This commit prevents cfm from raising 'interval' fault when demand
mode is only enabled on one end of link.
Signed-off-by: Alex Wang <al...@nicira.com>
---
v1 -> v2:
- simplify the code.
---
lib/cfm.c | 12 +++++++----
tests/automake.mk | 1 +
tests/cfm.at | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/testsuite.at | 1 +
vswitchd/vswitch.xml | 5 +++--
5 files changed, 70 insertions(+), 6 deletions(-)
create mode 100644 tests/cfm.at
diff --git a/lib/cfm.c b/lib/cfm.c
index 4a46c05..b496d81 100644
--- a/lib/cfm.c
+++ b/lib/cfm.c
@@ -255,9 +255,14 @@ cfm_fault_interval(struct cfm *cfm) OVS_REQUIRES(mutex)
* as a fault (likely due to a configuration error). Thus we can check all
* MPs at once making this quite a bit simpler.
*
- * According to the specification we should check when (ccm_interval_ms *
- * 3.5)ms have passed. */
- return (cfm->ccm_interval_ms * 7) / 2;
+ * When cfm is not in demand mode, we check when (ccm_interval_ms * 3.5) ms
+ * have passed.
+ * When cfm is in demand mode, we check when
+ * (MAX(ccm_interval_ms, 500) * 3.5) ms have passed. This is to ensure
+ * that ovs-vswitchd has enough time to pull statistics from the datapath.
*/
+
+ return (MAX(cfm->ccm_interval_ms, cfm->demand ? 500 : cfm->ccm_interval_ms)
+ * 7) / 2;
}
static uint8_t
@@ -611,7 +616,6 @@ cfm_configure(struct cfm *cfm, const struct cfm_settings *s)
}
if (s->extended && s->demand) {
- interval_ms = MAX(interval_ms, 500);
if (!cfm->demand) {
cfm->demand = true;
cfm->rx_packets = cfm_rx_packets(cfm);
diff --git a/tests/automake.mk b/tests/automake.mk
index 60d3640..8f51a65 100644
--- a/tests/automake.mk
+++ b/tests/automake.mk
@@ -22,6 +22,7 @@ TESTSUITE_AT = \
tests/odp.at \
tests/multipath.at \
tests/bfd.at \
+ tests/cfm.at \
tests/lacp.at \
tests/learn.at \
tests/vconn.at \
diff --git a/tests/cfm.at b/tests/cfm.at
new file mode 100644
index 0000000..638e03f
--- /dev/null
+++ b/tests/cfm.at
@@ -0,0 +1,57 @@
+AT_BANNER([cfm])
+
+m4_define([CFM_CHECK_EXTENDED], [
+AT_CHECK([ovs-appctl cfm/show $1 | sed -e '/next CCM tx:/d' | sed -e '/next
fault check:/d' | sed -e '/recv since check:/d'],[0],
+[dnl
+---- $1 ----
+MPID $2: extended
+ average health: $3
+ opstate: $4
+ remote_opstate: $5
+ interval: $6
+Remote MPID $7
+ opstate: $8
+])
+])
+
+# test cfm under demand mode.
+AT_SETUP([cfm - demand mode])
+#Create 2 bridges connected by patch ports and enable BFD
+OVS_VSWITCHD_START([add-br br1 -- \
+ set bridge br1 datapath-type=dummy \
+ other-config:hwaddr=aa:55:aa:56:00:00 -- \
+ add-port br1 p1 -- set Interface p1 type=patch \
+ options:peer=p0 -- \
+ add-port br0 p0 -- set Interface p0 type=patch \
+ options:peer=p1 -- \
+ set Interface p0 cfm_mpid=1 other_config:cfm_interval=300
other_config:cfm_extended=true -- \
+ set Interface p1 cfm_mpid=2 other_config:cfm_interval=300
other_config:cfm_extended=true ])
+
+ovs-appctl time/stop
+# wait for a while to stablize cfm.
+for i in `seq 0 100`; do ovs-appctl time/warp 100; done
+CFM_CHECK_EXTENDED([p0], [1], [100], [up], [up], [300ms], [2], [up])
+CFM_CHECK_EXTENDED([p1], [2], [100], [up], [up], [300ms], [1], [up])
+
+# turn on demand mode on one end.
+AT_CHECK([ovs-vsctl set interface p0 other_config:cfm_demand=true])
+
+# cfm should never go down.
+for i in `seq 0 100`
+do
+ ovs-appctl time/warp 100
+ CFM_CHECK_EXTENDED([p0], [1], [100], [up], [up], [300ms], [2], [up])
+ CFM_CHECK_EXTENDED([p1], [2], [100], [up], [up], [300ms], [1], [up])
+done
+
+# turn on demand mode on the other end.
+AT_CHECK([ovs-vsctl set interface p1 other_config:cfm_demand=true])
+for i in `seq 0 100`
+do
+ ovs-appctl time/warp 100
+ CFM_CHECK_EXTENDED([p0], [1], [100], [up], [up], [300ms], [2], [up])
+ CFM_CHECK_EXTENDED([p1], [2], [100], [up], [up], [300ms], [1], [up])
+done
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
diff --git a/tests/testsuite.at b/tests/testsuite.at
index 43efc09..9e16f94 100644
--- a/tests/testsuite.at
+++ b/tests/testsuite.at
@@ -68,6 +68,7 @@ m4_include([tests/ovsdb-macros.at])
m4_include([tests/ofproto-macros.at])
m4_include([tests/bfd.at])
+m4_include([tests/cfm.at])
m4_include([tests/lacp.at])
m4_include([tests/library.at])
m4_include([tests/heap.at])
diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index 4b42ec7..5fd5b3b 100644
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -2142,8 +2142,9 @@
<ul>
<li>
To ensure that ovs-vswitchd has enough time to pull statistics
- from the datapath, the minimum
- <ref column="other_config" key="cfm_interval"/> is 500ms.
+ from the datapath, the fault detection interval is set to
+ 3.5 * MAX(<ref column="other_config" key="cfm_interval"/>, 500)
+ ms.
</li>
<li>
--
1.7.9.5
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev
