That is the only reason the IDTs are different.

Earlier in this project, the same IDT was used by BSP and
APs.  This meant APs could call PEI Services and we did not
know until there was a side effect.  By using different IDTs,
we catch APs calling PEI Services immediately.

Mike

> -----Original Message-----
> From: Tiger Liu(BJ-RD) <tiger...@zhaoxin.com>
> Sent: Monday, November 18, 2019 5:21 PM
> To: Kinney, Michael D <michael.d.kin...@intel.com>;
> devel@edk2.groups.io
> Subject: Re: [edk2-devel] [edk2] AP core : call
> GetPeiServicesTablePointer function hang
> 
> Hi, Mike:
> Got it!
> Thank you very much!
> 
> I have another question:
> Why does AP use an IDT table which is different with
> BSP?
> Is there other concern?
> 
> Thanks
> -----邮件原件-----
> 发件人: Kinney, Michael D <michael.d.kin...@intel.com>
> 发送时间: 2019年11月19日 0:27
> 收件人: devel@edk2.groups.io; Tiger Liu(BJ-RD)
> <tiger...@zhaoxin.com>; Kinney, Michael D
> <michael.d.kin...@intel.com>
> 主题: RE: [edk2-devel] [edk2] AP core : call
> GetPeiServicesTablePointer function hang
> 
> PEI Phase execution environment is focused on BSP
> execution.
> The PEI Services and most of the PPI services are not
> designed to be MP safe.  Since it is not safe for an AP
> to call PEI Services, the IDT entry with the pointer to
> the PEI Service Table is not available to an AP to
> prevent code from incorrectly calling a PEI Service
> from an AP.
> 
> It is legal to run code on an AP in the PEI Phase, but
> the code executed must be carefully designed to not use
> PEI Services and is usually designed to execute using
> only stack/memory and system resources that have
> assigned for exclusive access by an AP.
> This is usually communicated from BSP to an AP through
> a mailbox in memory.  If an AP needs something like a
> PEI Service (e.g.
> memory allocation or logging), then the AP should make
> that request to the BSP to perform that operation for
> the AP.
> 
> Mike
> 
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On
> Behalf Of Tiger
> > Liu(BJ-RD)
> > Sent: Monday, November 18, 2019 1:08 AM
> > To: devel@edk2.groups.io
> > Subject: [edk2-devel] [edk2] AP core : call
> GetPeiServicesTablePointer
> > function hang
> >
> > Dear All:
> > I met a question during debug multi-processor code.
> >
> > I found if AP's procedure call
> > GetPeiServicesTablePointer function , then it would
> hang.
> > GetPeiServicesTablePointer (
> >   VOID
> >   )
> > {
> >   CONST EFI_PEI_SERVICES  **PeiServices;
> >   IA32_DESCRIPTOR   Idtr;
> >
> >   AsmReadIdtr (&Idtr);
> >   PeiServices = (CONST EFI_PEI_SERVICES **)
> (*(UINTN*)(Idtr.Base -
> > sizeof (UINTN)));
> >   ASSERT (PeiServices != NULL);
> >   return PeiServices;
> > }
> >
> > It seems BSP and AP use different IDT table? Why?
> >
> > Thanks
> >
> >
> > 保密声明:
> > 本邮件含有保密或专有信息,仅供指定收件人使用。严禁对本邮件或其内
> 容
> > 做任何未经授权的查阅、使用、复制或转发。
> > CONFIDENTIAL NOTE:
> > This email contains confidential or legally
> privileged information and
> > is for the sole use of its intended recipient. Any
> unauthorized
> > review, use, copying or forwarding of this email or
> the content of
> > this email is strictly prohibited.
> >
> > 
> 
> 
> 
> 保密声明:
> 本邮件含有保密或专有信息,仅供指定收件人使用。严禁对本邮件或其内容
> 做任何未经授权的查阅、使用、复制或转发。
> CONFIDENTIAL NOTE:
> This email contains confidential or legally privileged
> information and is for the sole use of its intended
> recipient. Any unauthorized review, use, copying or
> forwarding of this email or the content of this email
> is strictly prohibited.

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#50854): https://edk2.groups.io/g/devel/message/50854
Mute This Topic: https://groups.io/mt/60171891/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to