Hi Leif, pon., 14 cze 2021 o 23:55 Leif Lindholm <l...@nuviainc.com> napisał(a): > > Hi Marcin, > > On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote: > > Hi, > > > > The MDIO ACPI binding has been established and merged to the > > Linux tree, > > Congratulations! :) > > Is FreeBSD expected to follow suit?
There's no driver yet, but once it's finally created I will make sure it supports ACPI properly. > > > hence it is now possible to update the ACPI > > description of the platforms that base on the Marvell SoCs. > > > > For convenience, the code is exposed in the public github branch: > > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613 > > There is also MacchiatoBin firmware binary avaialable for testing: > > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0 > > > > I'm looking forward to the comments or remarks. > > The patches themselves look straightforward enough. > I *would* prefer some tested-by, for these sources rather than the > binary, before merging though. > I have some our patches queued, that are blocked by this patchset. In case no time is found for external testers - if this may help to get it pushed through, please see below logs from the next-20210628 tag and unchanged firmware. All network ports of MacchiatoBin and CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO interfaces: MacchiatoBin # uname -a Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 09:14:07 CEST 2021 aarch64 GNU/Linux # dmesg | grep MRVL0101 [ 1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0 [ 1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0 [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver [mv88x3340] (irq=POLL) [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver [mv88x3340] (irq=POLL) # dmesg | grep MRVL0100 [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver [Marvell 88E1510] (irq=POLL) # dmesg | grep mvpp2 [...] [ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver [mv88x3340] (irq=POLL) [ 2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode [ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver [mv88x3340] (irq=POLL) [ 2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode [ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver [Marvell 88E1510] (irq=POLL) [ 2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode [ 2.936351] mvpp2 MRVL0110:01 eth4: configuring for inband/2500base-x link mode [ 5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow control off # CN913x-DB # uname -a Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29 09:14:07 CEST 2021 aarch64 GNU/Linux # dmesg | grep MRVL0100 [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver [Marvell 88E1510] (irq=POLL) [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver [Marvell 88E1510] (irq=POLL) # dmesg | grep mvpp2 [...] [ 2.544917] mvpp2 MRVL0110:00 eth1: configuring for inband/10gbase-r link mode [ 2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow control rx [ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver [Marvell 88E1510] (irq=POLL) [ 2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode [ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver [Marvell 88E1510] (irq=POLL) [ 2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode [ 2.810169] mvpp2 MRVL0110:01 eth4: configuring for inband/10gbase-r link mode [ 2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow control rx [ 5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow control off [ 10.840942] mvpp2 MRVL0110:00 eth1: Link is Down [ 10.864124] mvpp2 MRVL0110:01 eth4: Link is Down # Best regards, Marcin -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#77274): https://edk2.groups.io/g/devel/message/77274 Mute This Topic: https://groups.io/mt/83513508/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
