Hello Brennan
Plans changed, i had spent a lot of time today on NRF52832 then i suspect that should be a Softdevice Version (132) Then i ported the NRF52840 and repeated all the process, and finally that error was removed. Look the boot ABCDEG bt_initialize: btdev 0x47384 bt_hci_cmd_create: opcode 0c03 param_len 0 bt_buf_alloc: buf 0x20002c40 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c40 bt_buf_extend: buf 0x20002c40 len 3 bt_hci_cmd_send_sync: opcode 0c03 len 3 hci_tx_kthread: started bt_buf_addref: buf 0x20002c40 (old) ref 1 type 0 hci_tx_kthread: Sending command 0c03 buf 0x20002c40 to driver bt_hci_send: passing CMD 3075 to softdevice bt_buf_release: buf 0x20002c40 ref 2 type 0 bt_buf_release: Remaining references: 1 on_hci: received CMD_COMPLETE from softdevice (opcode: 3075, status: 0x3) bt_buf_alloc: buf 0x20002c28 type 1 reserve 1 bt_buf_extend: buf 0x20002c28 len 6 bt_hci_receive: buf 0x20002c28 len 6 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c28 type 1 len 6 bt_buf_consume: buf 0x20002c28 len 2 hci_cmd_complete: opcode 0c03 bt_buf_consume: buf 0x20002c28 len 3 hci_reset_complete: status 0 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 1 bt_buf_release: buf 0x20002c40 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c40 bt_buf_release: buf 0x20002c28 ref 2 type 1 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c40 ref 0 type 0 bt_buf_release: Remaining references: 255 bt_buf_release: buf 0x20002c28 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c28 bt_hci_cmd_create: opcode 1003 param_len 0 bt_buf_alloc: buf 0x20002c28 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c28 bt_buf_extend: buf 0x20002c28 len 3 bt_hci_cmd_send_sync: opcode 1003 len 3 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 0 hci_tx_kthread: Sending command 1003 buf 0x20002c28 to driver bt_hci_send: passing CMD 4099 to softdevice bt_buf_release: buf 0x20002c28 ref 2 type 0 bt_buf_release: Remaining references: 1 on_hci: received CMD_COMPLETE from softdevice (opcode: 4099, status: 0x3) bt_buf_alloc: buf 0x20002c40 type 1 reserve 1 bt_buf_extend: buf 0x20002c40 len 14 bt_hci_receive: buf 0x20002c40 len 14 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c40 type 1 len 14 bt_buf_consume: buf 0x20002c40 len 2 hci_cmd_complete: opcode 1003 bt_buf_consume: buf 0x20002c40 len 3 hci_cmd_complete: Unhandled opcode 1003 bt_buf_addref: buf 0x20002c40 (old) ref 1 type 1 bt_buf_release: buf 0x20002c28 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c28 bt_buf_release: buf 0x20002c40 ref 2 type 1 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c28 ref 0 type 0 bt_buf_release: Remaining references: 255 read_local_features_complete: status 0 bt_buf_release: buf 0x20002c40 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c40 bt_hci_cmd_create: opcode 1001 param_len 0 bt_buf_alloc: buf 0x20002c40 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c40 bt_buf_extend: buf 0x20002c40 len 3 bt_hci_cmd_send_sync: opcode 1001 len 3 bt_buf_addref: buf 0x20002c40 (old) ref 1 type 0 hci_tx_kthread: Sending command 1001 buf 0x20002c40 to driver bt_hci_send: passing CMD 4097 to softdevice bt_buf_release: buf 0x20002c40 ref 2 type 0 bt_buf_release: Remaining references: 1 on_hci: received CMD_COMPLETE from softdevice (opcode: 4097, status: 0x1) bt_buf_alloc: buf 0x20002c28 type 1 reserve 1 bt_buf_extend: buf 0x20002c28 len 14 bt_hci_receive: buf 0x20002c28 len 14 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c28 type 1 len 14 bt_buf_consume: buf 0x20002c28 len 2 hci_cmd_complete: opcode 1001 bt_buf_consume: buf 0x20002c28 len 3 hci_cmd_complete: Unhandled opcode 1001 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 1 bt_buf_release: buf 0x20002c40 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c40 bt_buf_release: buf 0x20002c28 ref 2 type 1 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c40 ref 0 type 0 bt_buf_release: Remaining references: 255 read_local_ver_complete: status 0 bt_buf_release: buf 0x20002c28 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c28 bt_hci_cmd_create: opcode 1009 param_len 0 bt_buf_alloc: buf 0x20002c28 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c28 bt_buf_extend: buf 0x20002c28 len 3 bt_hci_cmd_send_sync: opcode 1009 len 3 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 0 hci_tx_kthread: Sending command 1009 buf 0x20002c28 to driver bt_hci_send: passing CMD 4105 to softdevice bt_buf_release: buf 0x20002c28 ref 2 type 0 bt_buf_release: Remaining references: 1 on_hci: received CMD_COMPLETE from softdevice (opcode: 4105, status: 0x9) bt_buf_alloc: buf 0x20002c40 type 1 reserve 1 bt_buf_extend: buf 0x20002c40 len 12 bt_hci_receive: buf 0x20002c40 len 12 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c40 type 1 len 12 bt_buf_consume: buf 0x20002c40 len 2 hci_cmd_complete: opcode 1009 bt_buf_consume: buf 0x20002c40 len 3 hci_cmd_complete: Unhandled opcode 1009 bt_buf_addref: buf 0x20002c40 (old) ref 1 type 1 bt_buf_release: buf 0x20002c28 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c28 bt_buf_release: buf 0x20002c40 ref 2 type 1 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c28 ref 0 type 0 bt_buf_release: Remaining references: 255 read_bdaddr_complete: status 0 bt_buf_release: buf 0x20002c40 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c40 bt_hci_cmd_create: opcode 2003 param_len 0 bt_buf_alloc: buf 0x20002c40 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c40 bt_buf_extend: buf 0x20002c40 len 3 bt_hci_cmd_send_sync: opcode 2003 len 3 bt_buf_addref: buf 0x20002c40 (old) ref 1 type 0 hci_tx_kthread: Sending command 2003 buf 0x20002c40 to driver bt_hci_send: passing CMD 8195 to softdevice bt_buf_release: buf 0x20002c40 ref 2 type 0 bt_buf_release: Remaining references: 1 on_hci: received CMD_COMPLETE from softdevice (opcode: 8195, status: 0x3) bt_buf_alloc: buf 0x20002c28 type 1 reserve 1 bt_buf_extend: buf 0x20002c28 len 14 bt_hci_receive: buf 0x20002c28 len 14 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c28 type 1 len 14 bt_buf_consume: buf 0x20002c28 len 2 hci_cmd_complete: opcode 2003 bt_buf_consume: buf 0x20002c28 len 3 hci_cmd_complete: Unhandled opcode 2003 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 1 bt_buf_release: buf 0x20002c40 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c40 bt_buf_release: buf 0x20002c28 ref 2 type 1 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c40 ref 0 type 0 bt_buf_release: Remaining references: 255 read_le_features_complete: status 0 bt_buf_release: buf 0x20002c28 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c28 bt_hci_cmd_create: opcode 2002 param_len 0 bt_buf_alloc: buf 0x20002c28 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c28 bt_buf_extend: buf 0x20002c28 len 3 bt_hci_cmd_send_sync: opcode 2002 len 3 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 0 hci_tx_kthread: Sending command 2002 buf 0x20002c28 to driver bt_hci_send: passing CMD 8194 to softdevice bt_buf_release: buf 0x20002c28 ref 2 type 0 bt_buf_release: Remaining references: 1 on_hci: received CMD_COMPLETE from softdevice (opcode: 8194, status: 0x2) bt_buf_alloc: buf 0x20002c40 type 1 reserve 1 bt_buf_extend: buf 0x20002c40 len 9 bt_hci_receive: buf 0x20002c40 len 9 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c40 type 1 len 9 bt_buf_consume: buf 0x20002c40 len 2 hci_cmd_complete: opcode 2002 bt_buf_consume: buf 0x20002c40 len 3 hci_cmd_complete: Unhandled opcode 2002 bt_buf_addref: buf 0x20002c40 (old) ref 1 type 1 bt_buf_release: buf 0x20002c28 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c28 bt_buf_release: buf 0x20002c40 ref 2 type 1 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c28 ref 0 type 0 bt_buf_release: Remaining references: 255 le_read_buffer_size_complete: status 0 bt_buf_release: buf 0x20002c40 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c40 bt_hci_cmd_create: opcode 0c01 param_len 8 bt_buf_alloc: buf 0x20002c40 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c40 bt_buf_extend: buf 0x20002c40 len 3 bt_buf_extend: buf 0x20002c40 len 8 bt_buf_addref: buf 0x20002c40 (old) ref 1 type 0 bt_hci_cmd_send_sync: opcode 0c01 len 11 bt_buf_addref: buf 0x20002c40 (old) ref 2 type 0 hci_tx_kthread: Sending command 0c01 buf 0x20002c40 to driver bt_hci_send: passing CMD 3073 to softdevice bt_buf_release: buf 0x20002c40 ref 3 type 0 bt_buf_release: Remaining references: 2 on_hci: received CMD_COMPLETE from softdevice (opcode: 3073, status: 0x1) bt_buf_alloc: buf 0x20002c28 type 1 reserve 1 bt_buf_extend: buf 0x20002c28 len 6 bt_hci_receive: buf 0x20002c28 len 6 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c28 type 1 len 6 bt_buf_consume: buf 0x20002c28 len 2 hci_cmd_complete: opcode 0c01 bt_buf_consume: buf 0x20002c28 len 3 hci_cmd_complete: Unhandled opcode 0c01 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 1 bt_buf_release: buf 0x20002c40 ref 2 type 0 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c28 ref 2 type 1 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c28 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c28 bt_buf_release: buf 0x20002c40 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c40 bt_hci_cmd_create: opcode 0c33 param_len 7 bt_buf_alloc: buf 0x20002c40 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c40 bt_buf_extend: buf 0x20002c40 len 3 bt_buf_extend: buf 0x20002c40 len 7 bt_buf_addref: buf 0x20002c40 (old) ref 1 type 0 bt_hci_cmd_send: opcode 0c33 len 10 bt_hci_cmd_create: opcode 0c31 param_len 1 bt_buf_alloc: buf 0x20002c28 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c28 bt_buf_extend: buf 0x20002c28 len 3 bt_buf_extend: buf 0x20002c28 len 1 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 0 bt_hci_cmd_send_sync: opcode 0c31 len 4 bt_buf_addref: buf 0x20002c40 (old) ref 2 type 0 hci_tx_kthread: Sending command 0c33 buf 0x20002c40 to driver bt_hci_send: passing CMD 3123 to softdevice bt_buf_release: buf 0x20002c40 ref 3 type 0 bt_buf_release: Remaining references: 2 on_hci: received CMD_COMPLETE from softdevice (opcode: 3123, status: 0x33) bt_buf_alloc: buf 0x20002c10 type 1 reserve 1 bt_buf_extend: buf 0x20002c10 len 6 bt_hci_receive: buf 0x20002c10 len 6 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c10 type 1 len 6 bt_buf_consume: buf 0x20002c10 len 2 hci_cmd_complete: opcode 0c33 bt_buf_consume: buf 0x20002c10 len 3 hci_cmd_complete: Unhandled opcode 0c33 bt_buf_release: buf 0x20002c40 ref 2 type 0 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c10 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c10 bt_buf_addref: buf 0x20002c28 (old) ref 2 type 0 hci_tx_kthread: Sending command 0c31 buf 0x20002c28 to driver bt_hci_send: passing CMD 3121 to softdevice bt_buf_release: buf 0x20002c28 ref 3 type 0 bt_buf_release: Remaining references: 2 on_hci: received CMD_COMPLETE from softdevice (opcode: 3121, status: 0x31) bt_buf_alloc: buf 0x20002c10 type 1 reserve 1 bt_buf_extend: buf 0x20002c10 len 6 bt_hci_receive: buf 0x20002c10 len 6 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002c10 type 1 len 6 bt_buf_consume: buf 0x20002c10 len 2 hci_cmd_complete: opcode 0c31 bt_buf_consume: buf 0x20002c10 len 3 hci_cmd_complete: Unhandled opcode 0c31 bt_buf_addref: buf 0x20002c10 (old) ref 1 type 1 bt_buf_release: buf 0x20002c28 ref 2 type 0 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c10 ref 2 type 1 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002c10 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002c10 bt_buf_release: buf 0x20002c28 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c28 hci_initialize: HCI ver 11 rev 4387, manufacturer 89 hci_initialize: