This test case is to test setting tunnel id by flow rule,
in userspace datapath.
e.g. actions=set_tunnel:3,output:[tunnel port]
test case: dnl Check VXLAN tunnel push set tunnel id by flow
@tests/tunnel-push-pop.at
---
tests/tunnel-push-pop.at | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/tests/tunnel-push-pop.at b/tests/tunnel-push-pop.at
index f1fac7f..6e1c0c1 100644
--- a/tests/tunnel-push-pop.at
+++ b/tests/tunnel-push-pop.at
@@ -7,7 +7,10 @@ AT_CHECK([ovs-vsctl add-br int-br -- set bridge int-br
datapath_type=dummy], [0]
AT_CHECK([ovs-vsctl add-port int-br t2 -- set Interface t2 type=vxlan \
options:remote_ip=1.1.2.92 options:key=123
ofport_request=2\
-- add-port int-br t1 -- set Interface t1 type=gre \
- options:remote_ip=1.1.2.92 options:key=456
ofport_request=3], [0])
+ options:remote_ip=1.1.2.92 options:key=456
ofport_request=3\
+ -- add-port int-br t3 -- set Interface t3 type=vxlan \
+ options:remote_ip=1.1.2.93 options:out_key=flow
ofport_request=4\
+ ], [0])
AT_CHECK([ovs-appctl dpif/show], [0], [dnl
dummy@ovs-dummy: hit:0 missed:0
@@ -18,6 +21,7 @@ dummy@ovs-dummy: hit:0 missed:0
int-br 65534/2: (dummy)
t1 3/3: (gre: key=456, remote_ip=1.1.2.92)
t2 2/4789: (vxlan: key=123, remote_ip=1.1.2.92)
+ t3 4/4789: (vxlan: out_key=flow, remote_ip=1.1.2.93)
])
AT_CHECK([ovs-appctl ovs/route/add 1.1.2.92/24 br0], [0], [OK
@@ -29,11 +33,13 @@ AT_CHECK([ovs-ofctl add-flow br0 action=normal])
dnl Check ARP Snoop
AT_CHECK([ovs-appctl netdev-dummy/receive br0
'recirc_id(0),in_port(100),eth(src=f8:bc:12:44:34:b6,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=1.1.2.92,tip=1.1.2.88,op=1,sha=f8:bc:12:44:34:b6,tha=00:00:00:00:00:00)'])
+AT_CHECK([ovs-appctl netdev-dummy/receive br0
'recirc_id(0),in_port(100),eth(src=f8:bc:12:44:34:b7,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=1.1.2.93,tip=1.1.2.88,op=1,sha=f8:bc:12:44:34:b7,tha=00:00:00:00:00:00)'])
AT_CHECK([ovs-appctl tnl/arp/show], [0], [dnl
IP MAC Bridge
=============================================
1.1.2.92 f8:bc:12:44:34:b6 br0
+1.1.2.93 f8:bc:12:44:34:b7 br0
])
dnl Check VXLAN tunnel pop
@@ -55,6 +61,13 @@ AT_CHECK([tail -1 stdout], [0],
[Datapath actions:
tnl_push(tnl_port(4789),header(size=50,type=4,eth(dst=f8:bc:12:44:34:b6,src=aa:55:aa:55:00:00,dl_type=0x0800),ipv4(src=1.1.2.88,dst=1.1.2.92,proto=17,tos=0,ttl=64,frag=0x40),udp(src=0,dst=4789),vxlan(flags=0x8000000,vni=0x7b00)),out_port(100))
])
+dnl Check VXLAN tunnel push set tunnel id by flow
+AT_CHECK([ovs-ofctl add-flow int-br "actions=set_tunnel:124,4"])
+AT_CHECK([ovs-appctl ofproto/trace ovs-dummy
'in_port(2),eth_type(0x0800),ipv4(src=1.1.3.88,dst=1.1.3.112,proto=47,tos=0,ttl=64,frag=no)'],
[0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions:
tnl_push(tnl_port(4789),header(size=50,type=4,eth(dst=f8:bc:12:44:34:b7,src=aa:55:aa:55:00:00,dl_type=0x0800),ipv4(src=1.1.2.88,dst=1.1.2.93,proto=17,tos=0,ttl=64,frag=0x40),udp(src=0,dst=4789),vxlan(flags=0x8000000,vni=0x7c00)),out_port(100))
+])
+
dnl Check GRE tunnel push
AT_CHECK([ovs-ofctl add-flow int-br action=3])
AT_CHECK([ovs-appctl ofproto/trace ovs-dummy
'in_port(2),eth_type(0x0800),ipv4(src=1.1.3.88,dst=1.1.3.112,proto=47,tos=0,ttl=64,frag=no)'],
[0], [stdout])
--
1.9.5.msysgit.0
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev
