Thanks Mark, just figured that myself, i wasn't using the latest OVS, so
mtu_request wasn't working.. Appreciate your help.

Regards
Kapil.

On Tue, Sep 27, 2016 at 8:47 PM, Kavanagh, Mark B <mark.b.kavan...@intel.com
> wrote:

> >
> >Hi,
> >
> >Is there a way to configure MTU for dpdk and vhost ports from its default
> 1500 ?
> >I read, "with OVS, Normally the MTU should be changed using operating
> system specific
> >interfaces (e.g. ifconfig).", but as they are dpdk ports, how can i
> configure them ?
> >
>
> Hi Kapil,
>
> Depending on the version of OvS that you're using, you may use the
> Interface's 'mtu_request' field to modify the MTU of DPDK-type ports.
>
> From INSTALL.DPDK-ADVANCED.md:
>
>         "By default, DPDK ports are configured with standard Ethernet MTU
> (1500B). To
>         enable Jumbo Frames support for a DPDK port, change the
> Interface's `mtu_request`
>         attribute to a sufficiently large value.
>
>         e.g. Add a DPDK Phy port with MTU of 9000:
>
>         `ovs-vsctl add-port br0 dpdk0 -- set Interface dpdk0 type=dpdk --
> set Interface dpdk0 mtu_request=9000`
>
>         e.g. Change the MTU of an existing port to 6200:
>
>         `ovs-vsctl set Interface dpdk0 mtu_request=6200`"
>
> This functionality is currently supported on OvS Master and 2.6 branches.
>
> Hope this helps,
> Mark
>
> >Regards
> >Kapil
>
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev

Reply via email to