ACL buffers: pkts 3 mtu 27 bt_l2cap_chan_register: CID 0x0004 bt_l2cap_chan_register: CID 0x0006 bt_l2cap_chan_register: CID 0x0005 NuttShell (NSH) NuttX-10.1.0-RC1 nsh> This is the config # # Automatically generated file; DO NOT EDIT. # NuttX/x86_64 Configuration # # # Build Setup # # CONFIG_EXPERIMENTAL is not set # CONFIG_DEFAULT_SMALL is not set CONFIG_HOST_LINUX=y # CONFIG_HOST_MACOS is not set # CONFIG_HOST_WINDOWS is not set # CONFIG_HOST_OTHER is not set # # Build Configuration # CONFIG_APPS_DIR="../apps" CONFIG_BUILD_FLAT=y # CONFIG_BUILD_2PASS is not set # # Binary Output Formats # CONFIG_INTELHEX_BINARY=y # CONFIG_MOTOROLA_SREC is not set # CONFIG_RAW_BINARY is not set # CONFIG_UBOOT_UIMAGE is not set # CONFIG_DFU_BINARY is not set # # Customize Header Files # # CONFIG_ARCH_HAVE_STDINT_H is not set # CONFIG_ARCH_HAVE_STDBOOL_H is not set # CONFIG_ARCH_HAVE_MATH_H is not set # CONFIG_ARCH_FLOAT_H is not set CONFIG_ARCH_HAVE_STDARG_H=y CONFIG_ARCH_STDARG_H=y CONFIG_ARCH_HAVE_SETJMP=y # CONFIG_ARCH_SETJMP_H is not set CONFIG_ARCH_NONE_DEBUG_H=y # CONFIG_ARCH_DEBUG_H is not set # CONFIG_ARCH_CHIP_DEBUG_H is not set # # Debug Options # CONFIG_DEBUG_ALERT=y # CONFIG_DEBUG_FEATURES is not set CONFIG_ARCH_HAVE_STACKCHECK=y # CONFIG_STACK_COLORATION is not set # CONFIG_STACK_CANARIES is not set # CONFIG_ARCH_HAVE_HEAPCHECK is not set # CONFIG_DEBUG_SYMBOLS is not set CONFIG_ARCH_HAVE_CUSTOMOPT=y # CONFIG_DEBUG_NOOPT is not set # CONFIG_DEBUG_CUSTOMOPT is not set CONFIG_DEBUG_FULLOPT=y # # System Type # CONFIG_ARCH_ARM=y # CONFIG_ARCH_AVR is not set # CONFIG_ARCH_HC is not set # CONFIG_ARCH_MIPS is not set # CONFIG_ARCH_MISOC is not set # CONFIG_ARCH_RENESAS is not set # CONFIG_ARCH_RISCV is not set # CONFIG_ARCH_SIM is not set # CONFIG_ARCH_X86 is not set # CONFIG_ARCH_X86_64 is not set # CONFIG_ARCH_XTENSA is not set # CONFIG_ARCH_Z16 is not set # CONFIG_ARCH_Z80 is not set # CONFIG_ARCH_OR1K is not set CONFIG_ARCH="arm" # # ARM Options # # CONFIG_ARCH_CHIP_A1X is not set # CONFIG_ARCH_CHIP_AM335X is not set # CONFIG_ARCH_CHIP_C5471 is not set # CONFIG_ARCH_CHIP_DM320 is not set # CONFIG_ARCH_CHIP_EFM32 is not set # CONFIG_ARCH_CHIP_EOSS3 is not set # CONFIG_ARCH_CHIP_IMX1 is not set # CONFIG_ARCH_CHIP_IMX6 is not set # CONFIG_ARCH_CHIP_IMXRT is not set # CONFIG_ARCH_CHIP_KINETIS is not set # CONFIG_ARCH_CHIP_KL is not set # CONFIG_ARCH_CHIP_LC823450 is not set # CONFIG_ARCH_CHIP_LM is not set # CONFIG_ARCH_CHIP_LPC17XX_40XX is not set # CONFIG_ARCH_CHIP_LPC214X is not set # CONFIG_ARCH_CHIP_LPC2378 is not set # CONFIG_ARCH_CHIP_LPC31XX is not set # CONFIG_ARCH_CHIP_LPC43XX is not set # CONFIG_ARCH_CHIP_LPC54XX is not set # CONFIG_ARCH_CHIP_MAX326XX is not set # CONFIG_ARCH_CHIP_MOXART is not set CONFIG_ARCH_CHIP_NRF52=y # CONFIG_ARCH_CHIP_NUC1XX is not set # CONFIG_ARCH_CHIP_RP2040 is not set # CONFIG_ARCH_CHIP_S32K1XX is not set # CONFIG_ARCH_CHIP_SAMA5 is not set # CONFIG_ARCH_CHIP_SAMD2X is not set # CONFIG_ARCH_CHIP_SAML2X is not set # CONFIG_ARCH_CHIP_SAMD5X is not set # CONFIG_ARCH_CHIP_SAME5X is not set # CONFIG_ARCH_CHIP_SAM34 is not set # CONFIG_ARCH_CHIP_SAMV7 is not set # CONFIG_ARCH_CHIP_STM32 is not set # CONFIG_ARCH_CHIP_STM32F0 is not set # CONFIG_ARCH_CHIP_STM32L0 is not set # CONFIG_ARCH_CHIP_STM32G0 is not set # CONFIG_ARCH_CHIP_STM32F7 is not set # CONFIG_ARCH_CHIP_STM32H7 is not set # CONFIG_ARCH_CHIP_STM32L4 is not set # CONFIG_ARCH_CHIP_STM32L5 is not set # CONFIG_ARCH_CHIP_STR71X is not set # CONFIG_ARCH_CHIP_TMS570 is not set # CONFIG_ARCH_CHIP_TIVA is not set # CONFIG_ARCH_CHIP_XMC4 is not set # CONFIG_ARCH_CHIP_CXD56XX is not set # CONFIG_ARCH_CHIP_ARM_CUSTOM is not set # CONFIG_ARCH_ARM7TDMI is not set # CONFIG_ARCH_ARM920T is not set # CONFIG_ARCH_ARM926EJS is not set # CONFIG_ARCH_ARM1136J is not set # CONFIG_ARCH_ARM1156T2 is not set # CONFIG_ARCH_ARM1176JZ is not set # CONFIG_ARCH_ARMV6M is not set # CONFIG_ARCH_CORTEXM0 is not set CONFIG_ARCH_ARMV7M=y # CONFIG_ARCH_CORTEXM3 is not set CONFIG_ARCH_CORTEXM4=y # CONFIG_ARCH_CORTEXM7 is not set # CONFIG_ARCH_ARMV7A is not set # CONFIG_ARCH_CORTEXA5 is not set # CONFIG_ARCH_CORTEXA7 is not set # CONFIG_ARCH_CORTEXA8 is not set # CONFIG_ARCH_CORTEXA9 is not set # CONFIG_ARCH_ARMV7R is not set # CONFIG_ARCH_CORTEXR4 is not set # CONFIG_ARCH_CORTEXR5 is not set # CONFIG_ARCH_CORTEXR7 is not set # CONFIG_ARCH_ARMV8M is not set # CONFIG_ARCH_CORTEXM23 is not set # CONFIG_ARCH_CORTEXM33 is not set # CONFIG_ARCH_CORTEXM35P is not set CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="nrf52" # CONFIG_ARCH_HAVE_TRUSTZONE is not set # CONFIG_ARM_HAVE_WFE_SEV is not set # CONFIG_ARM_HAVE_FPU_D32 is not set # CONFIG_ARM_HAVE_MPU_UNIFIED is not set CONFIG_ARCH_HAVE_HARDFAULT_DEBUG=y # CONFIG_DEBUG_HARDFAULT_ALERT is not set CONFIG_ARCH_HAVE_MEMFAULT_DEBUG=y # CONFIG_ARM_SEMIHOSTING_SYSLOG is not set # # ARMV7M Configuration Options # # CONFIG_ARMV7M_HAVE_ICACHE is not set # CONFIG_ARMV7M_HAVE_DCACHE is not set # CONFIG_ARMV7M_LAZYFPU is not set # CONFIG_ARMV7M_USEBASEPRI is not set # CONFIG_ARMV7M_HAVE_ITCM is not set # CONFIG_ARMV7M_HAVE_DTCM is not set # CONFIG_ARMV7M_TOOLCHAIN_IARL is not set # CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y # CONFIG_ARMV7M_TOOLCHAIN_CLANGL is not set CONFIG_ARMV7M_HAVE_STACKCHECK=y # CONFIG_ARMV7M_STACKCHECK is not set # CONFIG_ARMV7M_ITMSYSLOG is not set CONFIG_ARMV7M_SYSTICK=y # # NRF52 Configuration Options # # CONFIG_ARCH_CHIP_NRF52832 is not set # CONFIG_ARCH_CHIP_NRF52833 is not set CONFIG_ARCH_CHIP_NRF52840=y CONFIG_ARCH_FAMILY_NRF52=y # CONFIG_NRF52_HAVE_BPROT is not set CONFIG_NRF52_HAVE_ACL=y CONFIG_NRF52_HAVE_UART1=y CONFIG_NRF52_HAVE_PORT1=y CONFIG_NRF52_HAVE_SPI3_MASTER=y CONFIG_NRF52_HAVE_QSPI=y CONFIG_NRF52_HAVE_USBDEV=y CONFIG_NRF52_HAVE_PWM3=y CONFIG_NRF52_HAVE_CRYPTOCELL=y # CONFIG_NRF52_I2C_MASTER is