On 12/03/19 17:16, Philippe Mathieu-Daude wrote:
> From: Antoine Coeur <co...@gmx.fr>
>
> Fix few typos in comments and documentation.
>
> Cc: Eric Dong <eric.d...@intel.com>
> Cc: Ray Ni <ray...@intel.com>
> Cc: Laszlo Ersek <ler...@redhat.com>
> Reviewed-by: Philippe Mathieu-Daude <phi...@redhat.com>
> Signed-off-by: Philippe Mathieu-Daude <phi...@redhat.com>
> ---
> UefiCpuPkg/CpuDxe/CpuDxe.h | 2 +-
> UefiCpuPkg/CpuDxe/CpuGdt.h | 2 +-
> UefiCpuPkg/CpuDxe/CpuMp.h | 4 ++--
> UefiCpuPkg/CpuDxe/CpuPageTable.h | 2 +-
> UefiCpuPkg/CpuDxe/CpuDxe.c | 8 ++++----
> UefiCpuPkg/CpuDxe/CpuGdt.c | 2 +-
> UefiCpuPkg/CpuDxe/CpuMp.c | 4 ++--
> UefiCpuPkg/CpuDxe/CpuPageTable.c | 6 +++---
> 8 files changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/UefiCpuPkg/CpuDxe/CpuDxe.h b/UefiCpuPkg/CpuDxe/CpuDxe.h
> index a6762f1a0b78..9299eaa63d8a 100644
> --- a/UefiCpuPkg/CpuDxe/CpuDxe.h
> +++ b/UefiCpuPkg/CpuDxe/CpuDxe.h
> @@ -208,7 +208,7 @@ CpuGetTimerValue (
> );
>
> /**
> - Set memory cacheability attributes for given range of memeory.
> + Set memory cacheability attributes for given range of memory.
>
> @param This Protocol instance structure
> @param BaseAddress Specifies the start address of the
> diff --git a/UefiCpuPkg/CpuDxe/CpuGdt.h b/UefiCpuPkg/CpuDxe/CpuGdt.h
> index e5c36f37b96a..3a0210b2f172 100644
> --- a/UefiCpuPkg/CpuDxe/CpuGdt.h
> +++ b/UefiCpuPkg/CpuDxe/CpuGdt.h
> @@ -1,5 +1,5 @@
> /** @file
> - C based implemention of IA32 interrupt handling only
> + C based implementation of IA32 interrupt handling only
> requiring a minimal assembly interrupt entry point.
>
> Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
> diff --git a/UefiCpuPkg/CpuDxe/CpuMp.h b/UefiCpuPkg/CpuDxe/CpuMp.h
> index e7e115fc8f3d..4ee171d8c491 100644
> --- a/UefiCpuPkg/CpuDxe/CpuMp.h
> +++ b/UefiCpuPkg/CpuDxe/CpuMp.h
> @@ -147,7 +147,7 @@ GetProcessorInfo (
> and releases the BSP to continue with other tasks.
> -# The caller can use the CheckEvent() and WaitForEvent() services to
> check
> the state of the WaitEvent created in step 1.
> - -# When the APs complete their task or TimeoutInMicroSecondss expires,
> the MP
> + -# When the APs complete their task or TimeoutInMicroSeconds expires,
> the MP
> Service signals WaitEvent by calling the EFI SignalEvent() function.
> If
> FailedCpuList is not NULL, its content is available when WaitEvent is
> signaled. If all APs returned from Procedure prior to the timeout,
> then
> @@ -254,7 +254,7 @@ StartupAllAPs (
> This function is used to dispatch one enabled AP to the function specified
> by
> Procedure passing in the argument specified by ProcedureArgument. If
> WaitEvent
> is NULL, execution is in blocking mode. The BSP waits until the AP
> finishes or
> - TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking
> mode.
> + TimeoutInMicroSeconds expires. Otherwise, execution is in non-blocking
> mode.
> BSP proceeds to the next task without waiting for the AP. If a
> non-blocking mode
> is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is
> signaled,
> then EFI_UNSUPPORTED must be returned.
> diff --git a/UefiCpuPkg/CpuDxe/CpuPageTable.h
> b/UefiCpuPkg/CpuDxe/CpuPageTable.h
> index bad6784bcb51..0b2a02a2be5c 100644
> --- a/UefiCpuPkg/CpuDxe/CpuPageTable.h
> +++ b/UefiCpuPkg/CpuDxe/CpuPageTable.h
> @@ -78,7 +78,7 @@ VOID *
>
> Caller should make sure BaseAddress and Length is at page boundary.
>
> - Caller need guarentee the TPL <= TPL_NOTIFY, if there is split page
> request.
> + Caller need guarantee the TPL <= TPL_NOTIFY, if there is split page
> request.
>
> @param PagingContext The paging context. NULL means get page table
> from current CPU context.
> @param BaseAddress The physical address that is the start address
> of a memory region.
> diff --git a/UefiCpuPkg/CpuDxe/CpuDxe.c b/UefiCpuPkg/CpuDxe/CpuDxe.c
> index 7d7270e10b4a..a571fc3b1750 100644
> --- a/UefiCpuPkg/CpuDxe/CpuDxe.c
> +++ b/UefiCpuPkg/CpuDxe/CpuDxe.c
> @@ -393,7 +393,7 @@ CpuSetMemoryAttributes (
>
> //
> // If this function is called because GCD SetMemorySpaceAttributes () is
> called
> - // by RefreshGcdMemoryAttributes (), then we are just synchronzing GCD
> memory
> + // by RefreshGcdMemoryAttributes (), then we are just synchronizing GCD
> memory
> // map with MTRR values. So there is no need to modify MTRRs, just return
> immediately
> // to avoid unnecessary computing.
> //
> @@ -456,7 +456,7 @@ CpuSetMemoryAttributes (
> CurrentCacheType = MtrrGetMemoryAttribute(BaseAddress);
> if (CurrentCacheType != CacheType) {
> //
> - // call MTRR libary function
> + // call MTRR library function
> //
> Status = MtrrSetMemoryAttribute (
> BaseAddress,
> @@ -831,7 +831,7 @@ RefreshMemoryAttributesFromMtrr (
> Attributes = CurrentAttributes;
> } else {
> //
> - // If fixed MTRR attribute changed, then set memory attribute for
> previous atrribute
> + // If fixed MTRR attribute changed, then set memory attribute for
> previous attribute
> //
> if (CurrentAttributes != Attributes) {
> SetGcdMemorySpaceAttributes (
> @@ -1045,7 +1045,7 @@ IntersectMemoryDescriptor (
> @param Length Length of the MMIO space.
> @param Capabilities Capabilities of the MMIO space.
>
> - @retval EFI_SUCCES The MMIO space was added successfully.
> + @retval EFI_SUCCESS The MMIO space was added successfully.
> **/
> EFI_STATUS
> AddMemoryMappedIoSpace (
> diff --git a/UefiCpuPkg/CpuDxe/CpuGdt.c b/UefiCpuPkg/CpuDxe/CpuGdt.c
> index 87fd6955f24b..64efadeba601 100644
> --- a/UefiCpuPkg/CpuDxe/CpuGdt.c
> +++ b/UefiCpuPkg/CpuDxe/CpuGdt.c
> @@ -1,5 +1,5 @@
> /** @file
> - C based implemention of IA32 interrupt handling only
> + C based implementation of IA32 interrupt handling only
> requiring a minimal assembly interrupt entry point.
>
> Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
> diff --git a/UefiCpuPkg/CpuDxe/CpuMp.c b/UefiCpuPkg/CpuDxe/CpuMp.c
> index de6c6a5c330c..60ede38df4fc 100644
> --- a/UefiCpuPkg/CpuDxe/CpuMp.c
> +++ b/UefiCpuPkg/CpuDxe/CpuMp.c
> @@ -164,7 +164,7 @@ GetProcessorInfo (
> and releases the BSP to continue with other tasks.
> -# The caller can use the CheckEvent() and WaitForEvent() services to
> check
> the state of the WaitEvent created in step 1.
> - -# When the APs complete their task or TimeoutInMicroSecondss expires,
> the MP
> + -# When the APs complete their task or TimeoutInMicroSeconds expires,
> the MP
> Service signals WaitEvent by calling the EFI SignalEvent() function.
> If
> FailedCpuList is not NULL, its content is available when WaitEvent is
> signaled. If all APs returned from Procedure prior to the timeout,
> then
> @@ -281,7 +281,7 @@ StartupAllAPs (
> This function is used to dispatch one enabled AP to the function specified
> by
> Procedure passing in the argument specified by ProcedureArgument. If
> WaitEvent
> is NULL, execution is in blocking mode. The BSP waits until the AP
> finishes or
> - TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking
> mode.
> + TimeoutInMicroSeconds expires. Otherwise, execution is in non-blocking
> mode.
> BSP proceeds to the next task without waiting for the AP. If a
> non-blocking mode
> is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is
> signaled,
> then EFI_UNSUPPORTED must be returned.
> diff --git a/UefiCpuPkg/CpuDxe/CpuPageTable.c
> b/UefiCpuPkg/CpuDxe/CpuPageTable.c
> index cb121771425a..0a02cb3f6b7e 100644
> --- a/UefiCpuPkg/CpuDxe/CpuPageTable.c
> +++ b/UefiCpuPkg/CpuDxe/CpuPageTable.c
> @@ -776,7 +776,7 @@ ConvertMemoryPageAttributes (
> }
>
> //
> - // Below logic is to check 2M/4K page to make sure we donot waist memory.
> + // Below logic is to check 2M/4K page to make sure we do not waste memory.
> //
> Status = EFI_SUCCESS;
> while (Length != 0) {
> @@ -838,7 +838,7 @@ Done:
>
> Caller should make sure BaseAddress and Length is at page boundary.
>
> - Caller need guarentee the TPL <= TPL_NOTIFY, if there is split page
> request.
> + Caller need guarantee the TPL <= TPL_NOTIFY, if there is split page
> request.
>
> @param[in] PagingContext The paging context. NULL means get page
> table from current CPU context.
> @param[in] BaseAddress The physical address that is the start
> address of a memory region.
> @@ -969,7 +969,7 @@ RefreshGcdMemoryAttributesFromPaging (
> );
> if (EFI_ERROR (Status)) {
> //
> - // If we cannot udpate the capabilities, we cannot update its
> + // If we cannot update the capabilities, we cannot update its
> // attributes either. So just simply skip current block of memory.
> //
> DEBUG ((
>
Reviewed-by: Laszlo Ersek <ler...@redhat.com>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#51666): https://edk2.groups.io/g/devel/message/51666
Mute This Topic: https://groups.io/mt/65943983/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
