On Tue, Sep 2, 2014 at 1:58 PM, <[email protected]> wrote:
> From: Ariel Tubaltsev <[email protected]>
>
> This commit adds default values for some BFD configuration keys
> (bfd_config_local:bfd_dst_mac and bfd_params:enable). It also adds new
> BFD status keys (bfd_enabled and bfd_info).
>
> Signed-off-by: Ariel Tubaltsev <[email protected]>
> Signed-off-by: Bruce Davie <[email protected]>
Applied, thanks.
> ---
> vtep/vtep.xml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/vtep/vtep.xml b/vtep/vtep.xml
> index 4393a16..cf6bf74 100644
> --- a/vtep/vtep.xml
> +++ b/vtep/vtep.xml
> @@ -360,6 +360,7 @@
> Set to an Ethernet address in the form
>
> <var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>
> to set the MAC expected as destination for received BFD packets.
> + The default is <code>00:23:20:00:00:01</code>.
> </column>
>
> <column name="bfd_config_local" key="bfd_dst_ip">
> @@ -398,6 +399,7 @@
>
> <column name="bfd_params" key="enable" type='{"type": "boolean"}'>
> True to enable BFD on this tunnel.
> + The default is False.
> </column>
>
> <column name="bfd_params" key="min_rx"
> @@ -459,6 +461,15 @@
> HSC clears all key-value pairs from <ref column="bfd_status"/>.
> </p>
>
> + <column name="bfd_status" key="enabled"
> + type='{"type": "boolean"}'>
> + Set to true if the BFD session has been successfully
> + enabled. Set to false if the VTEP cannot support BFD or has
> + insufficient resources to enable BFD on this tunnel. The NVC
> + will disable the BFD monitoring on the other side of the tunnel
> + once this value is set to false.
> + </column>
> +
> <column name="bfd_status" key="state"
> type='{"type": "string",
> "enum": ["set", ["admin_down", "down", "init", "up"]]}'>
> @@ -490,6 +501,11 @@
> remote endpoint's BFD session thinks is wrong. The error messages
> are defined in section 4.1 of [RFC 5880].
> </column>
> +
> + <column name="bfd_status" key="info">
> + A short message providing further information about the BFD status
> + (possibly including reasons why BFD could not be enabled).
> + </column>
> </group>
> </group>
> </table>
> --
> 1.7.9.5
>
> _______________________________________________
> dev mailing list
> [email protected]
> http://openvswitch.org/mailman/listinfo/dev
_______________________________________________
dev mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/dev
