Try this patch: http://openvswitch.org/pipermail/dev/2016-March/068429.html Should work with older QEMU.
Best regards, Ilya Maximets. On 23.03.2016 14:37, Federico Iezzi wrote: > Hello Ilya, > > When you have wrote the patch could you post it also here as well? > > Thanks! > Federico > > On Wed, Mar 23, 2016 at 11:09 AM, Ilya Maximets <i.maxim...@samsung.com > <mailto:i.maxim...@samsung.com>> wrote: > > On 23.03.2016 13:03, Mauricio Vásquez wrote: > > It works, > > > > Then the INSTALL.DPDK file is wrong, It says that QEMU version v2.1.0+ > is required, it even says that v1.6.2 would work using a different command > line. > > > > Is QEMU 2.5 also required for vhost-cuse? > > > > Would you mind updating that file as you know the details better than > me? > > > > Thanks. > > Actually, now I think that this is a bug. > We should mark default queue pair as enabled by default to > support older versions of QEMU and vhost-cuse. > > I'll try to fix OVS to change this behaviour. After that > all will work with older versions of QEMU. > > Thanks for reporting. > > Best regards, Ilya Maximets. > > > > > > > On Wed, Mar 23, 2016 at 10:21 AM, Ilya Maximets <i.maxim...@samsung.com > <mailto:i.maxim...@samsung.com> <mailto:i.maxim...@samsung.com > <mailto:i.maxim...@samsung.com>>> wrote: > > > > On 23.03.2016 12:19, Mauricio Vásquez wrote: > > > Hi IIya, > > > > > > I'm using DPDK 2.2.0 and QEMU 2.2.1. > > > > You should use QEMU 2.5. > > > > > On Wed, Mar 23, 2016 at 10:18 AM, Ilya Maximets > <i.maxim...@samsung.com <mailto:i.maxim...@samsung.com> > <mailto:i.maxim...@samsung.com <mailto:i.maxim...@samsung.com>> > <mailto:i.maxim...@samsung.com <mailto:i.maxim...@samsung.com> > <mailto:i.maxim...@samsung.com <mailto:i.maxim...@samsung.com>>>> wrote: > > > > > > What version of DPDK and QEMU you're using with OVS 2.5? > > > > > > On 23.03.2016 12:11, Mauricio Vásquez wrote: > > > > Dear all, > > > > > > > > I am testing a setup where two VMs have to communicate > using vhost-user ports, it works using OvS 2.4 but it does not work with the > master version nor with 2.5. > > > > > > > > The setup is quite simple, a pair of VMs connected to OvS > using vhost-user ports, two flows configured to forward the packets between > the VMs, ping is used to test connectivity between the VMs (ips and routing > tables are configured). > > > > > > > > The problem that I can see is that a vhost-user port is > dropping packets on transmission: > > > > > > > > OFPST_PORT reply (xid=0x2): 3 ports > > > > port 1: > > > > rx pkts=330, bytes=14172, drop=?, errs=0, frame=?, > over=?, crc=? > > > > tx pkts=0, bytes=0, drop=8, errs=?, coll=? > > > > > > > > port LOCAL: > > > > rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0 > > > > tx pkts=0, bytes=0, drop=0, errs=0, coll=0 > > > > > > > > port 2: > > > > rx pkts=8, bytes=648, drop=?, errs=0, frame=?, over=?, > crc=? > > > > tx pkts=0, bytes=0, drop=330, errs=?, coll=? > > > > > > > > I found that somebody has a similar problem: > http://openvswitch.org/pipermail/dev/2016-March/067152.html, I tried to > change pmd-cpu-mask but the problem is always there. I did some debug and the > problems is that qid is always -1 in the function __netdev_dpdk_vhost_send. > > > > > > > > Here it is some extra debug info: > > > > > > > > ovs-vswithd.log: > > > > http://pastebin.com/2CUyjGED > > > > > > > > ovs-vsctl show > > > > Bridge "br0" > > > > Port "br0" Interface "br0" type: internal > > > > Port "vhost-user-2" Interface "vhost-user-2" type: > dpdkvhostuser > > > > Port "vhost-user-1" Interface "vhost-user-1" type: > dpdkvhostuser > > > > > > > > ovs-appctl dpctl/show > > > > netdev@ovs-netdev: > > > > lookups: hit:411 missed:1 lost:0 > > > > flows: 1 > > > > port 0: ovs-netdev (internal) > > > > port 1: vhost-user-1 (dpdkvhostuser: > configured_rx_queues=1, configured_tx_queues=1, requested_rx_queues=1, > requested_tx_queues=9) > > > > port 2: br0 (tap) > > > > port 3: vhost-user-2 (dpdkvhostuser: > configured_rx_queues=1, configured_tx_queues=1, requested_rx_queues=1, > requested_tx_queues=9) > > > > > > > > ovs-appctl dpif-netdev/pmd-rxq-show > > > > pmd thread numa_id 0 core_id 0: > > > > port: vhost-user-1 queue-id: 0 > > > > port: vhost-user-2 queue-id: 0 > > > > > > > > Thank you very much, > > > > > > > > Mauricio V, > > > > > > > > > > > _______________________________________________ > dev mailing list > dev@openvswitch.org <mailto:dev@openvswitch.org> > http://openvswitch.org/mailman/listinfo/dev > > _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
