Looks good. --Justin
On Jun 29, 2012, at 10:40 PM, Ben Pfaff wrote: > Signed-off-by: Ben Pfaff <b...@nicira.com> > --- > utilities/ovs-ofctl.8.in | 6 +++--- > 1 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in > index 9c4ea0c..3ca217b 100644 > --- a/utilities/ovs-ofctl.8.in > +++ b/utilities/ovs-ofctl.8.in > @@ -276,7 +276,7 @@ If a switch has no controller configured, or if > the configured controller is disconnected, no traffic is sent, so > monitoring will not show any traffic. > . > -.IP "\fBmonitor \fIswitch\fR [\fImiss-len\fR] [\fIinvalid_ttl\fR]" > +.IP "\fBmonitor \fIswitch\fR [\fImiss-len\fR] [\fBinvalid_ttl\fR]" > Connects to \fIswitch\fR and prints to the console all OpenFlow > messages received. Usually, \fIswitch\fR should specify the name of a > bridge in the \fBovs\-vswitchd\fR database. > @@ -292,8 +292,8 @@ specified, very little traffic will ordinarily be > printed.) > .IP > If \fBinvalid_ttl\fR is passed, \fBovs\-ofctl\fR sends an OpenFlow ``set > configuration'' message at connection setup time that requests > -\fIINVALID_TTL_TO_CONTROLLER\fR, so that \fBovs\-ofctl monitor\fR can > -receive ``packets-in'' messages when TTL reaches zero on \fBdec_ttl\fR > action. > +\fBINVALID_TTL_TO_CONTROLLER\fR, so that \fBovs\-ofctl monitor\fR can > +receive ``packet-in'' messages when TTL reaches zero on \fBdec_ttl\fR action. > .IP > > This command may be useful for debugging switch or controller > -- > 1.7.2.5 > > _______________________________________________ > dev mailing list > dev@openvswitch.org > http://openvswitch.org/mailman/listinfo/dev _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
