On Mon, Sep 09, 2013 at 04:20:00PM +0900, Simon Horman wrote: > Hi, > > This series implements MPLS actions and matches based on work by > Ravi K, Leo Alterman, Yamahata-san and Joe Stringer. > > This series provides two changes > > * Provide user-space support for the VLAN/MPLS tag insertion order > up to and including OpenFlow 1.2, and the different ordering > specified from OpenFlow 1.3. In a nutshell the datapath always > uses the OpenFlow 1.3 ordering, which is to always insert tags > immediately after the L2 header, regardless of the presence of other > tags. And ovs-vswtichd provides compatibility for the behaviour up > to OpenFlow 1.2, which is that MPLS tags should follow VLAN tags > if present. > > * Adding basic MPLS action and match support to the kernel datapath > > > Differences between v2.39 and v2.38: > > * Rebase for removal of vlan, checksum and skb->mark compat code > - This includes adding adding a new patch, > "[PATCH v2.39 6/7] datapath: Break out deacceleration portion of > vlan_push" to allow re-use of some existing code. > > > Differences between v2.38 and v2.37: > > * Rebase for SCTP support > * Refactor validate_tp_port() to iterate over eth_types rather > than open-coding the loop. With the addition of SCTP this logic > is now used three times. > > > Differences between v2.37 and v2.36: > > * Rebase > > > Differences between v2.36 and v2.35: > > * Rebase > > * Do not add set_ethertype() to datapath/actions.c. > As this patch has evolved this function had devolved into > to sets of functionality wrapped into a single function with > only one line of common code. Refactor things to simply > open-code setting the ether type in the two locations where > set_ethertype() was previously used. The aim here is to improve > readability. > > * Update setting skb->ethertype after mpls push and pop. > - In the case of push_mpls it should be set unconditionally > as in v2.35 the behaviour of this function to always push > an MPLS LSE before any VLAN tags. > - In the case of mpls_pop eth_p_mpls(skb->protocol) is a better > test than skb->protocol != htons(ETH_P_8021Q) as it will give the > correct behaviour in the presence of other VLAN ethernet types, > for example 0x88a8 which is used by 802.1ad. Moreover, it seems > correct to update the ethernet type if it was previously set > according to the top-most MPLS LSE. > > * Deaccelerate VLANs when pushing MPLS tags the > - Since v2.35 MPLS push will insert an MPLS LSE before any VLAN tags. > This means that if an accelerated tag is present it should be > deaccelerated to ensure it ends up in the correct position. > > * Update skb->mac_len in push_mpls() so that it will be correct > when used by a subsequent call to pop_mpls(). > > As things stand I do not believe this is strictly necessary as > ovs-vswitchd will not send a pop MPLS action after a push MPLS action. > However, I have added this in order to code more defensively as I believe > that if such a sequence did occur it would be rather unobvious why > it didn't work. > > * Do not add skb_cow_head() call in push_mpls(). > It is unnecessary as there is a make_writable() call. > This change was also made in v2.30 but some how the > code regressed between then and v2.35. > > > Differences between v2.35 and v2.34: > > * Add support for the tag ordering specified up until OpenFlow 1.2 and > the ordering specified from OpenFlow 1.3. > > * Correct error in datapath patch's handling of GSO in the presence > of MPLS and absence of VLANs.
I forgot to update the trailing portion of this cover letter. It should read as follows: Patch overview: * The first 5 patches add support for different tag ordering to user-space. * The 6th patch breaks out kernel datapath some code to allow it to be re-used by the last patch. * The last patch is a revised version of the patch to add MPLS support to the kernel datapath. To aid review this series is available in git at: git://github.com/horms/openvswitch.git devel/mpls-v2.39 Patch list and overall diffstat: Joe Stringer (5): odp: Only pass vlan_tci to commit_vlan_action() odp: Allow VLAN actions after MPLS actions ofp-actions: Add OFPUTIL_OFPAT13_PUSH_MPLS ofp-actions: Add separate OpenFlow 1.3 action parser lib: Push MPLS tags in the OpenFlow 1.3 ordering Simon Horman (2): datapath: Break out deacceleration portion of vlan_push datapath: Add basic MPLS support to kernel datapath/Modules.mk | 1 + datapath/actions.c | 154 +++++++- datapath/datapath.c | 259 ++++++++++++-- datapath/datapath.h | 9 + datapath/flow.c | 58 ++- datapath/flow.h | 17 +- datapath/linux/compat/gso.c | 50 ++- datapath/linux/compat/gso.h | 39 +++ datapath/linux/compat/include/linux/netdevice.h | 12 - datapath/linux/compat/netdevice.c | 28 -- datapath/mpls.h | 15 + datapath/vport-lisp.c | 1 + datapath/vport-netdev.c | 47 ++- include/linux/openvswitch.h | 7 +- lib/flow.c | 2 +- lib/odp-util.c | 22 +- lib/odp-util.h | 4 +- lib/ofp-actions.c | 68 +++- lib/ofp-parse.c | 1 + lib/ofp-util.c | 3 + lib/ofp-util.h | 1 + lib/packets.c | 10 +- lib/packets.h | 2 +- ofproto/ofproto-dpif-xlate.c | 103 ++++-- ofproto/ofproto-dpif-xlate.h | 5 + tests/ofproto-dpif.at | 446 ++++++++++++++++++++++++ 26 files changed, 1225 insertions(+), 139 deletions(-) create mode 100644 datapath/mpls.h -- 1.8.4 _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev