OK. Nothing special then. It could be that the userspace datapath simply doesn't work in the latest version of OVS. We don't test it very often, and this wouldn't be the first time that a bug had crept it. It does get some exposure in the unit tests, but the unit tests necessarily can't test the actual use with real system devices, so it's not a high-quality test.
Is there a particular reason you want to use the userspace datapath? The kernel datapath is far more important. Thanks, Ben. On Thu, Feb 09, 2012 at 09:32:28PM +0100, ravi.ke...@telekom.com wrote: > It has eth0. I am trying simple ping and ARP doesn't get resolved. Didn't see > ARP requests going out via tcpdump capture. I see following message with > dmesg | tail after ping started, didn't capture this before. Will look into > what this msg corresponds to, if this is a known issue please let me know > > [ 286.718153] Loading kernel module for a network device with > CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-tun instead > root@rkerur-ThinkPad-T400:~# > > root@rkerur-ThinkPad-T400:~# ovs-vsctl list-ports br0 > eth0 > > root@rkerur-ThinkPad-T400:~# arp -n > Address HWtype HWaddress Flags Mask > Iface > 10.117.46.193 (incomplete) br0 > > root@rkerur-ThinkPad-T400:~# route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > 10.117.46.192 0.0.0.0 255.255.255.240 U 0 0 0 br0 > 192.168.10.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 > root@rkerur-ThinkPad-T400:~# > > Thanks > Ravi > > -----Original Message----- > From: Ben Pfaff [mailto:b...@nicira.com] > Sent: Thursday, February 09, 2012 11:28 AM > To: Kerur, Ravi > Cc: dev@openvswitch.org > Subject: Re: [ovs-dev] Q on userspace OVS > > On Thu, Feb 09, 2012 at 08:02:39PM +0100, ravi.ke...@telekom.com wrote: > > I am testing userspace OVS and having trouble getting this to > > work. I have executed steps for building and installing except > > insmod and added "ovs-vsctl set bridge br0 > > datapath_type=netdev". Any additional debugs which will help > > understand why its not working or have I missed anything? Following > > are some details... > > What ports are on the bridge? What traffic is coming in? _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
