Etienne:
Thanks for your reminder. I try VS compiler and meet with the compiler error
on this line.
Here, does if ((SecCoreEntryAddress & 1) != 0) mean the lowest bit of this
address is 1?
Thanks
Liming
> -----邮件原件-----
> 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Etienne
> Carriere
> 发送时间: 2021年5月17日 15:35
> 收件人: gaoliming <gaolim...@byosoft.com.cn>
> 抄送: devel@edk2.groups.io; Achin Gupta <achin.gu...@arm.com>; Ard
> Biesheuvel <ardb+tianoc...@kernel.org>; Jiewen Yao
> <jiewen....@intel.com>; Leif Lindholm <l...@nuviainc.com>; Sami Mujawar
> <sami.muja...@arm.com>; Sughosh Ganu <sughosh.g...@linaro.org>; Bob
> Feng <bob.c.f...@intel.com>
> 主题: Re: [edk2-devel] [PATCH v2 3/5] GenFv: Arm: support images entered in
> Thumb mode
>
> On Mon, 17 May 2021 at 09:24, gaoliming <gaolim...@byosoft.com.cn>
> wrote:
> >
> > Acked-by: Liming Gao <gaolim...@byosoft.com.cn>
> >
> > > -----邮件原件-----
> > > 发件人: Etienne Carriere <etienne.carri...@linaro.org>
> > > 发送时间: 2021年5月17日 13:49
> > > 收件人: devel@edk2.groups.io
> > > 抄送: Achin Gupta <achin.gu...@arm.com>; Ard Biesheuvel
> > > <ardb+tianoc...@kernel.org>; Jiewen Yao <jiewen....@intel.com>; Leif
> > > Lindholm <l...@nuviainc.com>; Sami Mujawar
> <sami.muja...@arm.com>;
> > > Sughosh Ganu <sughosh.g...@linaro.org>; Etienne Carriere
> > > <etienne.carri...@linaro.org>; Bob Feng <bob.c.f...@intel.com>; Liming
> > > Gao <gaolim...@byosoft.com.cn>
> > > 主题: [PATCH v2 3/5] GenFv: Arm: support images entered in Thumb
> mode
> > >
> > > Change GenFv for Arm architecture to generate a specific jump
> > > instruction as image entry instruction, when the target entry label
> > > is assembled with Thumb instruction set. This is possible since
> > > SecCoreEntryAddress value fetched from the PE32 has its LSBit set when
> > > the entry instruction executes in Thumb mode.
> > >
> > > Cc: Bob Feng <bob.c.f...@intel.com>
> > > Cc: Liming Gao <gaolim...@byosoft.com.cn>
> > > Cc: Achin Gupta <achin.gu...@arm.com>
> > > Cc: Ard Biesheuvel <ardb+tianoc...@kernel.org>
> > > Cc: Leif Lindholm <l...@nuviainc.com>
> > > Cc: Sughosh Ganu <sughosh.g...@linaro.org>
> > > Signed-off-by: Etienne Carriere <etienne.carri...@linaro.org>
> > > ---
> > > Changes since v1:
> > > - Fix typos in commit log and inline comments
> > > - Change if() test operand to be an explicit boolean
> > > ---
> > > BaseTools/Source/C/GenFv/GenFvInternalLib.c | 38
> +++++++++++++++-----
> > > 1 file changed, 29 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/BaseTools/Source/C/GenFv/GenFvInternalLib.c
> > > b/BaseTools/Source/C/GenFv/GenFvInternalLib.c
> > > index 6e296b8ad6..5f3fd4f808 100644
> > > --- a/BaseTools/Source/C/GenFv/GenFvInternalLib.c
> > > +++ b/BaseTools/Source/C/GenFv/GenFvInternalLib.c
> > > @@ -34,9 +34,27 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> > > #include "FvLib.h"
> > > #include "PeCoffLib.h"
> > >
> > > -#define ARMT_UNCONDITIONAL_JUMP_INSTRUCTION
> > > 0xEB000000
> > > #define ARM64_UNCONDITIONAL_JUMP_INSTRUCTION
> > > 0x14000000
> > >
> > > +/*
> > > + * Arm instruction to jump to Fv entry instruction in Arm or Thumb mode.
