Hi all, So Leif and I have been working on USB Audio but we've run into a snag. We've encountered a problem -- neither of us knows enough about USB to figure out how to get the class-specific AC interface descriptors, and those contain vital information that I need to be able to control the audio device. The audio specification was quite useless. So I have two projects running in parallel: the USB audio one and the VirtIO audio (We managed to get the virtio-snd patchset in qemu and I've got a built version of it over here and, though its not a fully working implementation, as long as I get something -- no matter how bad it sounds -- I'll be happy). Whichever project we get working first is the one we move forward with. The VirtIO sound device specification contains four virtqueues: the control queue for controlling the device; the event queue for receiving notifications from the device; the tx queue for transmitting audio data to the device; and the rx queue for receiving audio data from the device. Thus far I've been following the VirtioRngDxe code as a guide on how to get a VirtIO device initialized using the VirtioLib in OVMF, but I've reached an impasse regarding the queues and descriptors.
The VirtioRngDxe DXE uses a single descriptor and a single queue for operation. However, the RNG device works vastly differently to the audio device and is far simpler. The virtio-snd specification says that, to initialize the device, I must (copied from the spec): * Configure the control, event, tx and rx queues. * Read the jacks field and send a control request to query information about the available jacks. * Read the streams field and send a control request to query information about the available PCM streams. * Read the chmaps field and send a control request to query information about the available channel maps. * Populate the event queue with empty buffers. Steps 2, 3, 4, and 5 are a bit confusing and raise some questions: 1. Does the device automatically send notifications in the event queue about the jacks, streams, and channel maps, or do I have to explicitly ask for them? 2. How many buffers would we need to populate the event queue with, and what VirtioLib function (if any) specifically accomplishes that? -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#77382): https://edk2.groups.io/g/devel/message/77382 Mute This Topic: https://groups.io/mt/83904983/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
