Whitespace/style and typos:

On 2020.08.14 00:00, Jeremy Linton wrote:
Now that we have a thermal zone we can add active cooling
by specifying active cooling points (_ACx) which can
be tied to fan objects that turn fans on/off using GPIO
pins.

Cc: Leif Lindholm <l...@nuviainc.com>
Cc: Pete Batard <p...@akeo.ie>
Cc: Andrei Warkentin <awarken...@vmware.com>
Cc: Ard Biesheuvel <ard.biesheu...@arm.com>
Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahm...@arm.com>
Signed-off-by: Jeremy Linton <jeremy.lin...@arm.com>
---
  .../RaspberryPi/Drivers/ConfigDxe/SsdtThermal.asl  | 83 ++++++++++++++++++++++
  1 file changed, 83 insertions(+)
  create mode 100644 Platform/RaspberryPi/Drivers/ConfigDxe/SsdtThermal.asl

diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/SsdtThermal.asl 
b/Platform/RaspberryPi/Drivers/ConfigDxe/SsdtThermal.asl
new file mode 100644
index 0000000000..c87bda6dbc
--- /dev/null
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/SsdtThermal.asl
@@ -0,0 +1,83 @@
+/** @file
+ *
+ *  Secondary System Description Table (SSDT) for active (fan) cooling
+ *
+ *  Copyright (c) 2020, Arm Ltd. All rights reserved.
+ *
+ *  SPDX-License-Identifier: BSD-2-Clause-Patent
+ *
+ **/
+
+#include <IndustryStandard/Bcm2711.h>
+#include <IndustryStandard/Bcm2836.h>
+#include <IndustryStandard/Bcm2836Gpio.h>
+
+#include <IndustryStandard/Acpi.h>
+
+DefinitionBlock(__FILE__, "SSDT", 5, "RPIFDN", "RPITHFAN", 2)

Space before '('

+{
+#if (GPIO_FAN_PIN != 0)
+  External(\_SB_.EC0, DeviceObj)
+  External(\_SB_.EC0.TZ0, DeviceObj)
+
+  Scope (\_SB_.EC0)

3 x Space before '('

+  {
+      // Describe a fan
+      PowerResource(PFAN, 0, 0) {

Space before '('

+        OperationRegion (GPIO, SystemMemory, GPIO_BASE_ADDRESS, 0x1000)
+        Field (GPIO, DWordAcc, NoLock, Preserve) {
+          Offset(0x1C),

Space before '('

+          GPS0, 32,
+          GPS1, 32,
+          RES1, 32,
+          GPC0, 32,
+          GPC1, 32,
+          RES2, 32,
+          GPL1, 32,
+          GPL2, 32
+        }
+        // We are hitting a GPIO pin to on/off the fan
+        // this assumes that UEFI has programmed the
+        // direction as OUT.
+        // (search "rpi gpio fan controller" for how to
+        // wire this up if your not electrically inclined

"your" -> "you're"

+        // the basic idea is to use a BJT/etc to switch a
+        // larger voltage through a fan where the GPIO pin
+        // feeds a NPN/PNP base. Thats because its unlikly

"Thats" -> "That's", "unlikly" -> "unlikely"

+        // that the fan can be driven directly from the GPIO
+        // pin due to hitting the current limit on the pins.
+        // Matching a resistor between the GPIO->Base can
+        // allow pretty much any random NPN with a reasonable
+        // EC current to work (to limit the GPIO current).)
+        Method (_STA) {
+          if ( GPL1 & (1 << GPIO_FAN_PIN) ) {

No space between '(' and 'GPL1', as well as between the last 2 ')'

+            Return ( 1 )               // present and enabled

No spaces inside the parenthesis

+          }
+          Return ( 0 )

No spaces inside the parenthesis

+        }
+        Method (_ON)  {                //turn fan on
+          Store((1 << GPIO_FAN_PIN), GPS0)

Space before '('

+        }
+        Method (_OFF) {                //turn fan off
+          Store((1 << GPIO_FAN_PIN), GPC0)

Space before '('

+        }
+      }
+      Device(FAN) {

Space before '('

+        // Note, not currently an ACPIv4 fan
+        // the latter adds speed control/detection
+        // but in the case of linux needs FIF, FPS, FSL, and FST
+        Name(_HID, EISAID("PNP0C0B"))
+        Name(_PR0, Package() {PFAN})

2 x Space before '(', space after '{' and before '}'

+      }
+  }
+
+  // merge in an active cooling point.
+  Scope (\_SB_.EC0.TZ0)
+  {
+    Method(_AC0) { return(3332) }        // (60K) active cooling trip point,

Space before '('

+                                         // if this is lower than PSV then we
+                                         // prefer active cooling
+    Name(_AL0, Package(){\_SB_.EC0.FAN}) // the fan used for AC0 above

Space before '(' for 'Name' and 'Package', space after () of 'Package', space after '{' and before '}'

+  }
+#endif
+}


Reviewed-by: Pete Batard <p...@akeo.ie>

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#64313): https://edk2.groups.io/g/devel/message/64313
Mute This Topic: https://groups.io/mt/76178275/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to