This patch adds Readme.md file for Morello Platform. The document consists of information regarding the platform, steps to build and boot till UEFI Shell on the Morello FVP Platform.
Signed-off-by: Chandni Cherukuri <chandni.cheruk...@arm.com> --- Platform/ARM/Morello/Readme.md | 46 ++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/Platform/ARM/Morello/Readme.md b/Platform/ARM/Morello/Readme.md new file mode 100644 index 000000000000..8d441234f3b8 --- /dev/null +++ b/Platform/ARM/Morello/Readme.md @@ -0,0 +1,46 @@ +# Introduction + +Morello is an ARMv8-A platform that implements the capability architecture +extension. Capability architecture specific changes will be added [here](https://git.morello-project.org/morello). + +The platform port in UEFI firmware provides ARMv8-A architecture enablement. + +Platform code is located at Platform/ARM/Morello. + +# Documentation + +Further information on Morello Platform is available at this [page](https://developer.arm.com/architectures/cpu-architecture/a-profile/morello). + +# Morello FVP + +Morello FVP can be downloaded from this [location](https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps). + +# Supported Host and Toolchain + +- Host PC should be running Ubuntu Linux 18.04 LTS. +- Please refer to the `edk2-platforms/Readme.md` for downloading the GCC toolchain. + +# Build Instructions + +Please refer to the `edk2-platforms/Readme.md` for build instructions. + +# Dependencies + +Once the FVP is running, the SCP will be the first to boot and will bring the AP +core out of reset. The AP core will start executing Trusted Firmware-A at BL31 +and once it completes the execution, it will start executing UEFI. + +The SCP and TF-A binaries are required to boot to the UEFI Shell. + +## SCP Firmware + +The SCP firmware source code can be downloaded from this [page](https://github.com/ARM-software/SCP-firmware). + +Refer to the [SCP Readme](https://github.com/ARM-software/SCP-firmware/blob/master/user_guide.md) +for building SCP firmware. + +## Trusted Firmware-A (TF-A) + +The Trusted Firmware-A source code can be downloaded from this [page](https://trustedfirmware-a.readthedocs.io/en/latest/). + +Refer to the [TF-A Readme](https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/docs/plat/arm/morello/index.rst?h=refs/heads/master) for building TF-A. -- 2.17.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#73614): https://edk2.groups.io/g/devel/message/73614 Mute This Topic: https://groups.io/mt/81778212/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
