On Thu, Mar 13, 2014 at 03:52:56PM +0900, Simon Horman wrote: > OpenFlow 1.1 and 1.2 specify that if a table-miss occurs then the default > behaviour is to forward the packet the controller using a packet-in > message. And until this patch this is the default behaviour that Open > vSwitch uses for all OpenFlow versions. > > OpenFlow1.3+ specifies that if a table-miss occurs then the default > behaviour is simply to drop the packet. This patch implements this > behaviour using the following logic: > > If a table-miss occurs and the table-miss behaviour for the table > has not been set using a table_mod (in which case it is no longer > the default setting) then: > > * Installing a facet in the datapath with a drop action in the > if there are no pre-OF1.3 controllers connected which would receive > an packet_in message. > > Note that this covers both the case where there are only OF1.3 > controllers and the case where there are no controllers at all. > > * Otherwise sent a packet_in message to all pre-OF1.3 controllers. > > This covers both the case where there are only pre-OF1.3 > controllers and there are both pre-OF1.3 and OF1.3+ controllers. > > Signed-off-by: Simon Horman <ho...@verge.net.au>
Due to the changes I made to your patch that implement the "table mod" message, this one no longer applies and needs a rebase. Would you mind doing that? Thanks, Ben. _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
