Hello everyone, I am developing a new match option in the datapath. I implemented almost everything already, but I am missing something and I don't know what nor what is next step.
Adding the flow directly to the datapath gives the following error: ovs-dpctl: updating flow table (Invalid argument) The full "stack" sudo ovs-dpctl add-flow "ovs-system" "in_port(3),eth(src=00:00:00:00:ca:fe,dst=05:05:05:05:05:05),eth_type(0x0800),ipv4(src= 10.10.0.1/255.255.255.255,dst=10.10.0.2/255.255.255.255,proto=17/0xff,tos=0/0,ttl=64/0,frag=no/0xff),udp(src=2152/0,dst=2152/0xffff),new_match_option(11259375/0xffffffff)" "1" 2015-08-05T19:58:58Z|00001|dpif|WARN|system@ovs-system: failed to put[create] (Invalid argument) in_port(3),eth(src=00:00:00:00:ca:fe,dst=05:05:05:05:05:05),eth_type(0x0800),ipv4(src= 10.10.0.1/255.255.255.255,dst=10.10.0.2/255.255.255.255,proto=17/0xff,tos=0/0,ttl=64/0,frag=no/0xff ),udp(src=2152/0,dst=2152/0xffff),new_match_option(id=11259375/0xffffffff) ovs-dpctl: updating flow table (Invalid argument) Any thoughts, hints or comments are appreciated. Kind regards and keep developing! Raúl _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
