Hi Tim, It seams like MT25Q uses the m25px.c driver, so I assume you are enabling the CONFIG_MT25Q_MEMORY_TYPE right?
Next you need to configure our board SPI CS pin, please take a look at: arm/stm32/mikroe-stm32f4/src/stm32_spi.c Then before try to setup the NXFFS you need to confirm that the Flash NOR was detected correctly. BR, Alan On 8/24/21, Tim <t...@jti.uk.com.invalid> wrote: > Does anyone have any pointers on how to setup nxfss (or any filesystem for > that matter) on an MT25Q nor flash? > > > > I cannot find any code for any other boards that makes any sense to me and > I > feel this should be a pretty basic thing to want to do? I believe I have > set > up all the SPI stuff and now need to (auto)mount it in my bringup or app > init code, but I'm stuck :( > > > > "CONFIG_HAVE_M25P" is as far as I have got. > > > > SAMA5D27 device. > > > > TIA, > > > > Tim. > > > >
