Hello Alan, Thank you for the quick response, I'm using SAM v7 as base for my based ATSAME70 pcb, now i'm getting closer to the rootcause, i'm suspecting my arm gcc toolchain got corrupted while i was trying to set up cross compiler to use cpython on my board (i later found out this is only for virtua board ? ) so i will try to reset my arm gcc and its paths, if this doesn't work, i will ask for help again. Best regards,
Am Mo., 2. Juni 2025 um 17:44 Uhr schrieb Alan C. Assis <acas...@gmail.com>: > Hi Oussama, > > Could you please tell us which board and profile you are using? > > Although mqueue.h is in the local directory the root directory (fs/) should > be in the path, then the file should be found. > > Note that there is a "notify/notify.h" that follows the same logic (it is > at fs/). > > BR, > > Alan > > On Mon, Jun 2, 2025 at 12:20 PM Oussama Louati > <ouss...@ingenieurbuero-filgis.de.invalid> wrote: > > > Hello Nuttx Community, > > My arm gcc compiler is failing to find MAX_MQUEUE_PATH when i'm building, > > if i change #include "mqueue/mqueue.h" in the files mq_open.c and > > mq_unlink.c to #include "mqueue.h", which make sense because the file is > in > > the same folder, it works. > > Am I missing something on the bigger picture ? > > I would appreciate your help on this. > > Best regards. > > Oussama Louati > > Embedded Systems Engineer > > >
