Hi, Thanks for the information. What will be the best way to implement hierarchical qos in this case? Thanks, Faseela
-----Original Message----- From: Justin Pettit [mailto:jpet...@ovn.org] Sent: Monday, April 11, 2016 12:05 AM To: Faseela K Cc: ovs dev Subject: Re: [ovs-dev] Applying QoS on Logical Ports Please don't drop the list. Yes, that's possible, since veth pairs show up as proper Linux devices. --Justin > On Apr 10, 2016, at 7:55 AM, Faseela K <faseel...@ericsson.com> wrote: > > Hi Justin, > Thanks for your reply. > I read some answer on ovs-discuss forum, where they mentioned they were > able to achieve qos on veth pair between bridges. > Is that possible? > http://openvswitch.org/pipermail/discuss/2015-April/017452.html > > Thanks, > Faseela > > -----Original Message----- > From: Justin Pettit [mailto:jpet...@ovn.org] > Sent: Saturday, April 09, 2016 3:06 AM > To: Faseela K > Cc: dev@openvswitch.org > Subject: Re: [ovs-dev] Applying QoS on Logical Ports > > >> On Apr 8, 2016, at 7:25 AM, Faseela K <faseel...@ericsson.com> wrote: >> >> Hi, >> Can QoS be applied on any logical ports, say for example : patch ports or >> tunnel ports? > > It works on ports that are Linux devices, so it would work on physical > devices, tap devices, etc. Patch ports are purely an OVS userspace > construct, so QoS would not work on them. I checked with Pravin, and while > tunnel ports have Linux devices, they wouldn't work properly, since the SKBs > aren't fully populated when they see them. You can apply QoS to the physical > port that the tunnel goes through, though, which is typically what's wanted. > > --Justin > > _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
