On 28.06.21 16:57, Laszlo Ersek wrote:
On 06/25/21 20:47, Kun Qin wrote:
Hi Mike,
Thanks for the information. I can update the patch and proposed spec
change to use flexible array in v-next if there is no other concerns.
After switching to flexible array, OFFSET_OF (Data) should lead to the
same result as sizeof.
This may be true on specific compilers, but it is *not* guaranteed by
the C language standard.
Sorry, for completeness sake... :)
I don't think it really depends on the compiler (but can vary per ABI),
but it's a conceptual issue with alignment requirements. Assuming
natural alignment and the usual stuff, for "struct s { uint64_t a;
uint32_t b; uint8_t c[]; }" the alignment requirement is 8 Bytes, where
there are 4 Bytes of padding after "b" (as "c" may as well be empty).
"c" however is guaranteed to start after b in the same fashion as if it
was declared with the maximum amount of elements that fit the memory. So
if we take 4 elements for "c", and note that "c" has an alignment
requirement of 1 Byte, c[0 .. 3] will alias the padding after "b". For
"sizeof" this means that the padding is included, whereas for "offsetof"
it is not, yielding "sizeof(struct s) == offsetof(struct s, c) + 4".
That is what I meant by "wasted space" earlier, but this could possibly
be made nicer with macros as necessary.
As for this specific struct, the values should be identical as it is padded.
Best regards,
Marvin
Quoting C99 6.7.2.1 "Structure and union specifiers", paragraph 16:
"In most situations, the flexible array member is ignored. In
particular, the size of the structure is as if the flexible array member
were omitted except that it may have more trailing padding than the
omission would imply."
Quoting footnotes 17 and 19,
(17) [...]
struct s { int n; double d[]; };
[...]
(19) [...]
the expressions:
[...]
sizeof (struct s) >= offsetof(struct s, d)
are always equal to 1.
Thanks
Laszlo
While sizeof would be a preferred way to move
forward.
Regards,
Kun
On 06/24/2021 08:25, Kinney, Michael D wrote:
Hello,
Flexible array members are supported and should be used. The old style
of adding an array of size [1] at the end of a structure was used at a
time
flexible array members were not supported by all compilers (late 1990's).
The workarounds used to handle the array of size [1] are very
confusing when
reading the C code and the fact that sizeof() does not produce the
expected
result make it even worse.
If we use flexible array members in this proposed change then there is
no need to use OFFSET_OF(). Correct?
Mike
-----Original Message-----
From: Marvin Häuser <mhaeu...@posteo.de>
Sent: Thursday, June 24, 2021 1:00 AM
To: Kun Qin <kuqi...@gmail.com>; Laszlo Ersek <ler...@redhat.com>;
devel@edk2.groups.io
Cc: Wang, Jian J <jian.j.w...@intel.com>; Wu, Hao A
<hao.a...@intel.com>; Dong, Eric <eric.d...@intel.com>; Ni, Ray
<ray...@intel.com>; Kinney, Michael D <michael.d.kin...@intel.com>;
Liming Gao <gaolim...@byosoft.com.cn>; Liu, Zhiguang
<zhiguang....@intel.com>; Andrew Fish <af...@apple.com>; Leif
Lindholm <l...@nuviainc.com>; Bret Barkelew
<bret.barke...@microsoft.com>; michael.kuba...@microsoft.com
Subject: Re: [edk2-devel] [PATCH v1 0/5] EDK2 Code First: PI
Specification: Update EFI_MM_COMMUNICATE_HEADER
Hey Kun,
Why would you rely on undefined behaviours? The OFFSET_OF macro is
well-defined for GCC and Clang as it's implemented by an intrinsic, and
while the expression for the MSVC compiler is undefined behaviour as per
the C standard, it is well-defined for MSVC due to their own
implementation being identical. From my standpoint, all supported
compilers will yield well-defined behaviour even this way. OFFSET_OF on
flexible arrays is not UB in any case to my knowledge.
However, the same way as your new suggestion, you can replace OFFSET_OF
with sizeof. While this *can* lead to wasted space with certain
structure layouts (e.g. when the flexible array overlays padding bytes),
this is not the case here, and otherwise just loses you a few bytes. I
think this comes down to preference.
The pattern you mentioned arguably is less nice syntax when used
(involves address calculation and casting), but the biggest problem here
is alignment constraints. For packed structures, you lose the ability of
automatic unaligned accesses (irrelevant here because the structure is
manually padded anyway). For non-packed structures, you still need to
ensure the alignment requirement of the trailing array data is met
manually. With flexible array members, the compiler takes care of both
cases automatically.
Best regards,
Marvin
On 24.06.21 02:24, Kun Qin wrote:
Hi Marvin,
I would prefer not to rely on undefined behaviors from different
compilers. Instead of using flexible arrays, is it better to remove
the `Data` field, pack the structure and follow
"VARIABLE_LOCK_ON_VAR_STATE_POLICY" pattern?
In that case, OFFSET_OF will be forced to change to sizeof, and
read/write to `Data` will follow the range indicated by MessageLength.
But yes, that will enforce developers to update their platform level
implementations accordingly.
Regards,
Kun
On 06/23/2021 08:26, Laszlo Ersek wrote:
On 06/23/21 08:54, Marvin Häuser wrote:
On 22.06.21 17:34, Laszlo Ersek wrote:
On 06/18/21 11:37, Marvin Häuser wrote:
On 16.06.21 22:58, Kun Qin wrote:
On 06/16/2021 00:02, Marvin Häuser wrote:
2) Is it feasible yet with the current set of supported
compilers to
support flexible arrays?
My impression is that flexible arrays are already supported (as
seen
in UnitTestFrameworkPkg/PrivateInclude/UnitTestFrameworkTypes.h).
Please correct me if I am wrong.
Would you mind letting me know why this is applicable here? We are
trying to seek ideas on how to catch developer mistakes caused by
this
change. So any input is appreciated.
Huh, interesting. Last time I tried I was told about
incompatibilities
with MSVC, but I know some have been dropped since then (2005 and
2008
if I recall correctly?), so that'd be great to allow globally.
I too am surprised to see
"UnitTestFrameworkPkg/PrivateInclude/UnitTestFrameworkTypes.h". The
flexible array member is a C99 feature, and I didn't even know
that we
disallowed it for the sake of particular VS toolchains -- I
thought we
had a more general reason than just "not supported by VS versions X
and Y".
The behavior of OFFSET_OF() would be interesting -- the OFFSET_OF()
macro definition for non-gcc / non-clang:
#define OFFSET_OF(TYPE, Field) ((UINTN) &(((TYPE *)0)->Field))
borders on undefined behavior as far as I can tell, so its
behavior is
totally up to the compiler. It works thus far okay on Visual
Studio, but
I couldn't say if it extended correctly to flexible array members.
Yes, it's UB by the standard, but this is actually how MS implements
them (or used to anyway?). I don't see why it'd cause issues with
flexible arrays, as only the start of the array is relevant (which is
constant for all instances of the structure no matter the amount of
elements actually stored). Any specific concern? If so, they could be
addressed by appropriate STATIC_ASSERTs.
No specific concern; my point was that two aspects of the same "class"
of undefined behavior didn't need to be consistent with each other.
Thanks
Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#77186): https://edk2.groups.io/g/devel/message/77186
Mute This Topic: https://groups.io/mt/83435921/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
