Hello Roberto, It would be good if you can dump assembly that is generated. What I see is that "int spi_register(FAR struct spi_dev_s *spi, int bus)", so I'm assuming that R0 should be "spi" and R1 should be "bus", but in your dump "R0: 00000001 R1: 2004e840" those seems to be inverted (00000001 seems to be a "bus" and "2004e840" seems to be a "spi" pointer). The assembly code will show light on the dump that you provided. As an alternative you can provide the defconfig that you use if you are not using a custom board.
Best regards, Petro нд, 6 бер. 2022 р. о 10:54 Roberto Bucher <roberto.buc...@supsi.ch> пише: > When I enable some dubug configs > > > > I get the following error by enter in the serial shell: > > sert: Assertion failed at file:spi/spi_driver.c line: 358 > arm_registerdump: R0: 00000001 R1: 2004e840 R2: 40004800 R3: 20010684 > arm_registerdump: R4: 2004e7a0 R5: 00000002 R6: 2004f370 FP: 20010670 > arm_registerdump: R8: 00000000 SB: 00000000 SL: 00000000 R11: 00000000 > arm_registerdump: IP: 00000003 SP: 2004f370 LR: 08005fad PC: 0800648e > arm_registerdump: xPSR: 61000000 PRIMASK: 00000000 CONTROL: 00000004 > arm_registerdump: EXC_RETURN: ffffffe9 > arm_dump_stack: User Stack: > > On the line 358 of spi_driver.c there is this assertion: > > /* Sanity check */ > > DEBUGASSERT(spi != NULL && (unsigned)bus < 1000); > > Any Idea? > > Best regards > > Roberto > > > >
