This change is based on edk2-platforms-raspberrypi-pl011-bth-noflow.diff
in https://github.com/worproject/RPi-Bluetooth-Testing/ for enabling
Bluetooth and serial port (Mini UART) in Windows IOT.
Note that PL011 UART still doesn't work with Windows 10 IOT with this
change, but PL011 UART works fine with VMware ESXi-Arm Fling v1.3.
Therefore, there should be no issue with PL011 UART related changes,
and we will still need a Windows expert to take a further look in the
future. Making PL011 UART work properly with Windows 10 IOT may require
additional changes to Windows driver or firmware's ACPI table.
Testing Done:
- Successfully booted Windows Windows 10 IOT (20279.1) on SD (made by WOR)
with
the RPi-Windows-Drivers release ver 0.5 downloaded from
https://github.com/worproject/RPi-Windows-Drivers/releases
and checked that both Bluetooth and serial port (Mini UART) can
work fine.
- Successfully booted VMware ESXi-Arm Fling v1.3 with only serial
console connection (PL011 UART).
Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahm...@arm.com>
Cc: Sami Mujawar <sami.muja...@arm.com>
Cc: Jeremy Linton <jeremy.lin...@arm.com>
Cc: Pete Batard <p...@akeo.ie>
Cc: Ard Biesheuvel <ardb+tianoc...@kernel.org>
Cc: Mario Bălănică <mariobalanic...@gmail.com>
Signed-off-by: Sunny Wang <sunny.w...@arm.com>
---
Platform/RaspberryPi/AcpiTables/Uart.asl | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/Platform/RaspberryPi/AcpiTables/Uart.asl
b/Platform/RaspberryPi/AcpiTables/Uart.asl
index bac9d791eb..cb99086d39 100644
--- a/Platform/RaspberryPi/AcpiTables/Uart.asl
+++ b/Platform/RaspberryPi/AcpiTables/Uart.asl
@@ -30,6 +30,12 @@ Device (URT0)
{
MEMORY32FIXED (ReadWrite, 0, BCM2836_PL011_UART_LENGTH, RMEM)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) {
BCM2836_PL011_UART_INTERRUPT }
+
+ PinFunction (Exclusive, PullDown, BCM_ALT3, "\\_SB.GDV0.GPI0", 0,
ResourceConsumer, , ) { 32, 33 }
+
+ // fake the CTS signal as we don't support HW flow control yet
+ // BCM_ALT2 is set as output (low) by default
+ PinFunction (Exclusive, PullNone, BCM_ALT2, "\\_SB.GDV0.GPI0", 0,
ResourceConsumer, , ) { 31 }
})
Method (_CRS, 0x0, Serialized)
{
@@ -79,6 +85,11 @@ Device (URTM)
// from muxing the pins away.
// PinFunction (Exclusive, PullDown, BCM_ALT5, "\\_SB.GPI0", 0,
ResourceConsumer, , ) { 14, 15 }
+ PinFunction (Exclusive, PullDown, BCM_ALT5, "\\_SB.GDV0.GPI0", 0,
ResourceConsumer, , ) { 32, 33 }
+
+ // fake the CTS signal as we don't support HW flow control yet
+ // BCM_ALT2 is set as output (low) by default
+ PinFunction (Exclusive, PullNone, BCM_ALT2, "\\_SB.GDV0.GPI0", 0,
ResourceConsumer, , ) { 31 }
})
Method (_CRS, 0x0, Serialized)
{
@@ -143,10 +154,6 @@ Device(BTH0)
UAR0, // DescriptorName: creates name
// for offset of resource descriptor
) // Vendor data
- //
- // RPIQ connection for BT_ON/OFF
- //
- GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GDV0.RPIQ", 0,
ResourceConsumer, , ) { 128 }
})
//
@@ -190,10 +197,6 @@ Device(BTH0)
UARM, // DescriptorName: creates name
// for offset of resource descriptor
) // Vendor data
- //
- // RPIQ connection for BT_ON/OFF
- //
- GpioIO (Shared, PullUp, 0, 0, IoRestrictionNone, "\\_SB.GDV0.RPIQ", 0,
ResourceConsumer, , ) { 128 }
})
Method (_CRS, 0x0, Serialized)
--
2.31.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#75868): https://edk2.groups.io/g/devel/message/75868
Mute This Topic: https://groups.io/mt/83205747/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
