Are you using build --all? I am not sure what else could be wrong there. Something probably built in the wrong order. You might have to start from the beginning...
On Wed, Feb 3, 2016 at 1:37 PM, Patricia Shanahan <p...@acm.org> wrote: > Yes, there is certainly stuff to investigate. My latest failure is: > > /usr/bin/cp: missing destination file operand after > '/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ > wntmsci12.pro/lib/isvl.lib' > Try '/usr/bin/cp --help' for more information. > C:/OpenOfficeDev/Trunk/main/solenv/gbuild/StaticLibrary.mk:45: recipe for > target '/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ > wntmsci12.pro/lib/isvl.lib' failed > make: *** [/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ > wntmsci12.pro/lib/isvl.lib] Error 1 > dmake: Error code 2, while making 'all' > > 1 module(s): > xmloff > need(s) to be rebuilt > > Reason(s): > > ERROR: error 65280 occurred while making > /cygdrive/c/OpenOfficeDev/Trunk/main/xmloff/prj > > When you have fixed the errors in that module you can resume the build by > running: > > build --all:xmloff > > > > On 2/3/2016 3:33 AM, Damjan Jovanovic wrote: > >> main/oox/prj/build.lst already lists xmlscript as a dependency, so "build" >> should have built it before starting to build oox. Something must be very >> wrong for it not to. >> >> On Wed, Feb 3, 2016 at 1:28 PM, Patricia Shanahan <p...@acm.org> wrote: >> >> Yes, thanks. At least, it gets past oox. >>> >>> So one trick for a missing file is to explicitly build and deliver in the >>> directory the file should have come from. >>> >>> Later, I may do a new build from a clean check-out, and try to >>> investigate >>> anomalies. Right now, my objective is to just get it built. >>> >>> >>> On 2/3/2016 3:19 AM, Damjan Jovanovic wrote: >>> >>> That is strange. Does it work if you first do "build" and "deliver" in >>>> main/xmlscript? >>>> >>>> On Wed, Feb 3, 2016 at 1:07 PM, Patricia Shanahan <p...@acm.org> wrote: >>>> >>>> I am now getting to: >>>> >>>>> >>>>> Compiling: oox/source/ole/vbacontrol.cxx >>>>> C:/OpenOfficeDev/Trunk/main/oox/source/ole/vbacontrol.cxx(34) : fatal >>>>> error C1083: Cannot open include file: 'xmlscript/xmldlg_imexp.hxx': No >>>>> such file or directory >>>>> dmake: Error code 2, while making '../../ >>>>> wntmsci12.pro/slo/vbacontrol.obj >>>>> ' >>>>> >>>>> 1 module(s): >>>>> oox >>>>> need(s) to be rebuilt >>>>> >>>>> Reason(s): >>>>> >>>>> ERROR: error 65280 occurred while making >>>>> /cygdrive/c/OpenOfficeDev/Trunk/main/oox/source/ole >>>>> >>>>> >>>>> >>>>> On 2/2/2016 9:33 PM, Patricia Shanahan wrote: >>>>> >>>>> python had apparently not been built. I don't know why. I was able to >>>>> >>>>>> get the build going again with "build --all:python". >>>>>> >>>>>> It is now making progress, but from time-to-time I get this sort of >>>>>> failure: >>>>>> >>>>>> ====================================================================== >>>>>> c:/OpenOfficeDev/Trunk/main/svl/source/numbers/zformat.cxx(25) : fatal >>>>>> error C1859: >>>>>> 'c:/OpenOfficeDev/Trunk/main/solver/420/ >>>>>> >>>>>> wntmsci12.pro/workdir/PrecompiledHeader/nodebug/precompiled_svl.hxx.pch >>>>>> ' >>>>>> unexpected precompiled header error, simply rerunning the compiler >>>>>> might >>>>>> fix this problem >>>>>> C:/OpenOfficeDev/Trunk/main/solenv/gbuild/LinkTarget.mk:126: recipe >>>>>> for >>>>>> target >>>>>> '/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ >>>>>> wntmsci12.pro/workdir/CxxObject/svl/source/numbers/zformat.o' >>>>>> failed >>>>>> make: *** >>>>>> [/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ >>>>>> wntmsci12.pro/workdir/CxxObject/svl/source/numbers/zformat.o] >>>>>> Error 2 >>>>>> dmake: Error code 2, while making 'all' >>>>>> >>>>>> 1 module(s): >>>>>> svl >>>>>> need(s) to be rebuilt >>>>>> >>>>>> Reason(s): >>>>>> >>>>>> ERROR: error 65280 occurred while making >>>>>> /cygdrive/c/OpenOfficeDev/Trunk/main/svl/prj >>>>>> >>>>>> When you have fixed the errors in that module you can resume the build >>>>>> by running: >>>>>> >>>>>> build --all:svl >>>>>> ====================================================================== >>>>>> >>>>>> The build system knows the failure is potentially retriable. It tells >>>>>> me >>>>>> exactly what to type to do the retry. WHY can't it just retry itself, >>>>>> without needing my fingers on the keyboard? >>>>>> >>>>>> >>>>>> >>>>>> On 2/2/2016 8:10 AM, Patricia Shanahan wrote: >>>>>> >>>>>> OpenGrok looks and sounds like something I should learn about. >>>>>> >>>>>>> >>>>>>> I think my next step is to look into the state of python. Matters may >>>>>>> have been complicated because I did a "dmake clean" after changing my >>>>>>> configure parameters to use a 32 bit JDK, before continuing the steps >>>>>>> from configure on. >>>>>>> >>>>>>> There may be a pause - I have some non-programming stuff to do today >>>>>>> and >>>>>>> tomorrow morning. >>>>>>> >>>>>>> Thanks for all the help. Posting immediately on hitting a problem is >>>>>>> definitely getting faster progress than when I tried to puzzle things >>>>>>> out for myself first. >>>>>>> >>>>>>> On 2/2/2016 6:39 AM, Damjan Jovanovic wrote: >>>>>>> >>>>>>> OpenGrok[1] tells me the pyversion.mk file is in main/python; >>>>>>> through >>>>>>> >>>>>>>> building it would get delivered to main/solver/... and found by >>>>>>>> pyuno. >>>>>>>> Did >>>>>>>> python not build before pyuno did? pyuno/prj/build.lst lists a >>>>>>>> dependency >>>>>>>> on python when PYTHON is defined[2]: >>>>>>>> >>>>>>>> bgpu pyuno : stoc cpputools cppuhelper bridges tools >>>>>>>> PYTHON:python >>>>>>>> LIBXSLT:libxslt NULL >>>>>>>> >>>>>>>> but earlier you posted your config.log which had this in it: >>>>>>>> >>>>>>>> PYTHON='' >>>>>>>> >>>>>>>> and I am not sure whether that's enough. If the problem is that the >>>>>>>> python >>>>>>>> module isn't getting built first, you can force it to build first >>>>>>>> through >>>>>>>> one of these hacks: >>>>>>>> * delete the "PYTHON:" prefix to "python" from the build.lst line >>>>>>>> * manually building python before resuming the build: >>>>>>>> cd main/python >>>>>>>> build >>>>>>>> deliver >>>>>>>> cd ../instsetoo_native >>>>>>>> build --all -P2 -- -P2 >>>>>>>> >>>>>>>> References: >>>>>>>> [1] >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> http://opengrok.adfinis-sygroup.org/source/search?q=&defs=&refs=&path=pyversion.mk&hist=&project=aoo-trunk >>>>>>>> >>>>>>>> >>>>>>>> [2] >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/pyuno/prj/build.lst >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Feb 2, 2016 at 4:21 PM, Patricia Shanahan <p...@acm.org> >>>>>>>> wrote: >>>>>>>> >>>>>>>> Thanks. Now I get to: >>>>>>>> >>>>>>>> >>>>>>>>> ============= >>>>>>>>> Building module pyuno >>>>>>>>> ============= >>>>>>>>> >>>>>>>>> Entering /cygdrive/c/OpenOfficeDev/Trunk/main/pyuno/source/module >>>>>>>>> >>>>>>>>> mkout -- version: 1.8 >>>>>>>>> dmake: makefile.mk: line 56: Error: -- Include file >>>>>>>>> pyversion.mk, >>>>>>>>> not >>>>>>>>> found >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On 2/2/2016 4:18 AM, Damjan Jovanovic wrote: >>>>>>>>> >>>>>>>>> For me, main/icu fails to build on Windows about 50% of the time >>>>>>>>> >>>>>>>>> for no >>>>>>>>>> apparent reason; I've begun to think it's some sort of build race >>>>>>>>>> condition >>>>>>>>>> within that module. I haven't seen the buildbots fail there, and >>>>>>>>>> nobody >>>>>>>>>> else has reported this problem. >>>>>>>>>> >>>>>>>>>> If this is your problem, the only fix I know is the following >>>>>>>>>> hack: >>>>>>>>>> >>>>>>>>>> cd main/icu >>>>>>>>>> >>>>>>>>>> then keep cleaning and rebuilding it until it builds successfully: >>>>>>>>>> >>>>>>>>>> rm -rf wntmsci12.pro >>>>>>>>>> one of: dmake / build -P2 / build -- -P2 / build -P2 -- -P2 >>>>>>>>>> >>>>>>>>>> then when it does, continue as before: >>>>>>>>>> >>>>>>>>>> cd ../instsetoo_native >>>>>>>>>> build --all -P2 -- -P2 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Tue, Feb 2, 2016 at 2:00 PM, Patricia Shanahan <p...@acm.org> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Good. My latest error is: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> NMAKE : fatal error U1073: don't know how to make >>>>>>>>>>> '".\..\..