On 11 June 2016 at 05:28, Brian Turek <brian.tu...@gmail.com> wrote:
> Signed-off-by: Brian Turek <brian.tu...@gmail.com>
>
Thank you for your contribution. How did you send this patch? I couldn't
apply it on my local tree using 'git am'. Sending it via 'git send-email'
usually gets it right.
The change in the patch itself is not much, so I took a look. The thing
that concerns me a bit with this patch is that I could potentially run
commands of the form:
utilities/ovs-docker add-port br-int eth1 f5f314682193 --vlan="2 -- set
bridge br-int external_ids:hello=hi"
We could avoid it by doing something like this instead:
diff --git a/utilities/ovs-docker b/utilities/ovs-docker
index 43cea54..82c0343 100755
--- a/utilities/ovs-docker
+++ b/utilities/ovs-docker
@@ -90,6 +90,10 @@ add_port () {
MTU=`expr X"$1" : 'X[^=]*=\(.*\)'`
shift
;;
+ --vlan=*)
+ TAG=`expr X"$1" : 'X[^=]*=\(.*\)'`
+ shift
+ ;;
*)
echo >&2 "$UTIL add-port: unknown option \"$1\""
exit 1
@@ -134,6 +138,15 @@ add_port () {
exit 1
fi
+ if [ -n "$TAG" ]; then
+ if ovs_vsctl set port "${PORTNAME}_l" tag="$TAG"; then :; else
+ echo >&2 "$UTIL: Failed to set vlan $tag"
+ ovs_vsctl del-port "${PORTNAME}_l"
+ ip link delete "${PORTNAME}_l"
+ exit 1
+ fi
+ fi
+
ip link set "${PORTNAME}_l" up
>
> diff --git a/utilities/ovs-docker b/utilities/ovs-docker
> index 43cea54..98892b6 100755
> --- a/utilities/ovs-docker
> +++ b/utilities/ovs-docker
> @@ -90,6 +90,10 @@ add_port () {
> MTU=`expr X"$1" : 'X[^=]*=\(.*\)'`
> shift
> ;;
> + --vlan=*)
> + TAG="tag=$(expr X"$1" : 'X[^=]*=\(.*\)')"
> + shift
> + ;;
> *)
> echo >&2 "$UTIL add-port: unknown option \"$1\""
> exit 1
> @@ -126,7 +130,7 @@ add_port () {
>
> # Add one end of veth to OVS bridge.
> if ovs_vsctl --may-exist add-port "$BRIDGE" "${PORTNAME}_l" \
> - -- set interface "${PORTNAME}_l" \
> + $TAG -- set interface "${PORTNAME}_l" \
> external_ids:container_id="$CONTAINER" \
> external_ids:container_iface="$INTERFACE"; then :; else
> echo >&2 "$UTIL: Failed to add "${PORTNAME}_l" port to bridge
> $BRIDGE"
> @@ -224,15 +228,15 @@ usage: ${UTIL} COMMAND
> Commands:
> add-port BRIDGE INTERFACE CONTAINER [--ipaddress="ADDRESS"]
> [--gateway=GATEWAY] [--macaddress="MACADDRESS"]
> - [--mtu=MTU]
> + [--mtu=MTU] [--vlan=VLAN]
> Adds INTERFACE inside CONTAINER and connects it as a
> port
> in Open vSwitch BRIDGE. Optionally, sets ADDRESS on
> INTERFACE. ADDRESS can include a '/' to represent
> network
> - prefix length. Optionally, sets a GATEWAY, MACADDRESS
> - and MTU. e.g.:
> + prefix length. Optionally, sets a GATEWAY, MACADDRESS,
> + MTU, and VLAN. e.g.:
> ${UTIL} add-port br-int eth1 c474a0e2830e
> --ipaddress=192.168.1.2/24 --gateway=192.168.1.1
> - --macaddress="a2:c3:0d:49:7f:f8" --mtu=1450
> + --macaddress="a2:c3:0d:49:7f:f8" --mtu=1450 --vlan=10
> del-port BRIDGE INTERFACE CONTAINER
> Deletes INTERFACE inside CONTAINER and removes its
> connection to Open vSwitch BRIDGE. e.g.:
> _______________________________________________
> dev mailing list
> dev@openvswitch.org
> http://openvswitch.org/mailman/listinfo/dev
>
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev
