Hi Jesse, Exactly as you said, the newest version works well, and the mpls label could be push and pop. Thanks for your answer.
Best, Yali -----邮件原件----- 发件人: Jesse Gross [mailto:je...@kernel.org] 发送时间: 2016年2月3日 7:24 收件人: zhangyali (D) 抄送: dev@openvswitch.org 主题: Re: [ovs-dev] [ovs discussion]MPLS tunnel protocol support in OVS On Mon, Feb 1, 2016 at 8:02 PM, zhangyali (D) <zhangyali...@huawei.com> wrote: > Hi all, > > I have noticed that OVS support multiple tunneling protocols, such as, GRE, > VXLAN, etc. I am not sure if the MPLS has been also supported now (could not > find it ...). Since the openflow protocol has support the corresponding > actions of MPLS, such as, push_mpls, pop_mpls. I have try to test it. > > The topology is h1-s1-s2-h2 > > root@ubuntu-14:~/test-ovs# ovs-vsctl show > 49c4a7af-3a27-4ef1-8dc3-f1f90d5c19ce > Bridge "s2" > Port "s2" > Interface "s2" > type: internal > Port "s2-eth1" > Interface "s2-eth1" > Port "s2-eth2" > Interface "s2-eth2" > Bridge "s1" > Port "s1-eth2" > Interface "s1-eth2" > Port "s1-eth1" > Interface "s1-eth1" > Port "s1" > Interface "s1" > type: internal > ovs_version: "2.0.1" > The ip address of h1 is 10.0.0.1/24, and the ip address of h2 is 10.0.0.2/24. > > The flow-table is as below. > root@ubuntu-14:~/test-ovs# ovs-ofctl dump-flows s1 NXST_FLOW reply > (xid=0x4): > cookie=0x0, duration=37.61s, table=0, n_packets=0, n_bytes=0, > idle_age=37, in_port=1 > actions=push_mpls:0x8847,load:0x1->OXM_OF_MPLS_LABEL[],output:2 > cookie=0x0, duration=15.517s, table=0, n_packets=0, n_bytes=0, > idle_age=15, in_port=2 actions=output:1 cookie=0x0, duration=52.027s, > table=0, n_packets=0, n_bytes=0, idle_age=52, priority=0 > actions=NORMAL root@ubuntu-14:~/test-ovs# ovs-ofctl dump-flows s2 NXST_FLOW > reply (xid=0x4): > cookie=0x0, duration=9.759s, table=0, n_packets=0, n_bytes=0, > idle_age=9, in_port=1 actions=output:2 cookie=0x0, duration=37.555s, > table=0, n_packets=0, n_bytes=0, idle_age=37, in_port=2 > actions=pop_mpls:0x0800,output:1 cookie=0x0, duration=57.217s, > table=0, n_packets=0, n_bytes=0, idle_age=57, priority=0 > actions=NORMAL > > But the ping package from h1 to h2 is unreachable. > > If I configure something wrong, or the ovs could not support mpls? Look > forwarding to your answer. Thanks. Are you handling ARP on the endpoints? OVS exposes Ethernet interfaces so this will send ARP in and mark it as IP on the way out. I would also use tcpdump on the various devices to make sure that the traffic matches what you would expect. Finally, the version of OVS you are using is relatively old and I think there were some important bug fixes to MPLS since then, so I would recommend upgrading to the newest version if you still can't get it to work. _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
