6 +95,7 @@
> gRaspberryPiTokenSpaceGuid.PcdFanTemp
>
> gRaspberryPiTokenSpaceGuid.PcdUartInUse
>
> gRaspberryPiTokenSpaceGuid.PcdXhciPci
>
> + gRaspberryPiTokenSpaceGuid.PcdMiniUartClockRate
>
>
>
> [Depex]
>
> gPcdProtocolGuid AND gRaspberryPiFirmwareProtocolGuid
>
> diff --git a/Platform/RaspberryPi/RPi3/RPi3.dsc
> b/Platform/RaspberryPi/RPi3/RPi3.dsc
> index 6ab5d1ae6d..6dc48dc233 100644
> --- a/Platform/RaspberryPi/RPi3/RPi3.dsc
> +++ b/Platform/RaspberryPi/RPi3/RPi3.dsc
> @@ -561,6 +561,11 @@
> #
>
> gRaspberryPiTokenSpaceGuid.PcdUartInUse|1
>
>
>
> + #
>
> + # Mini-UART clock rate
>
> + #
>
> + gRaspberryPiTokenSpaceGuid.PcdMiniUartClockRate|250000000
>
> +
>
>
> ################################################################################
>
> #
>
> # Components Section - list of all EDK II Modules needed by this Platform
>
> diff --git a/Platform/RaspberryPi/RPi4/RPi4.dsc
> b/Platform/RaspberryPi/RPi4/RPi4.dsc
> index 44ed60ab2f..a9c0c36bb1 100644
> --- a/Platform/RaspberryPi/RPi4/RPi4.dsc
> +++ b/Platform/RaspberryPi/RPi4/RPi4.dsc
> @@ -580,6 +580,11 @@
> #
>
> gRaspberryPiTokenSpaceGuid.PcdUartInUse|0
>
>
>
> + #
>
> + # Mini-UART clock rate
>
> + #
>
> + gRaspberryPiTokenSpaceGuid.PcdMiniUartClockRate|500000000
>
> +
>
>
> ################################################################################
>
> #
>
> # Components Section - list of all EDK II Modules needed by this Platform
>
> diff --git a/Platform/RaspberryPi/RaspberryPi.dec
> b/Platform/RaspberryPi/RaspberryPi.dec
> index 797be59274..17b6061a05 100644
> --- a/Platform/RaspberryPi/RaspberryPi.dec
> +++ b/Platform/RaspberryPi/RaspberryPi.dec
> @@ -72,3 +72,4 @@
> gRaspberryPiTokenSpaceGuid.PcdMmcEnableDma|0|UINT32|0x0000001F
>
> gRaspberryPiTokenSpaceGuid.PcdUartInUse|1|UINT32|0x00000021
>
> gRaspberryPiTokenSpaceGuid.PcdXhciPci|0|UINT32|0x00000022
>
> + gRaspberryPiTokenSpaceGuid.PcdMiniUartClockRate|0|UINT32|0x00000023
>
> --
> 2.17.1
>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#86204): https://edk2.groups.io/g/devel/message/86204
Mute This Topic: https://groups.io/mt/88746955/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