> > > + * From ARM Arch Ref Manual versions b/c/d, section A8.8.25 BL, BLX
> > > (immediate)
> > > + * BLX (encoding A2) branches to offset in Thumb instruction set mode.
> > > + * BL (encoding A1) branches to offset in Arm instruction set mode.
> > > + */
> > > +#define ARM_JUMP_OFFSET_MAX 0xffffff
> > > +#define ARM_JUMP_TO_ARM(Offset) (0xeb000000 | ((Offset - 8) >>
> 2))
> > > +
> > > +#define _ARM_JUMP_TO_THUMB(Imm32) (0xfa000000 | \
> > > + (((Imm32) & (1 << 1)) << (24
> - 1))
> > > | \
> > > + (((Imm32) >> 2) & 0x7fffff))
> > > +#define ARM_JUMP_TO_THUMB(Offset)
> > > _ARM_JUMP_TO_THUMB((Offset) - 8)
> > > +
> > > +/*
> > > + * Arm instruction to retrun from exception (MOVS PC, LR)
> > > + */
> > > +#define ARM_RETURN_FROM_EXCEPTION 0xE1B0F07E
> > > +
> > > BOOLEAN mArm = FALSE;
> > > BOOLEAN mRiscV = FALSE;
> > > STATIC UINT32 MaxFfsAlignment = 0;
> > > @@ -2203,23 +2221,25 @@ Returns:
> > > // if we found an SEC core entry point then generate a branch
> > > instruction
> > > // to it and populate a debugger SWI entry as well
> > > if (UpdateVectorSec) {
> > > + UINT32 EntryOffset;
> > >
> > > VerboseMsg("UpdateArmResetVectorIfNeeded updating ARM
> SEC
> > > vector");
> > >
> > > - // B SecEntryPoint - signed_immed_24 part +/-32MB offset
> > > - // on ARM, the PC is always 8 ahead, so we're not really jumping
> > from
> > > the base address, but from base address + 8
> > > - ResetVector[0] = (INT32)(SecCoreEntryAddress -
> > > FvInfo->BaseAddress - 8) >> 2;
> > > + EntryOffset = (INT32)(SecCoreEntryAddress -
> FvInfo->BaseAddress);
> > >
> > > - if (ResetVector[0] > 0x00FFFFFF) {
> > > - Error(NULL, 0, 3000, "Invalid", "SEC Entry point must be within
> > > 32MB of the start of the FV");
> > > + if (EntryOffset > ARM_JUMP_OFFSET_MAX) {
> > > + Error(NULL, 0, 3000, "Invalid", "SEC Entry point offset above
> > > 1MB of the start of the FV");
> > > return EFI_ABORTED;
> > > }
> > >
> > > - // Add opcode for an unconditional branch with no link. i.e.: " B
> > > SecEntryPoint"
> > > - ResetVector[0] |=
> ARMT_UNCONDITIONAL_JUMP_INSTRUCTION;
> > > + if (SecCoreEntryAddress & 1 != 0) {
>
> Sorry, I missed this one.
> This needs extra parantheses.
>
> I'll sent a v3. My apologies...
>
> etienne
>
> > > + ResetVector[0] = ARM_JUMP_TO_THUMB(EntryOffset);
> > > + } else {
> > > + ResetVector[0] = ARM_JUMP_TO_ARM(EntryOffset);
> > > + }
> > >
> > > // SWI handler movs pc,lr. Just in case a debugger uses SWI
> > > - ResetVector[2] = 0xE1B0F07E;
> > > + ResetVector[2] = ARM_RETURN_FROM_EXCEPTION;
> > >
> > > // Place holder to support a common interrupt handler from
> ROM.
> > > // Currently not supported. For this to be used the reset vector
> > would
> > > not be in this FV
> > > --
> > > 2.17.1
> >
> >
> >
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#75197): https://edk2.groups.io/g/devel/message/75197
Mute This Topic: https://groups.io/mt/82881586/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
