---
MdePkg/Library/PciLibNull/PciLibNull.c | 1213 ++++++++++++++++++++
MdePkg/Library/PciLibNull/PciLibNull.inf | 25 +
2 files changed, 1238 insertions(+)
diff --git a/MdePkg/Library/PciLibNull/PciLibNull.c
b/MdePkg/Library/PciLibNull/PciLibNull.c
new file mode 100644
index
0000000000000000000000000000000000000000..c186ca9f86e5a0c860472b80209aae9b958a95d7
--- /dev/null
+++ b/MdePkg/Library/PciLibNull/PciLibNull.c
@@ -0,0 +1,1213 @@
+/** @file
+ Provides a NULL implementation of PCI services used to access
+ PCI Configuration Space.
+
+ Copyright (c) 2019 - 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/DebugLib.h>
+
+/**
+ Registers a PCI device so PCI configuration registers may be accessed after
+ SetVirtualAddressMap().
+
+ Registers the PCI device specified by Address so all the PCI configuration
+ registers associated with that PCI device may be accessed after
+ SetVirtualAddressMap() is called.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @retval RETURN_SUCCESS The PCI device was registered for runtime
+ access.
+ @retval RETURN_UNSUPPORTED An attempt was made to call this function
+ after ExitBootServices().
+ @retval RETURN_UNSUPPORTED The resources required to access the PCI
+ device at runtime could not be mapped.
+ @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
+ complete the registration.
+
+**/
+RETURN_STATUS
+EFIAPI
+PciRegisterForRuntimeAccess (
+ IN UINTN Address
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Reads an 8-bit PCI configuration register.
+
+ Reads and returns the 8-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @return The read value from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciRead8 (
+ IN UINTN Address
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Writes an 8-bit PCI configuration register.
+
+ Writes the 8-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned. This function must guarantee
+ that all PCI read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciWrite8 (
+ IN UINTN Address,
+ IN UINT8 Value
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise OR of an 8-bit PCI configuration register with
+ an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciOr8 (
+ IN UINTN Address,
+ IN UINT8 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
+ value.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciAnd8 (
+ IN UINTN Address,
+ IN UINT8 AndData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
+ value, followed by a bitwise OR with another 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and
+ the value specified by OrData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciAndThenOr8 (
+ IN UINTN Address,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in an 8-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciBitFieldRead8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 8-bit register is returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciBitFieldWrite8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 Value
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciBitFieldOr8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 8-bit register.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciBitFieldAnd8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciBitFieldAndThenOr8 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a 16-bit PCI configuration register.
+
+ Reads and returns the 16-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @return The read value from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciRead16 (
+ IN UINTN Address
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Writes a 16-bit PCI configuration register.
+
+ Writes the 16-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned. This function must guarantee
+ that all PCI read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciWrite16 (
+ IN UINTN Address,
+ IN UINT16 Value
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise OR of a 16-bit PCI configuration register with
+ a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciOr16 (
+ IN UINTN Address,
+ IN UINT16 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
+ value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 16-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciAnd16 (
+ IN UINTN Address,
+ IN UINT16 AndData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
+ value, followed a bitwise OR with another 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and
+ the value specified by OrData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciAndThenOr16 (
+ IN UINTN Address,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 16-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciBitFieldRead16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 16-bit register is returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciBitFieldWrite16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 Value
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciBitFieldOr16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 16-bit register.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 16-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciBitFieldAnd16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciBitFieldAndThenOr16 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a 32-bit PCI configuration register.
+
+ Reads and returns the 32-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @return The read value from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciRead32 (
+ IN UINTN Address
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Writes a 32-bit PCI configuration register.
+
+ Writes the 32-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned. This function must guarantee
+ that all PCI read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciWrite32 (
+ IN UINTN Address,
+ IN UINT32 Value
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise OR of a 32-bit PCI configuration register with
+ a 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciOr32 (
+ IN UINTN Address,
+ IN UINT32 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
+ value.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 32-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciAnd32 (
+ IN UINTN Address,
+ IN UINT32 AndData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
+ value, followed a bitwise OR with another 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and
+ the value specified by OrData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address Address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciAndThenOr32 (
+ IN UINTN Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 32-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciBitFieldRead32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 32-bit register is returned.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param Value New value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciBitFieldWrite32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 Value
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciBitFieldOr32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 32-bit register.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 32-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciBitFieldAnd32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If Address > 0x0FFFFFFF, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by
+ StartBit and EndBit, then ASSERT().
+
+ @param Address PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciBitFieldAndThenOr32 (
+ IN UINTN Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Reads a range of PCI configuration registers into a caller supplied buffer.
+
+ Reads the range of PCI configuration registers specified by StartAddress and
+ Size into the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be read. Size is
+ returned. When possible 32-bit PCI configuration read cycles are used to read
+ from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ and 16-bit PCI configuration read cycles may be used at the beginning and the
+ end of the range.
+
+ If StartAddress > 0x0FFFFFFF, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress Starting address that encodes the PCI Bus, Device,
+ Function and Register.
+ @param Size Size in bytes of the transfer.
+ @param Buffer Pointer to a buffer receiving the data read.
+
+ @return Size
+
+**/
+UINTN
+EFIAPI
+PciReadBuffer (
+ IN UINTN StartAddress,
+ IN UINTN Size,
+ OUT VOID *Buffer
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
+
+/**
+ Copies the data in a caller supplied buffer to a specified range of PCI
+ configuration space.
+
+ Writes the range of PCI configuration registers specified by StartAddress and
+ Size from the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be written. Size is
+ returned. When possible 32-bit PCI configuration write cycles are used to
+ write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ 8-bit and 16-bit PCI configuration write cycles may be used at the beginning
+ and the end of the range.
+
+ If StartAddress > 0x0FFFFFFF, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress Starting address that encodes the PCI Bus, Device,
+ Function and Register.
+ @param Size Size in bytes of the transfer.
+ @param Buffer Pointer to a buffer containing the data to write.
+
+ @return Size written to StartAddress.
+
+**/
+UINTN
+EFIAPI
+PciWriteBuffer (
+ IN UINTN StartAddress,
+ IN UINTN Size,
+ IN VOID *Buffer
+ )
+{
+ DEBUG ((DEBUG_ERROR, "ERROR: Function %a is not implemented\n", __func__));
+ ASSERT (FALSE);
+ return 0;
+}
diff --git a/MdePkg/Library/PciLibNull/PciLibNull.inf
b/MdePkg/Library/PciLibNull/PciLibNull.inf
new file mode 100644
index
0000000000000000000000000000000000000000..1778b4025e550939a6d13c5cc466567ce99ebaa5
--- /dev/null
+++ b/MdePkg/Library/PciLibNull/PciLibNull.inf
@@ -0,0 +1,25 @@
+#/** @file
+#
+# Null implementation of Pcilib
+#
+# Copyright (c) 2019, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = PciLibNull
+ FILE_GUID = C2E95ECC-9A39-4293-9F52-4C82BA370952
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PciLib
+
+
+[Sources]
+ PciLibNull.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
