Remove the configuration and image headers from the flash image. This was likely intended for the UEFI firmware to be loaded by the ROM code, but the BeagleBoard only has 64KB SRAM and so EDK2 needs to be executed as a second stage loader.
Signed-off-by: Rebecca Cran <[email protected]> --- Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf b/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf index a2cfeb3bc27b..dbae015ff382 100644 --- a/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf +++ b/Platform/BeagleBoard/BeagleBoardPkg/BeagleBoardPkg.fdf @@ -23,7 +23,7 @@ [FD.BeagleBoard_EFI] -BaseAddress = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device. +BaseAddress = 0x80008000|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device. Size = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device ErasePolarity = 1 BlockSize = 0x1 @@ -44,16 +44,7 @@ NumBlocks = 0xB0000 # RegionType <FV, DATA, or FILE> # ################################################################################ -0x00000000|0x00000200 -FILE = Platform/BeagleBoard/BeagleBoardPkg/ConfigurationHeader.bin - -0x00000200|0x00000008 -DATA = { - 0xF8, 0xFD, 0x0A, 0x00, # image size: 0xB0000 - 0x208 == 0xAFDF8 - 0x00, 0x80, 0x00, 0x80 # entry point: 0x80008000 -} - -0x00000208|0x000AFDF8 +0x00000000|0x000B0000 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize FV = FVMAIN_COMPACT -- 2.31.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#80530): https://edk2.groups.io/g/devel/message/80530 Mute This Topic: https://groups.io/mt/85526129/21656 Group Owner: [email protected] Unsubscribe: https://edk2.groups.io/g/devel/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
