From: Ard Biesheuvel <ard.biesheu...@arm.com>
The ChaosKey driver implements the UEFI driver model, and so it is
not guaranteed that any controllers will be attached to this driver
unless it is connected explicitly. On many platforms today, this is
taken care of by the ConnectAll() call that occurs in the BDS, but
this is not something we should rely on.
So add a protocol notification event that will attempt to connect
the ChaosKey on each USB I/O protocol instance that carries the
expected vendor and product IDs. This still relies on the USB host
controllers to be connected by the platform, which is typically the
case (given that a USB keyboard is required to interrupt the boot)
On platforms where USB is not connected at all by default, it is really
not up to a third party driver to meddle with this, and so relying on
the USB host controllers to have been connected non-reursively is the
best we can do. Note that third party drivers registered via Driver####
can set a 'reconnect all' flag if needed to mitigate this.
Signed-off-by: Ard Biesheuvel <ard.biesheu...@arm.com>
---
Unfortunately, the previous approach of connecting a short-form USB device
path containing the ChaosKey's VID/PID turned out not to be reliable in
practice (it doesn't work at all on ThunderX2 with AMI firmware)
So instead, we have to rely on USB I/O protocols having been instantiated
by the DXE core. This is what typically happens, given that USB keyboards
are also exposed via USB I/O protocol instances. The only difference with
a non-fast [ConnectAll()] boot is that those USB I/O protocol instances
are not connected further automatically, but it is reasonable to expect
that the handles themselves have been instantiated.
Platforms that do not produce those USB I/O handles would not be able to
offer the ability to interrupt the boot or enter the menu using a USB
keyboard, so this is rather rare in practice. Also, if such platforms do
exist, it is not up to this 3rd party driver to override this policy and
enumerate the entire USB hierarchy.
So this means we need to call UsbHwrngDriverBindingSupported() directly
to check whether the USB I/O protocol in question has the right VID/PID.
If that succeeds, there is really no point in using ConnectController(),
so just call UsbHwrngDriverBindingStart() directly to connect the driver
to the controller.
Tested on ThunderX2 using a Driver0000 option.
Silicon/Openmoko/ChaosKeyDxe/DriverBinding.c | 66 ++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/Silicon/Openmoko/ChaosKeyDxe/DriverBinding.c
b/Silicon/Openmoko/ChaosKeyDxe/DriverBinding.c
index e7d0d3fe563e..611803c6c339 100644
--- a/Silicon/Openmoko/ChaosKeyDxe/DriverBinding.c
+++ b/Silicon/Openmoko/ChaosKeyDxe/DriverBinding.c
@@ -11,6 +11,9 @@
#include "ChaosKeyDriver.h"
+STATIC VOID *mProtocolNotifyRegistration;
+STATIC EFI_EVENT mProtocolNotifyRegistrationEvent;
+
/**
Tests to see if this driver supports a given controller.
@@ -157,6 +160,55 @@ EFI_DRIVER_BINDING_PROTOCOL gUsbDriverBinding = {
};
+STATIC
+VOID
+EFIAPI
+UsbHwrngOnProtocolNotify (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE *Handles;
+ UINTN HandleCount;
+ UINTN Index;
+
+ do {
+ Status = gBS->LocateHandleBuffer (ByRegisterNotify, NULL,
+ mProtocolNotifyRegistration, &HandleCount, &Handles);
+ if (EFI_ERROR (Status)) {
+ if (Status != EFI_NOT_FOUND) {
+ DEBUG ((DEBUG_WARN, "%a: LocateHandleBuffer() failed - %r\n",
+ __FUNCTION__, Status));
+ }
+ return;
+ }
+
+ if (HandleCount == 0) {
+ return;
+ }
+
+ for (Index = 0; Index < HandleCount; Index++) {
+ Status = UsbHwrngDriverBindingSupported (&gUsbDriverBinding,
+ Handles[Index], NULL);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ //
+ // Attempt to connect the USB device path describing the ChaosKey
+ // hardware via the handle describing a USB host controller.
+ //
+ Status = UsbHwrngDriverBindingStart (&gUsbDriverBinding,
+ Handles[Index], NULL);
+ DEBUG ((DEBUG_VERBOSE, "%a: UsbHwrngDriverBindingStart () returned %r\n",
+ __FUNCTION__, Status));
+ }
+ gBS->FreePool (Handles);
+ } while (1);
+}
+
+
/**
The entry point of ChaosKey UEFI Driver.
@@ -185,6 +237,18 @@ EntryPoint (
NULL, &gChaosKeyDriverComponentName2);
ASSERT_EFI_ERROR (Status);
+ //
+ // This driver produces the EFI Random Number Generator protocol on
+ // compatible USB I/O handles, which is not a protocol that can provide
+ // a boot target. This means that it will not get connected on an ordinary
+ // 'fast' boot (which only connects the console and boot entry device paths)
+ // unless we take extra measures.
+ //
+ mProtocolNotifyRegistrationEvent = EfiCreateProtocolNotifyEvent (
+ &gEfiUsbIoProtocolGuid, TPL_CALLBACK,
+ UsbHwrngOnProtocolNotify, NULL,
+ &mProtocolNotifyRegistration);
+
DEBUG ((DEBUG_INIT | DEBUG_INFO, "*** Installed ChaosKey driver! ***\n"));
return EFI_SUCCESS;
@@ -211,6 +275,8 @@ UnloadImage (
UINTN HandleCount;
UINTN Index;
+ gBS->CloseEvent (mProtocolNotifyRegistrationEvent);
+
//
// Retrieve all USB I/O handles in the handle database
//
--
2.20.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#60585): https://edk2.groups.io/g/devel/message/60585
Mute This Topic: https://groups.io/mt/74627343/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
