s/right/write/ Sorry for the typo
On 8/25/21, Alan Carvalho de Assis <acas...@gmail.com> wrote: > Hi Tim, > > Congratulations! We are happy to see your progress with NuttX. > > If you want to help future "Tim"s please right a small documentation about > it. > > You can create it at: > > Documentation/guides/eeprom_spi.rst > > BR, > > Alan > > On 8/25/21, Tim Hardisty <t...@jti.uk.com.invalid> wrote: >> My board is now correctly registering the SPI instance and binding the >> relevant SPI and CS to the SPI Flash driver. >> >> >> It was an uphill struggle, but thanks to all your various suggestions I >> have got there and learned more than I wanted to! >> >> Next hurdle is to trawl through other boards to learn how to "automount" >> my SPI flash as a file system - maybe SMART or maybe MXFSS; right now, >> any file system mounting from my board or app init function would be good >> :) >> >> On 24/08/2021 16:53, Alan Carvalho de Assis wrote: >>> Hi Tim, >>> >>> It seams like MT25Q uses the m25px.c driver, so I assume you are >>> enabling the CONFIG_MT25Q_MEMORY_TYPE right? >>> >>> Next you need to configure our board SPI CS pin, please take a look >>> at: arm/stm32/mikroe-stm32f4/src/stm32_spi.c >>> >>> Then before try to setup the NXFFS you need to confirm that the Flash >>> NOR was detected correctly. >>> >>> BR, >>> >>> Alan >>> >>> On 8/24/21, Tim <t...@jti.uk.com.invalid> wrote: >>>> Does anyone have any pointers on how to setup nxfss (or any filesystem >>>> for >>>> that matter) on an MT25Q nor flash? >>>> >>>> >>>> >>>> I cannot find any code for any other boards that makes any sense to me >>>> and >>>> I >>>> feel this should be a pretty basic thing to want to do? I believe I >>>> have >>>> set >>>> up all the SPI stuff and now need to (auto)mount it in my bringup or >>>> app >>>> init code, but I'm stuck :( >>>> >>>> >>>> >>>> "CONFIG_HAVE_M25P" is as far as I have got. >>>> >>>> >>>> >>>> SAMA5D27 device. >>>> >>>> >>>> >>>> TIA, >>>> >>>> >>>> >>>> Tim. >>>> >>>> >>>> >>>> >> >
