Hi,
This series comprises a fresh batch of proposed changes to introduce
flow-based tunnelling.
At the heart of these changes is the following structure, which
is attached as a pointer to skb->cb.
struct ovs_key_ipv4_tunnel {
__be64 tun_id;
__u32 tun_flags;
__be32 ipv4_src;
__be32 ipv4_dst;
__u8 ipv4_tos;
__u8 ipv4_ttl;
__u8 tun_hdr_len;
__u8 pad;
};
This series does not introduce use of in-tree kernel tunneling code
by Open vSwitch. However, it is intended as preliminary work
for that goal and I believe attaching a structure similar
to the one above to to skb->cb could be mechanism to achieve that.
I have CCed netdev for any comment on that.
Some details of the implementatoin follow, they are not
particularly related to the use of in-tree kernel tunneling code.
Overview:
In general the appraoch that I have taken in user-space is to split
tunneling into realdevs and tundevs. Tunnel realdevs are devices that look
to users like the existing port-based tunnelling implementation. Tunnel
tundevs exist in the datapath and are where tx and rx occur. Tunnel
tundevs have very little configuration and are unable to opperate without
flow information that describes at least the remote IP.
Major Changes:
* Add an implementation of MSS clamping in user-space
* Fix sending of of ICMP for PMTU discovery
Limiations:
* In this series, realdevs exist in the kernel although I believe
it should not be necessary for them to do so. The reason that they are
there is to limit the changes that are needed to the user-space netdev
code and to allow review of the series before making those changes.
* The header cache has been removed, but some reminants of the
API remain. In particualr the tunnel header is still created and updated,
even thogh both occur for each transmit. It may make sense to
recombine those calls into a single call if the header cache is
to be permantently removed.
* Multicast could be implemented in user-space byt currently isn't.
This means that muilticast remote IP for tunneling is broken.
* I have not implemented matches for tun_keys. This means
that the current implementation only provides port-based tunneling
implemented on top of flow-bassed tunneling. It is not yet possible for a
controller to match on or set the tun_key of flows.
I expect this to be a small body of work to complete.
* The way that I have split the patchs is still somewhat arbitrary.
I wanted to avoid one very large patch to aid review. But a lot of the
chagnes are inter-related, so a bisectable split seems rather difficult.
None the less, the split could be significantly improved.
----------------------------------------------------------------------
Simon Horman (26):
datapath: tunnelling: Replace tun_id with tun_key
datapath: Use tun_key on transmit
odp-util: Add tun_key to parse_odp_key_attr()
vswitchd: Add iface_parse_tunnel
vswitchd: Add add_tunnel_ports()
ofproto: Add set_tunnelling()
vswitchd: Configure tunnel interfaces.
ofproto: Allow reception of packets from a tunnel tundev
ofproto: Add realdev_to_txdev()
ofproto: Add tundev_to_realdev()
classifier: Convert struct flow flow_metadata to use tun_key
datapath, vport: Provide tunnel realdev and tundev classes and vports
lib: Replace commit_set_tun_id_action() with
commit_set_tunnel_action()
global: Remove OVS_KEY_ATTR_TUN_ID
ofproto: Set flow tun_key in compose_output_action()
datapath: Remove mlink element from tnl_mutable_config
datapath: remove tunnel cache
datapath: Always use tun_key addresses for route lookup
dataptah: remove ttl and tos from tnl_mutable_config
datapath: Simplify vport lookup
datapath: Use tun_key flags for id and csum settings on transmit
datapath: Always use tun_key flags
ofproto: Store hdr_len in flow_tun_key and ofport_dpif_tun
datapath: Use hdr_len in tun_key of flow
route-table: Add route_table_get_mtu()
packets: Add MSS clamping of packets to be encapsulated by a tunnel
datapath/Modules.mk | 3 +-
datapath/actions.c | 6 +-
datapath/datapath.c | 11 +-
datapath/datapath.h | 5 +-
datapath/flow.c | 35 +-
datapath/flow.h | 27 +-
datapath/tunnel.c | 775 ++++------------------------------------
datapath/tunnel.h | 103 +-----
datapath/vport-capwap.c | 57 +--
datapath/vport-gre.c | 71 ++--
datapath/vport-tunnel-realdev.c | 260 ++++++++++++++
datapath/vport.c | 3 +-
datapath/vport.h | 1 +
include/linux/openvswitch.h | 14 +-
include/openvswitch/tunnel.h | 4 +
lib/classifier.c | 8 +-
lib/dpif-linux.c | 2 +-
lib/dpif-netdev.c | 2 +-
lib/flow.c | 31 +-
lib/flow.h | 24 +-
lib/meta-flow.c | 4 +-
lib/netdev-vport.c | 333 ++++-------------
lib/nx-match.c | 2 +-
lib/odp-util.c | 83 +++--
lib/odp-util.h | 3 +-
lib/ofp-print.c | 12 +-
lib/ofp-util.c | 4 +-
lib/packets.c | 113 ++++++
lib/packets.h | 20 ++
lib/route-table.c | 53 ++-
lib/route-table.h | 1 +
ofproto/ofproto-dpif.c | 415 +++++++++++++++++++--
ofproto/ofproto-provider.h | 12 +
ofproto/ofproto.c | 28 ++
ofproto/ofproto.h | 49 +++
tests/test-classifier.c | 7 +-
vswitchd/bridge.c | 368 +++++++++++++++++++
vswitchd/vswitch.xml | 23 ++
38 files changed, 1711 insertions(+), 1261 deletions(-)
create mode 100644 datapath/vport-tunnel-realdev.c
--
1.7.10.2.484.gcd07cc5
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev
