(This is migrated from edk2-platforms:Silicon/RISC-V)
The driver produces RISC-V EFI_CPU_ARCH_PROTOCOL and use RISC-V
platform level timer library.
Due to RISC-V timer Control Status Register (CSR) is platform
implementation specific, RISC-V CPU DXE driver invokes platform level
timer library to access to timer CSRs.
Signed-off-by: Abner Chang <abner.ch...@hpe.com>
Co-authored-by: Gilbert Chen <gilbert.c...@hpe.com>
Reviewed-by: Leif Lindholm <leif.lindh...@linaro.org>
Cc: Leif Lindholm <leif.lindh...@linaro.org>
Cc: Gilbert Chen <gilbert.c...@hpe.com>
---
.../ProcessorPkg/Universal/CpuDxe/CpuDxe.inf | 48 +++
.../ProcessorPkg/Universal/CpuDxe/CpuDxe.h | 199 +++++++++++
.../ProcessorPkg/Universal/CpuDxe/CpuDxe.c | 316 ++++++++++++++++++
.../ProcessorPkg/Universal/CpuDxe/CpuDxe.uni | 13 +
.../Universal/CpuDxe/CpuDxeExtra.uni | 14 +
5 files changed, 590 insertions(+)
create mode 100644 Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.inf
create mode 100644 Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.h
create mode 100644 Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.c
create mode 100644 Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.uni
create mode 100644 Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxeExtra.uni
diff --git a/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.inf
b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.inf
new file mode 100644
index 0000000000..29cc4413bd
--- /dev/null
+++ b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.inf
@@ -0,0 +1,48 @@
+## @file
+# RISC-V CPU DXE module.
+#
+# Copyright (c) 2016 - 2019, Hewlett Packard Enterprise Development LP. All
rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001b
+ BASE_NAME = CpuDxe
+ MODULE_UNI_FILE = CpuDxe.uni
+ FILE_GUID = 2AEB1f3E-5B6B-441B-92C1-4A9E6FC85E92
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+
+ ENTRY_POINT = InitializeCpu
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/RISC-V/ProcessorPkg/RiscVProcessorPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ CpuLib
+ CpuExceptionHandlerLib
+ DebugLib
+ RiscVCpuLib
+ TimerLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[Sources]
+ CpuDxe.c
+ CpuDxe.h
+
+[Protocols]
+ gEfiCpuArchProtocolGuid ## PRODUCES
+
+[Pcd]
+ gUefiRiscVPkgTokenSpaceGuid.PcdRiscVMachineTimerFrequencyInHerz
+
+[Depex]
+ TRUE
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ CpuDxeExtra.uni
diff --git a/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.h
b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.h
new file mode 100644
index 0000000000..c2c2739434
--- /dev/null
+++ b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.h
@@ -0,0 +1,199 @@
+/** @file
+ RISC-V CPU DXE module header file.
+
+ Copyright (c) 2016 - 2019, Hewlett Packard Enterprise Development LP. All
rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef CPU_DXE_H_
+#define CPU_DXE_H_
+
+#include <PiDxe.h>
+
+#include <Protocol/Cpu.h>
+#include <Library/BaseLib.h>
+#include <Library/CpuExceptionHandlerLib.h>
+#include <Library/DebugLib.h>
+#include <Library/RiscVCpuLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+
+/**
+ Flush CPU data cache. If the instruction cache is fully coherent
+ with all DMA operations then function can just return EFI_SUCCESS.
+
+ @param This Protocol instance structure
+ @param Start Physical address to start flushing from.
+ @param Length Number of bytes to flush. Round up to chipset
+ granularity.
+ @param FlushType Specifies the type of flush operation to perform.
+
+ @retval EFI_SUCCESS If cache was flushed
+ @retval EFI_UNSUPPORTED If flush type is not supported.
+ @retval EFI_DEVICE_ERROR If requested range could not be flushed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length,
+ IN EFI_CPU_FLUSH_TYPE FlushType
+ );
+
+/**
+ Enables CPU interrupts.
+
+ @param This Protocol instance structure
+
+ @retval EFI_SUCCESS If interrupts were enabled in the CPU
+ @retval EFI_DEVICE_ERROR If interrupts could not be enabled on the CPU.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ );
+
+/**
+ Disables CPU interrupts.
+
+ @param This Protocol instance structure
+
+ @retval EFI_SUCCESS If interrupts were disabled in the CPU.
+ @retval EFI_DEVICE_ERROR If interrupts could not be disabled on the CPU.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ );
+
+/**
+ Return the state of interrupts.
+
+ @param This Protocol instance structure
+ @param State Pointer to the CPU's current interrupt state
+
+ @retval EFI_SUCCESS If interrupts were disabled in the CPU.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ OUT BOOLEAN *State
+ );
+
+/**
+ Generates an INIT to the CPU.
+
+ @param This Protocol instance structure
+ @param InitType Type of CPU INIT to perform
+
+ @retval EFI_SUCCESS If CPU INIT occurred. This value should never be
+ seen.
+ @retval EFI_DEVICE_ERROR If CPU INIT failed.
+ @retval EFI_UNSUPPORTED Requested type of CPU INIT not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_CPU_INIT_TYPE InitType
+ );
+
+/**
+ Registers a function to be called from the CPU interrupt handler.
+
+ @param This Protocol instance structure
+ @param InterruptType Defines which interrupt to hook. IA-32
+ valid range is 0x00 through 0xFF
+ @param InterruptHandler A pointer to a function of type
+ EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. A null
+ pointer is an error condition.
+
+ @retval EFI_SUCCESS If handler installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler
+ for InterruptType was previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for
+ InterruptType was not previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType
+ is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ );
+
+/**
+ Returns a timer value from one of the CPU's internal timers. There is no
+ inherent time interval between ticks but is a function of the CPU frequency.
+
+ @param This - Protocol instance structure.
+ @param TimerIndex - Specifies which CPU timer is requested.
+ @param TimerValue - Pointer to the returned timer value.
+ @param TimerPeriod - A pointer to the amount of time that passes
+ in femtoseconds (10-15) for each increment
+ of TimerValue. If TimerValue does not
+ increment at a predictable rate, then 0 is
+ returned. The amount of time that has
+ passed between two calls to GetTimerValue()
+ can be calculated with the formula
+ (TimerValue2 - TimerValue1) * TimerPeriod.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS - If the CPU timer count was returned.
+ @retval EFI_UNSUPPORTED - If the CPU does not have any readable timers.
+ @retval EFI_DEVICE_ERROR - If an error occurred while reading the timer.
+ @retval EFI_INVALID_PARAMETER - TimerIndex is not valid or TimerValue is
NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN UINT32 TimerIndex,
+ OUT UINT64 *TimerValue,
+ OUT UINT64 *TimerPeriod OPTIONAL
+ );
+
+/**
+ Set memory cacheability attributes for given range of memeory.
+
+ @param This Protocol instance structure
+ @param BaseAddress Specifies the start address of the
+ memory range
+ @param Length Specifies the length of the memory range
+ @param Attributes The memory cacheability for the memory range
+
+ @retval EFI_SUCCESS If the cacheability of that memory range is
+ set successfully
+ @retval EFI_UNSUPPORTED If the desired operation cannot be done
+ @retval EFI_INVALID_PARAMETER The input parameter is not correct,
+ such as Length = 0
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 Attributes
+ );
+
+#endif
+
diff --git a/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.c
b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.c
new file mode 100644
index 0000000000..27a07b1561
--- /dev/null
+++ b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.c
@@ -0,0 +1,316 @@
+/** @file
+ RISC-V CPU DXE driver.
+
+ Copyright (c) 2016 - 2019, Hewlett Packard Enterprise Development LP. All
rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "CpuDxe.h"
+
+//
+// Global Variables
+//
+STATIC BOOLEAN mInterruptState = FALSE;
+STATIC EFI_HANDLE mCpuHandle = NULL;
+
+EFI_CPU_ARCH_PROTOCOL gCpu = {
+ CpuFlushCpuDataCache,
+ CpuEnableInterrupt,
+ CpuDisableInterrupt,
+ CpuGetInterruptState,
+ CpuInit,
+ CpuRegisterInterruptHandler,
+ CpuGetTimerValue,
+ CpuSetMemoryAttributes,
+ 1, // NumberOfTimers
+ 4 // DmaBufferAlignment
+};
+
+//
+// CPU Arch Protocol Functions
+//
+
+/**
+ Flush CPU data cache. If the instruction cache is fully coherent
+ with all DMA operations then function can just return EFI_SUCCESS.
+
+ @param This Protocol instance structure
+ @param Start Physical address to start flushing from.
+ @param Length Number of bytes to flush. Round up to chipset
+ granularity.
+ @param FlushType Specifies the type of flush operation to perform.
+
+ @retval EFI_SUCCESS If cache was flushed
+ @retval EFI_UNSUPPORTED If flush type is not supported.
+ @retval EFI_DEVICE_ERROR If requested range could not be flushed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length,
+ IN EFI_CPU_FLUSH_TYPE FlushType
+ )
+{
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Enables CPU interrupts.
+
+ @param This Protocol instance structure
+
+ @retval EFI_SUCCESS If interrupts were enabled in the CPU
+ @retval EFI_DEVICE_ERROR If interrupts could not be enabled on the CPU.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ )
+{
+ EnableInterrupts ();
+ mInterruptState = TRUE;
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Disables CPU interrupts.
+
+ @param This Protocol instance structure
+
+ @retval EFI_SUCCESS If interrupts were disabled in the CPU.
+ @retval EFI_DEVICE_ERROR If interrupts could not be disabled on the CPU.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ )
+{
+ DisableInterrupts ();
+ mInterruptState = FALSE;
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Return the state of interrupts.
+
+ @param This Protocol instance structure
+ @param State Pointer to the CPU's current interrupt state
+
+ @retval EFI_SUCCESS If interrupts were disabled in the CPU.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ OUT BOOLEAN *State
+ )
+{
+ if (State == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *State = mInterruptState;
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Generates an INIT to the CPU.
+
+ @param This Protocol instance structure
+ @param InitType Type of CPU INIT to perform
+
+ @retval EFI_SUCCESS If CPU INIT occurred. This value should never be
+ seen.
+ @retval EFI_DEVICE_ERROR If CPU INIT failed.
+ @retval EFI_UNSUPPORTED Requested type of CPU INIT not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_CPU_INIT_TYPE InitType
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+/**
+ Registers a function to be called from the CPU interrupt handler.
+
+ @param This Protocol instance structure
+ @param InterruptType Defines which interrupt to hook. IA-32
+ valid range is 0x00 through 0xFF
+ @param InterruptHandler A pointer to a function of type
+ EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. A null
+ pointer is an error condition.
+
+ @retval EFI_SUCCESS If handler installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler
+ for InterruptType was previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for
+ InterruptType was not previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType
+ is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ )
+{
+ return RegisterCpuInterruptHandler (InterruptType, InterruptHandler);
+}
+
+
+/**
+ Returns a timer value from one of the CPU's internal timers. There is no
+ inherent time interval between ticks but is a function of the CPU frequency.
+
+ @param This - Protocol instance structure.
+ @param TimerIndex - Specifies which CPU timer is requested.
+ @param TimerValue - Pointer to the returned timer value.
+ @param TimerPeriod - A pointer to the amount of time that passes
+ in femtoseconds (10-15) for each increment
+ of TimerValue. If TimerValue does not
+ increment at a predictable rate, then 0 is
+ returned. The amount of time that has
+ passed between two calls to GetTimerValue()
+ can be calculated with the formula
+ (TimerValue2 - TimerValue1) * TimerPeriod.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS - If the CPU timer count was returned.
+ @retval EFI_UNSUPPORTED - If the CPU does not have any readable timers.
+ @retval EFI_DEVICE_ERROR - If an error occurred while reading the timer.
+ @retval EFI_INVALID_PARAMETER - TimerIndex is not valid or TimerValue is
NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN UINT32 TimerIndex,
+ OUT UINT64 *TimerValue,
+ OUT UINT64 *TimerPeriod OPTIONAL
+ )
+{
+ if (TimerValue == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (TimerIndex != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *TimerValue = (UINT64)RiscVReadMachineTimer ();
+ if (TimerPeriod != NULL) {
+ *TimerPeriod = DivU64x32 (
+ 1000000000000000u,
+ PcdGet64 (PcdRiscVMachineTimerFrequencyInHerz)
+ );
+ }
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Implementation of SetMemoryAttributes() service of CPU Architecture Protocol.
+
+ This function modifies the attributes for the memory region specified by
BaseAddress and
+ Length from their current attributes to the attributes specified by
Attributes.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of a
memory region.
+ @param Length The size in bytes of the memory region.
+ @param Attributes The bit mask of attributes to set for the memory
region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_ACCESS_DENIED The attributes for the memory resource range
specified by
+ BaseAddress and Length cannot be modified.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ Attributes specified an illegal combination of
attributes that
+ cannot be set together.
+ @retval EFI_OUT_OF_RESOURCES There are not enough system resources to
modify the attributes of
+ the memory resource range.
+ @retval EFI_UNSUPPORTED The processor does not support one or more
bytes of the memory
+ resource range specified by BaseAddress and
Length.
+ The bit mask of attributes is not support for
the memory resource
+ range specified by BaseAddress and Length.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 Attributes
+ )
+{
+ DEBUG ((DEBUG_INFO, "%a: Set memory attributes not supported yet\n",
__FUNCTION__));
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Initialize the state information for the CPU Architectural Protocol.
+
+ @param ImageHandle Image handle this driver.
+ @param SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS Thread can be successfully created
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Cannot create the thread
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeCpu (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Machine mode handler is initiated in CpuExceptionHandlerLibConstructor in
+ // CpuExecptionHandlerLib.
+ //
+
+ //
+ // Make sure interrupts are disabled
+ //
+ DisableInterrupts ();
+
+ //
+ // Install CPU Architectural Protocol
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mCpuHandle,
+ &gEfiCpuArchProtocolGuid, &gCpu,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
+
diff --git a/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.uni
b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.uni
new file mode 100644
index 0000000000..460141a1aa
--- /dev/null
+++ b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxe.uni
@@ -0,0 +1,13 @@
+// /** @file
+//
+// Copyright (c) 2016 - 2019, Hewlett Packard Enterprise Development LP. All
rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "Installs RISC-V CPU
Architecture Protocol"
+
+#string STR_MODULE_DESCRIPTION #language en-US "RISC-V CPU driver
installs CPU Architecture Protocol."
+
diff --git a/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxeExtra.uni
b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxeExtra.uni
new file mode 100644
index 0000000000..6f819f068e
--- /dev/null
+++ b/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe/CpuDxeExtra.uni
@@ -0,0 +1,14 @@
+// /** @file
+// CpuDxe Localized Strings and Content
+//
+// Copyright (c) 2016 - 2019, Hewlett Packard Enterprise Development LP. All
rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+#string STR_PROPERTIES_MODULE_NAME
+#language en-US
+"RISC-V Architectural DXE Driver"
+
+
--
2.31.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#85350): https://edk2.groups.io/g/devel/message/85350
Mute This Topic: https://groups.io/mt/88278522/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
