Hi, My main concern is just: a) getting the init patch ready and tested for March 1 b) having enough breaking changes to bundle in 13.0.0
On Thu, Feb 19, 2026, 10:54 AM Alan C. Assis <[email protected]> wrote: > I think the real concern is not the number, but the real reason to move to > release 13 at this moment. > > Normally we move the main release digit when there is a big breaking > change, but that is not the case here (not yet). > > This is why I agree with Matteo: let go with 12.13.0 (see your wanted 13 > here :-) ). > > BR, > > Alan > > On Thu, Feb 19, 2026 at 12:44 PM Alin Jerpelea <[email protected]> wrote: > > > Hi, > > > > I propose that we continue with 13 release since we already postponed it > > before and I can't see real blockers. > > > > Does anyone have concerns regarding proceeding with the 13 release ? > > > > Best regards > > Alin > > > > On Thu, 19 Feb 2026, 16:32 Matteo Golin, <[email protected]> wrote: > > > > > Hi Alin, > > > > > > That makes sense! Maybe we could consider doing another 12.x release > this > > > quarter then and saving 13.0.0 for the next quarter? What do you think? > > > > > > Matteo > > > > > > On Thu, Feb 19, 2026, 10:28 AM Alan C. Assis <[email protected]> > wrote: > > > > > > > Yes, I was not aware of 14 too, but when I was in Shenzhen some years > > > ago, > > > > I noticed some elevators skip the number 4. > > > > > > > > It could become a xkcd comedy: we end-up not using a number because > any > > > > number is bad luck in some countries. :-) > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 12:17 PM Matteo Golin < > [email protected]> > > > > wrote: > > > > > > > > > That is actually interesting. Anecdotally, here in Waterloo there > is > > a > > > > > significant Chinese community and so there are actually many > > apartment > > > > > buildings which do not have a 13th floor due to the superstition. > Of > > > > > course, the 13th floor exists, but it is given a different number. > > > > > > > > > > I would say I'm not strictly against using 14.0.0 or even 15.0.0 (I > > see > > > > 14 > > > > > is also unlucky in the Suse link) instead for the release. I don't > > > think > > > > > any NuttX users have mentioned this issue on the 13.0.0 discussions > > > > before > > > > > though. > > > > > > > > > > Matteo > > > > > > > > > > On Thu, Feb 19, 2026 at 10:09 AM Alan C. Assis <[email protected]> > > > > wrote: > > > > > > > > > > > Yes, I think we can postpone branching the release 13.0.0 to > > include > > > > the > > > > > > most important breaking changes on it (otherwise there is no need > > to > > > > > > increase the release digit if there are not significant changes). > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 12:02 PM Matteo Golin < > > > [email protected]> > > > > > > wrote: > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > May I provide an alternative view: 13 is a lucky number for > > > Italians > > > > :) > > > > > > > > > > > > > > In all seriousness, I do agree that March 1 might be a bit > early > > > for > > > > > the > > > > > > > 13.0.0 release. I know there are several other tasks on the > issue > > > > > tracker > > > > > > > for it, so I don't want to push it along with my changes here > > > > > > prematurely. > > > > > > > I'm not sure if the time representation getting pushed from 32b > > to > > > > 64b > > > > > > has > > > > > > > been merged, but I also wanted to tackle the empty apps docs > and > > > the > > > > > > > README.txt files for the big release. If we can bundle more > > > breaking > > > > > > > changes in time for 13.0.0 that is better, I think. I don't > mind > > > > > > > "maintaining" the init patch (since it's a moving target) as > the > > > > other > > > > > > > changes are getting ready; I don't think it would be too > > involved. > > > > > > > > > > > > > > I think releasing a 13.0.0 is fine anyways. I honestly don't > > think > > > > very > > > > > > > many upstream patches from 12.x users are going to be affected. > > > There > > > > > > > really aren't many crazy breaking changes to be in 13.0.0 yet, > > most > > > > > APIs > > > > > > > are the same. I also agree that there is too much involved in > > > having > > > > an > > > > > > LTS > > > > > > > or a separately maintained internal version. I would be in > > support > > > of > > > > > > > delaying the release for a longer testing period given the > major > > > > > version > > > > > > > bump, but I don't think we should treat 13.0.0 too much > > differently > > > > > from > > > > > > a > > > > > > > regular release. > > > > > > > > > > > > > > In terms of the actual change I'm making to the init, I think > it > > is > > > > > > quite a > > > > > > > large benefit because