\lib\icuin.lib"' >>>>>>>>>>> Stop. >>>>>>>>>>> NMAKE : fatal error U1077: >>>>>>>>>>> 'C:\PROGRA~2\MICROS~1.0\VC\bin\nmake.exe' : >>>>>>>>>>> return code '0x2' >>>>>>>>>>> Stop. >>>>>>>>>>> dmake: Error code 2, while making './ >>>>>>>>>>> wntmsci12.pro/misc/build/so_built_so_icu' >>>>>>>>>>> >>>>>>>>>>> I am hoping after this is all done to add a section on gotchas >>>>>>>>>>> and >>>>>>>>>>> their >>>>>>>>>>> symptoms to the step-by-step guide. That may save future new >>>>>>>>>>> developers >>>>>>>>>>> some time. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 2/2/2016 3:32 AM, Damjan Jovanovic wrote: >>>>>>>>>>> >>>>>>>>>>> I've documented this gotcha on both >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO/Step_by_step >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> and >>>>>>>>>>>> >>>>>>>>>>>> https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Feb 2, 2016 at 10:29 AM, Patricia Shanahan < >>>>>>>>>>>> p...@acm.org> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Thanks. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 2/1/2016 11:50 PM, Damjan Jovanovic wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> According to >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://stackoverflow.com/questions/19641685/java-jni-jawt-error-unresolved-external-symbol-imp-jawt-getawt8 >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> you're using a 64 bit JDK instead of a 32 bit one. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Feb 2, 2016 at 9:40 AM, Patricia Shanahan < >>>>>>>>>>>>>> p...@acm.org >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> After checking out with Cygwin's svn rather than TortoiseSVN, >>>>>>>>>>>>>> my >>>>>>>>>>>>>> build >>>>>>>>>>>>>> >>>>>>>>>>>>>> failed in "Building module bean" with the following message: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Creating library >>>>>>>>>>>>>>> ../../wntmsci12.pro/lib/iofficebean_t1.lib >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> object >>>>>>>>>>>>>>> ../../wntmsci12.pro/lib/iofficebean_t1.exp >>>>>>>>>>>>>>> officebean.lib(com_sun_star_comp_beans_LocalOfficeWindow.obj) >>>>>>>>>>>>>>> : >>>>>>>>>>>>>>> error >>>>>>>>>>>>>>> LNK2019: unresolved external symbol __imp__JAWT_GetAWT@8 >>>>>>>>>>>>>>> referenced >>>>>>>>>>>>>>> in >>>>>>>>>>>>>>> function >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> _Java_com_sun_star_comp_beans_LocalOfficeWindow_getNativeWindow@8 >>>>>>>>>>>>>>> ../../wntmsci12.pro/bin/officebean.dll : fatal error >>>>>>>>>>>>>>> LNK1120: >>>>>>>>>>>>>>> 1 >>>>>>>>>>>>>>> unresolved externals >>>>>>>>>>>>>>> dmake: Error code 96, while making '../../ >>>>>>>>>>>>>>> wntmsci12.pro/bin/officebean.dll' >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> To unsubscribe, e-mail: >>>>>>>>>>>>>>> dev-unsubscr...@openoffice.apache.org >>>>>>>>>>>>>>> For additional commands, e-mail: >>>>>>>>>>>>>>> dev-h...@openoffice.apache.org >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> To unsubscribe, e-mail: >>>>>>>>>>>>>>> dev-unsubscr...@openoffice.apache.org >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> For additional commands, e-mail: >>>>>>>>>>>>> dev-h...@openoffice.apache.org >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>> >>>>>>>>>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>>>>>>>>> >>>>>>>>>>>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>> >>>>>>>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>>>>>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> --------------------------------------------------------------------- >>>>>>>> >>>>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>>>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>>>>>> >>>>>>> >>>>>>> --------------------------------------------------------------------- >>>>>>> >>>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>>>> >>>>> >>>>> >>>>> >>>> --------------------------------------------------------------------- >>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>> >>> >>> >> > --------------------------------------------------------------------- > To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org > For additional commands, e-mail: dev-h...@openoffice.apache.org > >
