Hi Ben, We are using 2.4.0 , the problem is fixed now we had to do ./configure with the –disable-ssl option .
Thanks and regards, Rishi Raj On Thu, Oct 1, 2015 at 9:31 PM, Ben Pfaff <b...@nicira.com> wrote: > On Thu, Oct 01, 2015 at 06:09:28PM +0530, RishiRaj Maulick wrote: > > We are trying to cross-compile and run the ovs-vswitchd on a machine that > > runs on powerPC architecture. We have cross-compiled the code > successfully > > however we are hitting some issues :- > > > > 1) When we try to create the conf.db file from the schema - it fails to > > decode the JSON objects. > > 2) Then we started to run the ovsdb-server on a x86 machine and ran > > vswitchd on powerPC - used tcp to communicate between them . > > 3) tcpdump confirms that the vswitchd was able to connect to the > > ovsdb-server , it sent a "list_schemas" json request and the server > replied > > to that , and then it sent a "lock" request which also was successfully > > replied by the ovsdb-server. > > 4) At this stage we see that the vswitchd is sending a TCP reset towards > > the server - the reason is because it thinks that the "lock" method has > > failed - in bridge_run() the check for has_lock() fails. > > 5) Also we see that the logs of vswitchd are not coming properly - all we > > see are 0's . > > > > Open vSwitch 2.3.x should work OK on powerpc. It passes the testsuite > there: > https://buildd.debian.org/status/package.php?p=openvswitch > > You didn't say what version you're using. > _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
