Add a document that provides information about the platforms supported by the package 'SgiPkg', the build environment, links to additional documentation and corresponding platform fvp.
Signed-off-by: Thomas Abraham <thomas.abra...@arm.com> Change-Id: If59c06b0ab2e4445f1c59499e43c544ba4ea40a2 --- Platform/ARM/SgiPkg/Readme.md | 35 ++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/Platform/ARM/SgiPkg/Readme.md b/Platform/ARM/SgiPkg/Readme.md new file mode 100644 index 000000000000..e5e0480beaab --- /dev/null +++ b/Platform/ARM/SgiPkg/Readme.md @@ -0,0 +1,35 @@ +Arm Neoverse Reference Design Platforms +======================================= + +# Introduction + +This document lists information related to the usage of EDKII firmware for Arm's +Neoverse Reference Design platforms. Details about Arm's Neoverse Reference +Design platforms is listed on this [page](https://gitlab.arm.com/arm-reference-solutions/arm-reference-solutions-docs/-/tree/master/docs/infra) + +The platform code is located under Platform/Arm/SgiPkg. Following platforms are +supported in this platform code. + +- [RD-N2](https://gitlab.arm.com/arm-reference-solutions/arm-reference-solutions-docs/-/tree/master/docs/infra/rdn2) +- [RD-V1](https://gitlab.arm.com/arm-reference-solutions/arm-reference-solutions-docs/-/tree/master/docs/infra/rdv1) +- [RD-V1-MC](https://gitlab.arm.com/arm-reference-solutions/arm-reference-solutions-docs/-/tree/master/docs/infra/rdv1mc) +- [RD-N1-Edge](https://gitlab.arm.com/arm-reference-solutions/arm-reference-solutions-docs/-/tree/master/docs/infra/rdn1edge) +- [RD-N1-Edge-X2](https://gitlab.arm.com/arm-reference-solutions/arm-reference-solutions-docs/-/tree/master/docs/infra/rdn1edgex2) +- [RD-E1-Edge](https://gitlab.arm.com/arm-reference-solutions/arm-reference-solutions-docs/-/tree/master/docs/infra/rde1edge) +- [SGI-575](https://gitlab.arm.com/arm-reference-solutions/arm-reference-solutions-docs/-/tree/master/docs/infra/sgi575) + +# Build Environment + +- x86 Linux host machines running Ubuntu 18.04 or later +- [Toolchain](https://developer.arm.com/-/media/Files/downloads/gnu-a/8.3-2019.03/binrel/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu.tar.xz) + +# How to build and execute + +Please follow top-level Readme.md for build instructions. For details on building +the rest of the software components and executing it using the platform FVP, use +the links to the respective platforms listed above. + +# Obtaining the platform fvp + +The fixed virtual platform for the supported platforms can be obtained +[here](https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps) -- 2.17.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#72511): https://edk2.groups.io/g/devel/message/72511 Mute This Topic: https://groups.io/mt/81153228/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
