On Thu, Jan 21, 2016 at 04:11:50PM -0500, Russell Bryant wrote:
> Multiple logical ports on the same chassis that were connected to the
> same physical network via localnet ports were not able to send packets
> to each other. This was because ovn-controller created a single patch
> port between br-int and the physical network access bridge and used it
> for all localnet ports.
>
> The fix implemented here is to create a separate patch port for every
> logical port of type=localnet. An optimization is included where these
> ports are only created if the localnet port is on a logical switch with
> another logical port with an associated local VIF.
>
> A nice side effect of this fix is that the code in physical.c got a lot
> simpler, as localnet ports are now handled mostly like local VIFs.
>
> Fixes: c02819293d52 ("ovn: Add "localnet" logical port type.")
> Reported-by: Han Zhou <[email protected]>
> Reported-at: http://openvswitch.org/pipermail/dev/2016-January/064413.html
> Signed-off-by: Russell Bryant <[email protected]>
> Tested-by: Kyle Mestery <[email protected]
> Acked-By: Kyle Mestery <[email protected]>
> ---
>
>
> v2->v3:
> - tweak localnet port input flow handling as suggested by ben
Thank you.
Acked-by: Ben Pfaff <[email protected]>
_______________________________________________
dev mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/dev
