Hey Ben, Yeah, this is introduced by my changes. I'm working on a fix.
Alex Wang, Thx, On Mon, Apr 21, 2014 at 4:48 PM, Ben Pfaff <b...@nicira.com> wrote: > Yes, I'm seeing these too on current master. I bisected it to the > following commit: > > commit 9a159f748866136a126474137604b2b020bd3574 > Author: Alex Wang <al...@nicira.com> > Date: Wed Feb 26 23:03:24 2014 -0800 > > ofproto-dpif-upcall: Remove the dispatcher thread. > > With the foundation laid in previous commits, this commit > removes the 'dispatcher' thread by allowing 'handler' > threads to read upcalls directly from dpif. > > This commit significantly simplifies the flow miss handling > code and brings slight improvement to flow setup rate. > > Signed-off-by: Alex Wang <al...@nicira.com> > Acked-by: Ethan Jackson <et...@nicira.com> > > Alex, why do we get these new ERANGE errors? Can we fix them? > > On Sun, Apr 20, 2014 at 02:28:08AM +0100, Andr? Martins wrote: > > Hello, when I run this on console 1: > > sudo ovs-vswitchd --pidfile > > and this on console 2: > > sudo mn --switch ovsk --controller ref --topo single,3 > > > > I got this on console 1: > > > 2014-04-20T01:24:58Z|00001|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock: > > connecting... > > > 2014-04-20T01:24:58Z|00002|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock: > > connected > > 2014-04-20T01:24:58Z|00003|bridge|INFO|ovs-vswitchd (Open vSwitch) 2.1.90 > > 2014-04-20T01:25:01Z|00004|dpif|WARN|system@ovs-system: failed to > > put[create][modify] (Invalid argument) > skb_priority(0),skb_mark(0),recirc_id(0x1),dp_hash(0x1),in_port(0),eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00) > > 2014-04-20T01:25:01Z|00005|ofproto_dpif|INFO|system@ovs-system: > > Datapath does not support recirculation > > 2014-04-20T01:25:01Z|00006|dpif|WARN|system@ovs-system: failed to > > put[create][modify] (Invalid argument) > skb_priority(0),skb_mark(0),in_port(0),eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00),eth_type(0x8847),mpls(label=0,tc=0,ttl=0,bos=1) > > 2014-04-20T01:25:01Z|00007|ofproto_dpif|INFO|system@ovs-system: MPLS > > label stack length probed as 0 > > 2014-04-20T01:25:01Z|00008|bridge|INFO|bridge s1: added interface s1 > > on port 65534 > > 2014-04-20T01:25:01Z|00009|bridge|INFO|bridge s1: using datapath ID > > 00004a335765d64b > > 2014-04-20T01:25:01Z|00010|connmgr|INFO|s1: added service controller > > "punix:/usr/local/var/run/openvswitch/s1.mgmt" > > 2014-04-20T01:25:01Z|00011|dpif_linux|WARN|system@ovs-system: failed > > to set upcall pid on port: Numerical result out of range > > 2014-04-20T01:25:01Z|00012|dpif_linux|WARN|system@ovs-system: failed > > to set upcall pid on port: Numerical result out of range > > 2014-04-20T01:25:01Z|00013|dpif|WARN|system@ovs-system: handlers_set > > failed (Numerical result out of range) > > 2014-04-20T01:25:01Z|00014|ofproto_dpif_upcall|ERR|failed to > > configure handlers in dpif system@ovs-system: Numerical result out > > of range > > 2014-04-20T01:25:01Z|00015|bridge|INFO|bridge s1: using datapath ID > > 0000000000000001 > > 2014-04-20T01:25:01Z|00016|dpif_linux|WARN|system@ovs-system: failed > > to set upcall pid on port: Numerical result out of range > > 2014-04-20T01:25:01Z|00017|dpif_linux|WARN|system@ovs-system: failed > > to set upcall pid on port: Numerical result out of range > > 2014-04-20T01:25:01Z|00018|dpif|WARN|system@ovs-system: handlers_set > > failed (Numerical result out of range) > > 2014-04-20T01:25:01Z|00019|ofproto_dpif_upcall|ERR|failed to > > configure handlers in dpif system@ovs-system: Numerical result out > > of range > > 2014-04-20T01:25:01Z|00020|bridge|INFO|bridge s1: added interface > > s1-eth1 on port 1 > > 2014-04-20T01:25:01Z|00021|bridge|INFO|bridge s1: added interface > > s1-eth2 on port 2 > > 2014-04-20T01:25:01Z|00022|bridge|INFO|bridge s1: added interface > > s1-eth3 on port 3 > > 2014-04-20T01:25:01Z|00023|connmgr|INFO|s1: added service controller > > "ptcp:6634" > > 2014-04-20T01:25:01Z|00024|connmgr|INFO|s1: added primary controller > > "tcp:127.0.0.1:6633" > > 2014-04-20T01:25:01Z|00025|rconn|INFO|s1<->tcp:127.0.0.1:6633: > connecting... > > 2014-04-20T01:25:01Z|00026|dpif_linux|WARN|system@ovs-system: failed > > to set upcall pid on port: Numerical result out of range > > > > <=======> > > This only happens with version 2.1.90, the version 2.1.0 doesn't > > have any problems. > > Thanks, > > Andr? Martins > > > > _______________________________________________ > > discuss mailing list > > disc...@openvswitch.org > > http://openvswitch.org/mailman/listinfo/discuss >
_______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
