Liming,
I agree with this approach. Changing the UEFI spec does not seem like a good
option because there
can be other implementations of the UEFI Spec or portions of it. Fixing the
EDK II implementation
and working with the community and all downstream consumers should be the focus
to make sure
everyone is informed of this change and its potential impact.
Mike
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of gaoliming
> Sent: Monday, September 21, 2020 6:23 PM
> To: 'Michael Kubacki' <michael.kuba...@outlook.com>; Ni, Ray
> <ray...@intel.com>; devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kin...@intel.com>; Liu, Zhiguang
> <zhiguang....@intel.com>
> Subject: 回复: [edk2-devel] [PATCH v1 1/1] MdePkg: Correct
> EFI_BLOCK_IO_PROTOCOL_REVISION3 value
>
> Michael and Ray:
> So far, I don't see the big impact with this change. I search
> Edk2/Edk2Platform code base. I only find MdeModulePkg ScsiDiskDxe
> installs BlkIo with revision 3, and PartitionDxe checks BlkIo revision. They
> are in the same package, and are used together. So,
> there is no impact for them. Now, the known impact is Disk Utility. The old
> binary Disk Utility may not work with the bios image
> built from the latest edk2 on ScsiDisk. I would suggest to clarify this
> impact in the release note of the stable tag 202011. If more
> impact is reported later, we can consider the solution again.
>
> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: Michael Kubacki <michael.kuba...@outlook.com>
> > 发送时间: 2020年9月22日 4:00
> > 收件人: Ni, Ray <ray...@intel.com>; devel@edk2.groups.io
> > 抄送: Kinney, Michael D <michael.d.kin...@intel.com>; Liming Gao
> > <gaolim...@byosoft.com.cn>; Liu, Zhiguang <zhiguang....@intel.com>
> > 主题: Re: [edk2-devel] [PATCH v1 1/1] MdePkg: Correct
> > EFI_BLOCK_IO_PROTOCOL_REVISION3 value
> >
> > I found the issue while manually reviewing some protocol structures
> > against the UEFI spec.
> >
> > I'm going to leave that question to the MdePkg and UEFI Specification
> > maintainers as changing the specification may have an impact on other
> > implementations that needs to be considered. My only preference on the
> > topic is that the edk2 implementation and UEFI Specification do not
> > conflict. Since the patch to match the value against the spec has been
> > submitted, I'm happy to make any potential modifications based on the
> > decision.
> >
> > Thanks,
> > Michael
> >
> > On 9/20/2020 7:28 PM, Ni, Ray wrote:
> > > Disk Utility code that consumes the REVISION3 macro:
> > > if (BlkIo->Revision >= EFI_BLOCK_IO_PROTOCOL_REVISION3 &&
> > > BlkIo->Media->OptimalTransferLengthGranularity != 0
> > > ) {
> > > //
> > > // Compute the least common multiple of
> > OptimalTransferLengthGranularity and LogicalBlocksPerPhysicalBlock
> > > //
> > > *OptimalTransferBlocks = Lcm (
> > > BlkIo->Media->OptimalTransferLengthGranularity,
> > > *OptimalTransferBlocks
> > > );
> > > }
> > >
> > > Even we could release a new version of tool with the correct value, there
> > > is
> > no way to inform the
> > > old tool users to do the upgrade.
> > >
> > > What caused the issue to be found?
> > > Would keeping the implementation unchanged but correcting the spec
> > content be the easier way?
> > >
> > > Thanks,
> > > Ray
> > >
> > >> -----Original Message-----
> > >> From: Michael Kubacki <michael.kuba...@outlook.com>
> > >> Sent: Saturday, September 19, 2020 8:26 AM
> > >> To: Ni, Ray <ray...@intel.com>; devel@edk2.groups.io
> > >> Cc: Kinney, Michael D <michael.d.kin...@intel.com>; Liming Gao
> > >> <gaolim...@byosoft.com.cn>; Liu, Zhiguang <zhiguang....@intel.com>
> > >> Subject: Re: [edk2-devel] [PATCH v1 1/1] MdePkg: Correct
> > >> EFI_BLOCK_IO_PROTOCOL_REVISION3 value
> > >>
> > >> What do you propose as an alternative?
> > >>
> > >> Can a new version of the tool be released with the correct value?
> > >>
> > >> Thanks,
> > >> Michael
> > >>
> > >> On 9/18/2020 4:53 PM, Ni, Ray wrote:
> > >>> As far as I know, EFI disk utility consumesthis new field for
> > >>> performance. The utility is in Intel website for external downloads.
> > >>>
> > >>> ------------------------------------------------------------------------
> > >>> *发件人:* devel@edk2.groups.io <devel@edk2.groups.io> 代表
> > Michael
> > >>> Kubacki <michael.kuba...@outlook.com>
> > >>> *发送时间:* Saturday, September 19, 2020 2:54:54 AM
> > >>> *收件人:* devel@edk2.groups.io <devel@edk2.groups.io>; Ni, Ray
> > >>> <ray...@intel.com>
> > >>> *抄送:* Kinney, Michael D <michael.d.kin...@intel.com>; Liming Gao
> > >>> <gaolim...@byosoft.com.cn>; Liu, Zhiguang <zhiguang....@intel.com>
> > >>> *主题:* Re: [edk2-devel] [PATCH v1 1/1] MdePkg: Correct
> > >>> EFI_BLOCK_IO_PROTOCOL_REVISION3 value
> > >>> Hi Ray,
> > >>>
> > >>> Rev3 adds the UINT32 field OptimalTransferLengthGranularity field to
> > >>> EFI_BLOCK_IO_MEDIA. A preexisting binary Block I/O producer that uses
> > >>> this field will set their revision to the higher value and the only
> > >>> check I see in edk2 (PartitionDxe) on the revision to access this field
> > >>> checks for >= EFI_BLOCK_IO_PROTOCOL_REVISION3.
> > >>>
> > >>> If a binary Block I/O producer is built with the new value that is
> > >>> consumed by a module built with the older value it might ignore the
> > >>> OptimalTransferLengthGranularity field. I do not see where this is the
> > >>> case in edk2 other than PartitionDxe which sets the
> > >>> OptimalTransferLengthGranularity field to zero for Rev3.
> > >>>
> > >>> You have contributed to this code in the past so feel free to provide
> > >>> any further insight if needed.
> > >>>
> > >>> That said, this change was made to fix a bug in the edk2 implementation
> > >>> to remove a conflict with the UEFI Spec, the two should be in agreement.
> > >>>
> > >>> I suggest the change be added to the next stable tag release notes so
> > >>> authors of such modules are made aware they should release an update
> > >>> with the new revision value.
> > >>>
> > >>> Thanks,
> > >>> Michael
> > >>>
> > >>> On 9/17/2020 6:25 PM, Ni, Ray wrote:
> > >>>> Mike,
> > >>>> Have you evaluated the impact to the already-released module that
> > relies
> > >> on the macro value?
> > >>>>
> > >>>> Basically, you changed to a smaller value that may cause a revision3
> > check
> > >> fail:
> > >>>> a released module expects the revision is bigger than 0x31, but the
> > value is
> > >> 0x1f.
> > >>>>
> > >>>> Thanks,
> > >>>> Ray
> > >>>>
> > >>>>> -----Original Message-----
> > >>>>> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > >> Michael Kubacki
> > >>>>> Sent: Tuesday, September 15, 2020 2:11 AM
> > >>>>> To: devel@edk2.groups.io
> > >>>>> Cc: Kinney, Michael D <michael.d.kin...@intel.com>; Liming Gao
> > >> <gaolim...@byosoft.com.cn>; Liu, Zhiguang
> > >>>>> <zhiguang....@intel.com>
> > >>>>> Subject: [edk2-devel] [PATCH v1 1/1] MdePkg: Correct
> > >> EFI_BLOCK_IO_PROTOCOL_REVISION3 value
> > >>>>>
> > >>>>> From: Michael Kubacki <michael.kuba...@microsoft.com>
> > >>>>>
> > >>>>> REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2961
> > >>>>>
> > >>>>> The value of EFI_BLOCK_IO_PROTOCOL_REVISION3 is currently
> > >>>>> 0x00020031. However, the value assigned in the UEFI Specification
> > >>>>> 2.8B is ((2<<16) | (31)) which is 0x0002001F.
> > >>>>>
> > >>>>> Cc: Michael D Kinney <michael.d.kin...@intel.com>
> > >>>>> Cc: Liming Gao <gaolim...@byosoft.com.cn>
> > >>>>> Cc: Zhiguang Liu <zhiguang....@intel.com>
> > >>>>> Signed-off-by: Michael Kubacki <michael.kuba...@microsoft.com>
> > >>>>> ---
> > >>>>> MdePkg/Include/Protocol/BlockIo.h | 2 +-
> > >>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
> > >>>>>
> > >>>>> diff --git a/MdePkg/Include/Protocol/BlockIo.h
> > >> b/MdePkg/Include/Protocol/BlockIo.h
> > >>>>> index 7b332691ede3..3bd76885e11c 100644
> > >>>>> --- a/MdePkg/Include/Protocol/BlockIo.h
> > >>>>> +++ b/MdePkg/Include/Protocol/BlockIo.h
> > >>>>> @@ -201,7 +201,7 @@ typedef struct {
> > >>>>>
> > >>>>> #define EFI_BLOCK_IO_PROTOCOL_REVISION 0x00010000
> > >>>>> #define EFI_BLOCK_IO_PROTOCOL_REVISION2 0x00020001
> > >>>>> -#define EFI_BLOCK_IO_PROTOCOL_REVISION3 0x00020031
> > >>>>> +#define EFI_BLOCK_IO_PROTOCOL_REVISION3 0x0002001F
> > >>>>>
> > >>>>> ///
> > >>>>> /// Revision defined in EFI1.1.
> > >>>>> --
> > >>>>> 2.28.0.windows.1
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#65473): https://edk2.groups.io/g/devel/message/65473
Mute This Topic: https://groups.io/mt/77023243/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
