commit 8661af798(timeval: Provide a variation for time/warp command)
provided a variation of time/warp command to prevent multiple
invocations of time/warp. That commit changed only the users in bfd.at
and cfm.at as they used it the most. Since we haven't had any negative
confequences because of the change, add the remaining users.
Signed-off-by: Gurucharan Shetty <gshe...@nicira.com>
---
tests/lacp.at | 12 ++++--------
tests/learn.at | 4 +---
tests/ofproto-dpif.at | 21 +++++++--------------
tests/ovs-vswitchd.at | 10 +++++-----
tests/ovsdb-server.at | 2 +-
5 files changed, 18 insertions(+), 31 deletions(-)
diff --git a/tests/lacp.at b/tests/lacp.at
index 0db2077..0e3fca6 100644
--- a/tests/lacp.at
+++ b/tests/lacp.at
@@ -12,9 +12,7 @@ OVS_VSWITCHD_START([\
set Interface p1 type=dummy ])
ovs-appctl time/stop
-ovs-appctl time/warp 100
-ovs-appctl time/warp 100
-ovs-appctl time/warp 100
+ovs-appctl time/warp 300 100
AT_CHECK([ovs-appctl lacp/show], [0], [dnl
---- p1 ----
@@ -64,9 +62,7 @@ OVS_VSWITCHD_START([dnl
other_config:lacp-aggregation-key=3333 ])
ovs-appctl time/stop
-ovs-appctl time/warp 100
-ovs-appctl time/warp 100
-ovs-appctl time/warp 100
+ovs-appctl time/warp 300 100
AT_CHECK([ovs-appctl lacp/show], [0], [stdout])
AT_CHECK([sed -e 's/aggregation key:.*/aggregation key: <omitted>/' < stdout],
[0], [dnl
@@ -320,7 +316,7 @@ AT_CHECK([ovs-vsctl \
-- add-port br0 null0 -- set int null0 type=patch options:peer=p2 -- set int
p2 options:peer=null0 \
-- add-port br1 null1 -- set int null1 type=patch options:peer=p0 -- set int
p0 options:peer=null1])
-for i in `seq 0 40`; do ovs-appctl time/warp 100; done
+ovs-appctl time/warp 4100 100
AT_CHECK(
[ovs-appctl lacp/show bond0
ovs-appctl lacp/show bond1
@@ -448,7 +444,7 @@ slave p3: enabled
# Wait 4 more simulated seconds. The LACP state should become
# "defaulted" for p0 and p2.
-for i in `seq 0 40`; do ovs-appctl time/warp 100; done
+ovs-appctl time/warp 4100 100
AT_CHECK(
[ovs-appctl lacp/show bond0
ovs-appctl lacp/show bond1
diff --git a/tests/learn.at b/tests/learn.at
index 2ca58fc..322ab84 100644
--- a/tests/learn.at
+++ b/tests/learn.at
@@ -219,9 +219,7 @@ NXST_FLOW reply:
done
# Make sure that 15 seconds without refreshing makes the flow time out.
-ovs-appctl time/warp 5000
-ovs-appctl time/warp 5000
-ovs-appctl time/warp 5000
+ovs-appctl time/warp 15000 5000
sleep 1
AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
table=1, priority=0 actions=FLOOD
diff --git a/tests/ofproto-dpif.at b/tests/ofproto-dpif.at
index d05b4ef..01db3f1 100644
--- a/tests/ofproto-dpif.at
+++ b/tests/ofproto-dpif.at
@@ -40,8 +40,7 @@ ovs-appctl netdev-dummy/set-admin-state p1 down
ovs-appctl time/warp 100
AT_CHECK([ovs-appctl netdev-dummy/receive p7
'in_port(7),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0d),eth_type(0x0800),ipv4(src=10.0.0.5,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
AT_CHECK([ovs-appctl netdev-dummy/receive p7
'in_port(7),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0e),eth_type(0x0800),ipv4(src=10.0.0.6,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
-ovs-appctl time/warp 100
-ovs-appctl time/warp 100
+ovs-appctl time/warp 200 100
sleep 1
AT_CHECK([cat ovs-vswitchd.log | grep 'in_port([[348]])' | FILTER_FLOW_INSTALL
| STRIP_XOUT], [0], [dnl
skb_priority(0),skb_mark(0/0),recirc_id(0),dp_hash(0/0),in_port(3),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2/0.0.0.0,dst=10.0.0.1/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff),icmp(type=8/0,code=0/0),
actions: <del>
@@ -137,9 +136,7 @@ for i in `seq 0 255` ;
AT_CHECK([ovs-appctl netdev-dummy/receive p7 $pkt])
done
)
-ovs-appctl time/warp 100
-ovs-appctl time/warp 100
-ovs-appctl time/warp 100
+ovs-appctl time/warp 300 100
AT_CHECK([ovs-appctl dpif/dump-flows br0 |grep tcp > br0_flows.txt])
AT_CHECK([ovs-appctl dpif/dump-flows br1 |grep tcp > br1_flows.txt])
# Make sure there is resonable distribution to all three ports.
@@ -3967,9 +3964,7 @@ m4_define([CHECK_SFLOW_SAMPLING_PACKET],
dnl sleep long enough to get more than one counter sample
dnl from each datasource so we can check sequence numbers
- for i in `seq 1 30`; do
- ovs-appctl time/warp 100
- done
+ ovs-appctl time/warp 3000 100
OVS_VSWITCHD_STOP
ovs-appctl -t test-sflow exit
@@ -4456,9 +4451,7 @@ get_ages duration3 hard3 idle3
# occasionally.
ovs-appctl time/warp 10000
ovs-appctl netdev-dummy/receive br0
'in_port(0),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=80,dst=1234)'
-ovs-appctl time/warp 1000
-ovs-appctl time/warp 1000
-ovs-appctl time/warp 1000
+ovs-appctl time/warp 3000 1000
sleep 1
get_ages duration4 hard4 idle4
@@ -5316,7 +5309,7 @@ OVS_VSWITCHD_START([add-br br1 -- set bridge br1
datapath-type=dummy -- \
ovs-appctl time/stop
# advance the clock to stablize everything.
-for i in `seq 0 49`; do ovs-appctl time/warp 100; done
+ovs-appctl time/warp 5000 100
# cfm/show should show 'recv' fault.
AT_CHECK([ovs-appctl cfm/show | sed -n '/^.*fault:.*/p'], [0], [dnl
fault: recv
@@ -5339,7 +5332,7 @@ AT_CHECK([ovs-appctl bond/show | sed -n
'/^.*may_enable:.*/p'], [0], [dnl
# now disable the bfd on p1.
AT_CHECK([ovs-vsctl set Interface p1 bfd:enable=false])
# advance the clock to stablize everything.
-for i in `seq 0 49`; do ovs-appctl time/warp 100; done
+ovs-appctl time/warp 5000 100
# cfm/show should show 'recv' fault.
AT_CHECK([ovs-appctl cfm/show | sed -n '/^.*fault:.*/p'], [0], [dnl
fault: recv
@@ -5359,7 +5352,7 @@ AT_CHECK([ovs-appctl bond/show br0bond | sed -n
'/^.*may_enable:.*/p'], [0], [dn
AT_CHECK([ovs-vsctl set Interface p1 bfd:enable=true])
AT_CHECK([ovs-vsctl set Interface p0 bfd:enable=false])
# advance the clock to stablize everything.
-for i in `seq 0 49`; do ovs-appctl time/warp 100; done
+ovs-appctl time/warp 5000 100
# cfm/show should show 'recv' fault.
AT_CHECK([ovs-appctl cfm/show | sed -n '/^.*fault:.*/p'], [0], [dnl
fault: recv
diff --git a/tests/ovs-vswitchd.at b/tests/ovs-vswitchd.at
index cbe0ee9..fe3dd8e 100644
--- a/tests/ovs-vswitchd.at
+++ b/tests/ovs-vswitchd.at
@@ -40,28 +40,28 @@ OVS_VSWITCHD_START([add-port br0 p1 -- set int p1
type=internal])
ovs-appctl time/stop
dnl at the beginning, the update of rx_packets should happen every 5 seconds.
-for i in `seq 0 10`; do ovs-appctl time/warp 1000; done
+ovs-appctl time/warp 11000 1000
OVS_VSCTL_CHECK_RX_PKT([p1], [0])
AT_CHECK([ovs-appctl netdev-dummy/receive p1
'eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
-for i in `seq 0 10`; do ovs-appctl time/warp 1000; done
+ovs-appctl time/warp 11000 1000
OVS_VSCTL_CHECK_RX_PKT([p1], [1])
dnl set the stats update interval to 100K ms, the following 'recv' should not
be updated.
AT_CHECK([ovs-vsctl set O . other_config:stats-update-interval=100000])
-for i in `seq 0 50`; do ovs-appctl time/warp 1000; done
+ovs-appctl time/warp 51000 1000
for i in `seq 1 5`; do
AT_CHECK([ovs-appctl netdev-dummy/receive p1
'eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
done
OVS_VSCTL_CHECK_RX_PKT([p1], [1])
dnl advance the clock by 100K ms, the previous 'recv' should be updated.
-for i in `seq 0 99`; do ovs-appctl time/warp 1000; done
+ovs-appctl time/warp 100000 1000
OVS_VSCTL_CHECK_RX_PKT([p1], [6])
dnl now remove the configuration. 'recv' one packet. there should be an
update after 5000 ms.
AT_CHECK([ovs-vsctl clear O . other_config])
AT_CHECK([ovs-appctl netdev-dummy/receive p1
'eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
-for i in `seq 0 10`; do ovs-appctl time/warp 1000; done
+ovs-appctl time/warp 11000 1000
OVS_VSCTL_CHECK_RX_PKT([p1], [7])
OVS_VSWITCHD_STOP
diff --git a/tests/ovsdb-server.at b/tests/ovsdb-server.at
index b30a714..390651b 100644
--- a/tests/ovsdb-server.at
+++ b/tests/ovsdb-server.at
@@ -359,7 +359,7 @@ AT_CHECK(
"row": {"target": "punix:socket2"}}]']], [0], [ignore], [ignore])
ON_EXIT([kill `cat ovsdb-server.pid`])
AT_CHECK([ovsdb-server --enable-dummy --detach --no-chdir --pidfile
--remote=db:mydb,Root,managers --remote=db:mydb,Root,manager_options --log-file
db], [0], [ignore], [ignore])
-for i in 1 2 3 4 5 6; do ovs-appctl -t ovsdb-server time/warp 1000; done
+ovs-appctl -t ovsdb-server time/warp 6000 1000
AT_CHECK(
[[ovsdb-client transact unix:socket1 \
'["mydb",
--
1.7.9.5
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev
