Yes, I did change proxy.config.url_remap.remap_required to '0' and now it
works through VisualWget.
Thanks.
On Tue, Nov 23, 2010 at 12:55 PM, ming....@gmail.com <ming....@gmail.com>wrote:
> the common forwarding proxy should at least set:
> * traffic_line -s proxy.config.reverse_proxy.enabled -v 0
> * traffic_line -s proxy.config.url_remap.remap_required -v 0
> have you change proxy.config.url_remap.remap_required to '0'? the
> default is '1' for reverse proxy.
>
>
> 在 2010-11-23二的 12:42 +0530，Gracy F写道：
> > I am testing it as a web proxy. Forwarding few http request via my ATS. I
> > have not changed much of the defaults in records.config file & other
> .config
> > files except a few
> >
> > CONFIG proxy.config.http.send_http11_requests INT 1
> > CONFIG proxy.config.http.chunking_enabled INT 0
> > CONFIG proxy.config.reverse_proxy.enabled INT 1
> > CONFIG proxy.config.http.ssl_ports STRING *
> > CONFIG proxy.config.http.anonymize_insert_client_ip INT 0
> > CONFIG proxy.config.reverse_proxy.enabled INT 0
> > CONFIG proxy.config.http.server_port INT 80
> >
> > 2010/11/22 Igor Galić <i.ga...@brainsware.org>
> >
> > >
> > > ----- "Gracy F" <grac...@gmail.com> wrote:
> > >
> > > > Hi All,
> > > > I am in the process of testing ATS/2.1.3 which I have built locally
> > > > without
> > > > any modifications to the code from trunk.
> > >
> > > The current release is 2.1.4, or if you're brave, just use trunk as
> such.
> > >
> > > > When I tested TS with VisualWGET by just passing http and https
> > > > requests, I
> > > > get the following errors, but visualwget says it connects to the
> proxy
> > > > and
> > > > shows the ip and port.
> > > >
> > > > *The errors are :
> > >
> > > aehm... yeah, but what are you testing? How have you configured the
> server?
> > >
> > >
> > > > For https:// requests:
> > > > ===============
> > > > Proxy tunneling failed: Not FoundUnable to establish SSL connection
> > > >
> > > > http:// requests:
> > > > =============
> > > > Connecting to 205.188.225.35:80... connected.
> > > > Proxy request sent, awaiting response... 404 Not Found
> > > > 2010-11-22 18:41:49 ERROR 404: Not Found.*
> > > >
> > > > I have enabled the logs in records.config and in .err file I couldn't
> > > > find
> > > > any errors in the debug messages. Few of the debug messages are
> > > > *[Nov 22 08:12:23.277] Server {1506704272} DEBUG: (http_tproxy)
> > > > Marking
> > > > accepted connect on 9cb8548 as not outbound transparent.
> > > > ....
> > > > [Nov 22 08:12:23.277] Server {1437907024} DEBUG: (http_cs) [55]
> > > > session
> > > > born, netvc 0x9cf9b50
> > > > [Nov 22 08:12:23.277] Server {1437907024} DEBUG: (http_cs) [55] using
> > > > accept
> > > > inactivity timeout [120 seconds]
> > > > [Nov 22 08:12:23.277] Server {1437907024} DEBUG: (http_cs) [55]
> > > > Starting
> > > > transaction 1 using sm [55]
> > > > [Nov 22 08:12:23.277] Server {1437907024} DEBUG: (http) [55]
> > > > [HttpSM::main_handler, VC_EVENT_READ_READY]
> > > > [Nov 22 08:12:23.277] Server {1437907024} DEBUG: (http) [55]
> > > > [&HttpSM::state_read_client_request_header, VC_EVENT_READ_READY]
> > > > [Nov 22 08:12:23.277] Server {1437907024} DEBUG: (http) [55] done
> > > > parsing
> > > > client request header
> > > > ......
> > > >
> > > > *How do I solve this ? What has gone wrong in the build ?
> > > > Any help would be great.
> > > >
> > > > Thanks,
> > > > GG
> > >
> > > i
> > >
> > > --
> > > Igor Galić
> > >
> > > Tel: +43 (0) 664 886 22 883
> > > Mail: i.ga...@brainsware.org
> > > URL: http://brainsware.org/
> > >
> >
> >
> >
>
>
>
--
Cheers,
Gracy
" Deal with the faults of others as gently as with your own"