it finally prevents all the NuttX boards > > from > > > > > > relying > > > > > > > on user space code (NSH/boardctl) to bring up the board. I > > > > encountered > > > > > > this > > > > > > > issue a few times myself when trying to make my own apps an > entry > > > > point > > > > > > for > > > > > > > NuttX. It is definitely not the only thing that could be done > for > > > the > > > > > > boot > > > > > > > process, and I agree that we can also focus on documenting it > > > better. > > > > > > But, > > > > > > > I don't think there is a reason to object to this change and it > > has > > > > > been > > > > > > > discussed/desired by the community for a long time. I'm happy > to > > > > > explain > > > > > > > the change in more detail if my PR descriptions/the issue > > > discussion > > > > > > aren't > > > > > > > clear enough! > > > > > > > > > > > > > > Question for Alin: what is the normal process for breaking > > changes > > > in > > > > > > > releases? I'm wondering if its possible to merge into mainline > > and > > > > just > > > > > > > wait longer between the current version and 13.0.0 as other > > > breaking > > > > > > > changes catch up in development. That way mainline is the > "draft > > > > > 13.0.0" > > > > > > > and doesn't need special maintenance. Of course, if this > doesn't > > > fit > > > > in > > > > > > the > > > > > > > usual release process, I am happy to maintain the patch branch > > > until > > > > > > things > > > > > > > are ready! > > > > > > > > > > > > > > Best, > > > > > > > Matteo > > > > > > > > > > > > > > On Thu, Feb 19, 2026, 9:22 AM raiden00pl <[email protected] > > > > > > wrote: > > > > > > > > > > > > > > > No one serious will avoid NuttX because it's version 13. > Let's > > be > > > > > > > > serious, this > > > > > > > > is a community of engineers, not stock market traders. Don't > > > waste > > > > > time > > > > > > > > discussing superstitions, because it's starting to look like > AI > > > > bots > > > > > > > > discussion ;) > > > > > > > > > > > > > > > > czw., 19 lut 2026 o 15:12 Alan C. Assis <[email protected]> > > > > > > napisał(a): > > > > > > > > > > > > > > > > > But it will make it difficult to get their patches > integrated > > > > into > > > > > > the > > > > > > > > > mainline, since 12.x to 13.x will have a big difference. > > > > > > > > > > > > > > > > > > NuttX 12.0.0 was released on 2023-01-16, more than 3 years > > ago, > > > > so > > > > > I > > > > > > > > > suppose if we follow the same logic, users that decided to > > use > > > an > > > > > old > > > > > > > > > version could be using a version from more than 3 years > ago. > > > > > > > > > > > > > > > > > > We already have many issues in the project to worry about, > > > having > > > > > > users > > > > > > > > > avoiding using NuttX just because it has a 13.x release is > > > > > something > > > > > > I > > > > > > > > > think we can skip, we can avoid! :-) > > > > > > > > > > > > > > > > > > BR, > > > > > > > > > > > > > > > > > > Alan > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 11:00 AM Alin Jerpelea < > > > > [email protected] > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > such separation will be hard to maintain and will produce > > > > > confusion > > > > > > > > > > > > > > > > > > > > I think that it is better to have 13.xx.xx released on > the > > > > normal > > > > > > > cycle > > > > > > > > > and > > > > > > > > > > let users decide if they use the "stable 12.xx.xx > releases" > > > or > > > > > the > > > > > > > "new > > > > > > > > > > 13.xx.xx" > > > > > > > > > > I can add a Note to the release notes to clarify that > > 13.0.0 > > > > may > > > > > > need > > > > > > > > > some > > > > > > > > > > releases to shine > > > > > > > > > > > > > > > > > > > > Best regards > > > > > > > > > > Alin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 2:45 PM Alan C. Assis < > > > > [email protected] > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > Yes, I think LTS is not the way to go. > > > > > > > > > > > > > > > > > > > > > > But I agree with Tomek to keep version 13 as internal > > usage > > > > > only, > > > > > > > not > > > > > > > > > for > > > > > > > > > > > final users and companies. > > > > > > > > > > > > > > > > > > > > > > BR, > > > > > > > > > > > > > > > > > > > > > > Alan > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 10:28 AM Alin Jerpelea < > > > > > > [email protected] > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > > > > > > > With the resources available we can not start a LTS > > track > > > > > > > > > > > > I propose that we continue using, for now, the same > > > release > > > > > > > > procedure > > > > > > > > > > > > > > > > > > > > > > > > Best regards > > > > > > > > > > > > Alin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 1:57 PM raiden00pl < > > > > > > [email protected] > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > LTS was discussed on this list earlier, and the > > > > conclusion > > > > > > was > > > > > > > > that > > > > > > > > > > the > > > > > > > > > > > > > project > > > > > > > > > > > > > didn't have the resources to maintain LTS release. > I > > > > don't > > > > > > > think > > > > > > > > > > > anything > > > > > > > > > > > > > has > > > > > > > > > > > > > changed since then in terms of resources available > > (or > > > > > > should I > > > > > > > > say > > > > > > > > > > > it's > > > > > > > > > > > > > worse now?), > > > > > > > > > > > > > so bringing LTS release idea into this discussion > > > doesn't > > > > > > make > > > > > > > > much > > > > > > > > > > > > sense. > > > > > > > > > > > > > > > > > > > > > > > > > > czw., 19 lut 2026 o 13:44 Tomek CEDRO < > > > [email protected]> > > > > > > > > > napisał(a): > > > > > > > > > > > > > > > > > > > > > > > > > > > Or we could resemble FreeBSD organization to > match > > > > > > > progressive > > > > > > > > > and > > > > > > > > > > > > > > conservative crowd: > > > > > > > > > > > > > > 1. CURRENT is the master experimental branch > (i.e. > > > > > > > 13-CURRENT). > > > > > > > > > > > > > > 2. STABLE is well tested and not breaking branch > > > (i.e. > > > > > > > > > 12-STABLE). > > > > > > > > > > > > > > 3. RELEASE is snapshot of STABLE in time marked > > with > > > > > number > > > > > > > > > branch > > > > > > > > > > > > > > (i.e. 12.12-RELEASE). > > > > > > > > > > > > > > > > > > > > > > > > > > > > When CURRENT gets mature it goes STABLE (branch), > > > bumps > > > > > > > number > > > > > > > > > and > > > > > > > > > > > > > > starts experimenting (branch) again. STABLE gets > > > > updates > > > > > > and > > > > > > > > > fixes > > > > > > > > > > > > > > from CURRENT, but it also serves as source for > > > RELEASE > > > > > > > (branch) > > > > > > > > > > from > > > > > > > > > > > > > > time to time. If you need some fix from STABLE > but > > > you > > > > > use > > > > > > > > > RELEASE > > > > > > > > > > > you > > > > > > > > > > > > > > can build it safely.. except release is also tied > > to > > > > some > > > > > > > tools > > > > > > > > > > > > > > packages etc. Stability here in terms of API. > Plus > > > > > "compat" > > > > > > > > layer > > > > > > > > > > > that > > > > > > > > > > > > > > provides cross-version ABI compatibility (i.e. > 10.0 > > > > > binary > > > > > > > > works > > > > > > > > > > fine > > > > > > > > > > > > > > on 14.3). > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://www.freebsd.org/releng/ > > > > > > > > > > > > > > > > https://docs.freebsd.org/en/articles/freebsd-releng/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > It may sound fun but still a lot of maintenance > > work > > > > for > > > > > a > > > > > > > > small > > > > > > > > > > > > > > team.. maybe too much.. or just some inspiration > > :-) > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > CeDeROM, SQ7MHZ, http://www.tomek.cedro.info > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 1:17 PM Alan C. Assis < > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > That is a good idea! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The number 13 could be like a transition > > (passage) > > > > > > version, > > > > > > > > it > > > > > > > > > > > could > > > > > > > > > > > > be > > > > > > > > > > > > > > > considered a breaking version, before the final > > > > version > > > > > > > > > release. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In this version we will have the chance to > > improve > > > > the > > > > > > boot > > > > > > > > > > > > > > initialization > > > > > > > > > > > > > > > and other things, i.e.: currently we have the > > > common > > > > > > boards > > > > > > > > > that > > > > > > > > > > > have > > > > > > > > > > > > > > > drivers shared in the same chip family, but it > is > > > > > > possible > > > > > > > to > > > > > > > > > > > extend > > > > > > > > > > > > > this > > > > > > > > > > > > > > > idea to have these drivers working for all > chips. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +1 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > BR, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Alan > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 9:07 AM Tomek CEDRO < > > > > > > > > [email protected]> > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Well I also know some people in person that > > avoid > > > > 13 > > > > > at > > > > > > > all > > > > > > > > > > cost > > > > > > > > > > > it > > > > > > > > > > > > > is > > > > > > > > > > > > > > > > quite funny.. but for me 13 is kinda lucky > even > > > if > > > > > in a > > > > > > > > > > different > > > > > > > > > > > > > > > > way.. we may consider 13 internal testing and > > > then > > > > > just > > > > > > > go > > > > > > > > > 14.. > > > > > > > > > > > > > > > > whatever :D :D :D > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > CeDeROM, SQ7MHZ, http://www.tomek.cedro.info > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 12:44 PM Alan C. > Assis > > < > > > > > > > > > > > [email protected]> > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I agree! Also we need to decide whether to > > use > > > > the > > > > > > > number > > > > > > > > > 13 > > > > > > > > > > or > > > > > > > > > > > > > will > > > > > > > > > > > > > > skip > > > > > > > > > > > > > > > > > it! :-) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Historically it is proved that this number > is > > > not > > > > > > good > > > > > > > > > luck, > > > > > > > > > > > even > > > > > > > > > > > > > > NASA > > > > > > > > > > > > > > > > when > > > > > > > > > > > > > > > > > tried to insist on it (what could go wrong, > > > NASA > > > > > has > > > > > > > the > > > > > > > > > > > smartest > > > > > > > > > > > > > > people > > > > > > > > > > > > > > > > on > > > > > > > > > > > > > > > > > the planet), that resulted in a > catastrophic > > > > event > > > > > > that > > > > > > > > > > almost > > > > > > > > > > > > > ended > > > > > > > > > > > > > > up > > > > > > > > > > > > > > > > > with the life of 3 persons. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ok, maybe I'll writing it as a joke, but > > > imagine > > > > > > > someone > > > > > > > > > > > > > considering > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > > use > > > > > > > > > > > > > > > > > NuttX, if they have any doubt they will not > > use > > > > > NuttX > > > > > > > 13 > > > > > > > > > for > > > > > > > > > > > > sure! > > > > > > > > > > > > > > :-D > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > So, I vote for NuttX 14 :-D > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > BR, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Alan > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 8:22 AM Tomek > CEDRO < > > > > > > > > > > [email protected]> > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I would not rush with the 13 and keep it > > for > > > > time > > > > > > > when > > > > > > > > > most > > > > > > > > > > > > > > breaking > > > > > > > > > > > > > > > > > > things are settled and we could call it > > first > > > > LTS > > > > > > > > > release, > > > > > > > > > > > > until > > > > > > > > > > > > > > then > > > > > > > > > > > > > > > > > > stick to 12 and small improvements in > minor > > > > > > releases, > > > > > > > > > but I > > > > > > > > > > > > will > > > > > > > > > > > > > > > > > > follow the community voice :-) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > > > CeDeROM, SQ7MHZ, > > http://www.tomek.cedro.info > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 19, 2026 at 7:23 AM Alin > > > Jerpelea < > > > > > > > > > > > > > [email protected]> > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Matteo, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I will fork the next release branch on > > 1st > > > of > > > > > > March > > > > > > > > so > > > > > > > > > > that > > > > > > > > > > > > we > > > > > > > > > > > > > > have 1 > > > > > > > > > > > > > > > > > > month > > > > > > > > > > > > > > > > > > > to test the release. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I propose that we name this release > > 13.0.0 > > > > and > > > > > we > > > > > > > put > > > > > > > > > all > > > > > > > > > > > > > planned > > > > > > > > > > > > > > > > > > breacking > > > > > > > > > > > > > > > > > > > changes in the new release > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best regards > > > > > > > > > > > > > > > > > > > Alin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, 19 Feb 2026, 06:47 Matteo > Golin, > > < > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hello everyone, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have decided to work on tackling > this > > > > > issue: > > > > > > > > > > > > > > > > > > > > > > > > https://github.com/apache/nuttx/issues/11321 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The crux of it is: many boards rely > on > > > NSH > > > > to > > > > > > > > > > initialize > > > > > > > > > > > > > > > > > > > > peripherals/board-level systems. This > > is > > > > done > > > > > > > > through > > > > > > > > > > the > > > > > > > > > > > > > > > > user-space > > > > > > > > > > > > > > > > > > call > > > > > > > > > > > > > > > > > > > > to boardctl(BOARDIOC_INIT). However, > > > > > > > > > > > BOARD_LATE_INITIALIZE > > > > > > > > > > > > > also > > > > > > > > > > > > > > > > does > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > same thing. This is confusing for > many > > > > users > > > > > > and > > > > > > > > also > > > > > > > > > > > > results > > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > boards > > > > > > > > > > > > > > > > > > > > having out-of-sync init methods (i.e. > > > > > late_init > > > > > > > > does > > > > > > > > > > > > > something > > > > > > > > > > > > > > > > > > different > > > > > > > > > > > > > > > > > > > > than app_init, but they shouldn't). > To > > > > > simplify > > > > > > > the > > > > > > > > > > > > > > initialization > > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > reduce user confusion, the suggestion > > was > > > > to > > > > > > > > > completely > > > > > > > > > > > > > remove > > > > > > > > > > > > > > > > > > > > BOARDIOC_INIT/board_app_initialize > and > > > > > > > NSH_ARCHINIT > > > > > > > > > in > > > > > > > > > > > > favour > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > > > > > > BOARD_LATE_INITIALIZE. This is a > > massive > > > > > > breaking > > > > > > > > > > change > > > > > > > > > > > > and > > > > > > > > > > > > > > was > > > > > > > > > > > > > > > > put > > > > > > > > > > > > > > > > > > on the > > > > > > > > > > > > > > > > > > > > to-do list for 13.0.0 but it hadn't > > been > > > > > picked > > > > > > > up > > > > > > > > > yet > > > > > > > > > > > and > > > > > > > > > > > > > > we're > > > > > > > > > > > > > > > > still > > > > > > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > > > > > time for 13.0.0. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have a draft PR open here to the > > kernel > > > > > with > > > > > > > most > > > > > > > > > of > > > > > > > > > > > the > > > > > > > > > > > > > > boards > > > > > > > > > > > > > > > > > > adhering > > > > > > > > > > > > > > > > > > > > to the new changes: > > > > > > > > > > > > > https://github.com/apache/nuttx/pull/18408 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > And here to the apps repo removing > > > > references > > > > > > to > > > > > > > > > > > > > BOARDIOC_INIT > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > > > NSH_ARCHINIT: > > > > > > > > > > > > https://github.com/apache/nuttx-apps/pull/3405 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > These PRs are large, introduce > breaking > > > > > > changes, > > > > > > > > and > > > > > > > > > > > touch > > > > > > > > > > > > > many > > > > > > > > > > > > > > > > > > different > > > > > > > > > > > > > > > > > > > > boards (not all of which I am able to > > > test > > > > on > > > > > > my > > > > > > > > > > limited > > > > > > > > > > > > > > hardware > > > > > > > > > > > > > > > > > > set). I > > > > > > > > > > > > > > > > > > > > would appreciate eyes on these PRs to > > see > > > > if > > > > > > > there > > > > > > > > > are > > > > > > > > > > > any > > > > > > > > > > > > > > flaws > > > > > > > > > > > > > > > > in my > > > > > > > > > > > > > > > > > > > > initial approach and also in case > > anyone > > > > > would > > > > > > > like > > > > > > > > > to > > > > > > > > > > > > > > volunteer to > > > > > > > > > > > > > > > > > > test > > > > > > > > > > > > > > > > > > > > the changes on some hardware (I don't > > own > > > > > > > anything > > > > > > > > > with > > > > > > > > > > > an > > > > > > > > > > > > > > STM32 > > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > > > > > > instance). > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The CI is also going to report a lot > of > > > > > errors > > > > > > > due > > > > > > > > to > > > > > > > > > > the > > > > > > > > > > > > > > changes > > > > > > > > > > > > > > > > being > > > > > > > > > > > > > > > > > > > > across both repositories (and they > will > > > be > > > > > out > > > > > > of > > > > > > > > > sync > > > > > > > > > > > with > > > > > > > > > > > > > > each > > > > > > > > > > > > > > > > other > > > > > > > > > > > > > > > > > > in > > > > > > > > > > > > > > > > > > > > the CI runs), hence the importance of > > > > testing > > > > > > :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks for your feedback in advance > > (and > > > > > maybe > > > > > > > your > > > > > > > > > > time > > > > > > > > > > > > > > testing > > > > > > > > > > > > > > > > if you > > > > > > > > > > > > > > > > > > > > can!) > > > > > > > > > > > > > > > > > > > > Matteo > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