not set # CONFIG_NRF52_SPI_MASTER is not set CONFIG_NRF52_UART=y # CONFIG_NRF52_TIMER is not set # CONFIG_NRF52_PWM is not set # CONFIG_NRF52_RTC is not set # # NRF52 Peripheral Selection # # CONFIG_NRF52_I2C0_MASTER is not set # CONFIG_NRF52_I2C1_MASTER is not set # CONFIG_NRF52_SPI0_MASTER is not set # CONFIG_NRF52_SPI1_MASTER is not set # CONFIG_NRF52_SPI2_MASTER is not set # CONFIG_NRF52_SPI3_MASTER is not set # CONFIG_NRF52_GPIOTE is not set CONFIG_NRF52_UART0=y # CONFIG_NRF52_UART1 is not set # CONFIG_NRF52_RNG is not set # CONFIG_NRF52_QSPI is not set # CONFIG_NRF52_WDT is not set # CONFIG_NRF52_NFCT is not set # CONFIG_NRF52_SAADC is not set # CONFIG_NRF52_TIMER1 is not set # CONFIG_NRF52_TIMER2 is not set # CONFIG_NRF52_TIMER3 is not set # CONFIG_NRF52_TIMER4 is not set # CONFIG_NRF52_PWM0 is not set # CONFIG_NRF52_PWM1 is not set # CONFIG_NRF52_PWM2 is not set # CONFIG_NRF52_PWM3 is not set # CONFIG_NRF52_PPI is not set # CONFIG_NRF52_RTC1 is not set # CONFIG_NRF52_RTC2 is not set # CONFIG_NRF52_I2S is not set # CONFIG_NRF52_USBDEV is not set # CONFIG_NRF52_COMP is not set # # Clock Configuration # # CONFIG_NRF52_HFCLK_XTAL is not set CONFIG_NRF52_USE_LFCLK=y CONFIG_NRF52_LFCLK_XTAL=y # CONFIG_NRF52_LFCLK_RC is not set # CONFIG_NRF52_LFCLK_SYNTH is not set # # System Timer # CONFIG_NRF52_SYSTIMER=y CONFIG_NRF52_SYSTIMER_SYSTICK=y # CONFIG_NRF52_SYSTIMER_RTC is not set # CONFIG_NRF52_DCDC is not set CONFIG_NRF52_FLASH_PREFETCH=y # CONFIG_NRF52_PROGMEM is not set # # GPIO Interrupt Configuration # # # PWM configuration # # CONFIG_NRF52_PWM_MULTICHAN is not set # # SAADC Configuration # # # SPI Configuration # # # I2C Master Configuration # # CONFIG_NRF52_I2C_MASTER_DISABLE_NOSTART is not set CONFIG_NRF52_I2C_MASTER_COPY_BUF_SIZE=4 CONFIG_NRF52_SOFTDEVICE_CONTROLLER=y CONFIG_NRF52_SDC_CLOCK_ACCURACY=250 CONFIG_NRF52_SDC_SLAVE_COUNT=1 CONFIG_NRF52_SDC_ADVERTISING=y CONFIG_NRF52_SDC_SCANNING=y CONFIG_NRF52_SDC_LE_2M_PHY=y CONFIG_NRF52_SDC_LE_CODED_PHY=y CONFIG_NRF52_SDC_DLE=y CONFIG_NRF52_SDC_VERSION=140 CONFIG_ARCH_BOARD="nrf52840-dk" # CONFIG_ARCH_CHIP_CUSTOM is not set # CONFIG_ARCH_TOOLCHAIN_IAR is not set CONFIG_ARCH_TOOLCHAIN_GNU=y # CONFIG_ARCH_GNU_NO_WEAKFUNCTIONS is not set # CONFIG_ARCH_SIZET_LONG is not set # # Architecture Options # # CONFIG_ARCH_NOINTC is not set # CONFIG_ARCH_VECNOTIRQ is not set CONFIG_ARCH_HAVE_IRQTRIGGER=y # CONFIG_ARCH_DMA is not set CONFIG_ARCH_HAVE_IRQPRIO=y # CONFIG_ARCH_ICACHE is not set # CONFIG_ARCH_DCACHE is not set # CONFIG_ARCH_L2CACHE is not set # CONFIG_ARCH_HAVE_ADDRENV is not set # CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set # CONFIG_ARCH_HAVE_MODULE_TEXT is not set # CONFIG_ARCH_HAVE_MULTICPU is not set CONFIG_ARCH_HAVE_VFORK=y CONFIG_ARCH_HAVE_FPU=y # CONFIG_ARCH_HAVE_DPFPU is not set CONFIG_ARCH_HAVE_LAZYFPU=y # CONFIG_ARCH_HAVE_MMU is not set # CONFIG_ARCH_HAVE_MPU is not set # CONFIG_ARCH_NAND_HWECC is not set # CONFIG_ARCH_HAVE_EXTCLK is not set # CONFIG_ARCH_HAVE_POWEROFF is not set # CONFIG_ARCH_HAVE_PROGMEM is not set CONFIG_ARCH_HAVE_RESET=y CONFIG_ARCH_HAVE_TESTSET=y # CONFIG_ARCH_HAVE_FETCHADD is not set # CONFIG_ARCH_HAVE_RTC_SUBSECONDS is not set CONFIG_ARCH_HAVE_SYSCALL_HOOKS=y # CONFIG_ARCH_FPU is not set CONFIG_ARCH_IRQPRIO=y CONFIG_ARCH_STACKDUMP=y # CONFIG_ENDIAN_BIG is not set # CONFIG_ARCH_IDLE_CUSTOM is not set # CONFIG_ARCH_HAVE_RAMFUNCS is not set CONFIG_ARCH_HAVE_RAMVECTORS=y CONFIG_ARCH_RAMVECTORS=y # CONFIG_ARCH_MINIMAL_VECTORTABLE is not set # # Board Settings # CONFIG_BOARD_LOOPSPERMSEC=5500 # # Interrupt options # CONFIG_ARCH_HAVE_INTERRUPTSTACK=y CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y # CONFIG_ARCH_HIPRI_INTERRUPT is not set # # Boot options # # CONFIG_BOOT_RUNFROMEXTSRAM is not set CONFIG_BOOT_RUNFROMFLASH=y # CONFIG_BOOT_RUNFROMISRAM is not set # CONFIG_BOOT_RUNFROMSDRAM is not set # CONFIG_BOOT_COPYTORAM is not set # # Boot Memory Configuration # CONFIG_RAM_START=0x20000000 CONFIG_RAM_SIZE=65535 # CONFIG_ARCH_HAVE_SDRAM is not set # # Board Selection # # CONFIG_ARCH_BOARD_NRF52832_DK is not set # CONFIG_ARCH_BOARD_NRF52_FEATHER is not set # CONFIG_ARCH_BOARD_NRF52832_SPARKFUN is not set # CONFIG_ARCH_BOARD_NRF52832_MDK is not set CONFIG_ARCH_BOARD_NRF52840_DK=y # CONFIG_ARCH_BOARD_NRF52840_DONGLE is not set # CONFIG_ARCH_BOARD_CUSTOM is not set # # Common Board Options # CONFIG_ARCH_HAVE_LEDS=y # CONFIG_ARCH_LEDS is not set CONFIG_ARCH_HAVE_BUTTONS=y # CONFIG_ARCH_BUTTONS is not set # # Board-Specific Options # # CONFIG_NRF52840DK_HIGHPRI is not set # # Board-Common Options # # CONFIG_BOARD_CRASHDUMP is not set CONFIG_LIB_BOARDCTL=y # CONFIG_BOARDCTL_FINALINIT is not set # CONFIG_BOARDCTL_RESET is not set # CONFIG_BOARDCTL_UNIQUEID is not set CONFIG_BOARDCTL_MKRD=y # CONFIG_BOARDCTL_ROMDISK is not set # CONFIG_BOARDCTL_APP_SYMTAB is not set # CONFIG_BOARDCTL_TESTSET is not set # CONFIG_BOARDCTL_IOCTL is not set # # RTOS Features # CONFIG_DISABLE_OS_API=y # CONFIG_DISABLE_POSIX_TIMERS is not set # CONFIG_DISABLE_PTHREAD is not set # CONFIG_DISABLE_MQUEUE is not set # CONFIG_DISABLE_ENVIRON is not set # # Clocks and Timers # CONFIG_ARCH_HAVE_TICKLESS=y # CONFIG_SCHED_TICKLESS is not set CONFIG_USEC_PER_TICK=10000 # CONFIG_SYSTEMTICK_HOOK is not set # CONFIG_SYSTEM_TIME64 is not set # CONFIG_CLOCK_MONOTONIC is not set CONFIG_ARCH_HAVE_TIMEKEEPING=y # CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2018 CONFIG_START_MONTH=3 CONFIG_START_DAY=26 CONFIG_PREALLOC_TIMERS=4 # # Tasks and Scheduling # # CONFIG_SPINLOCK is not set # CONFIG_IRQCHAIN is not set # CONFIG_IRQCOUNT is not set # CONFIG_INIT_NONE is not set CONFIG_INIT_ENTRYPOINT=y # CONFIG_INIT_FILEPATH is not set CONFIG_INIT_ARGS="" CONFIG_USER_ENTRYPOINT="nsh_main" CONFIG_USERMAIN_STACKSIZE=2048 CONFIG_USERMAIN_PRIORITY=100 CONFIG_RR_INTERVAL=200 # CONFIG_SCHED_SPORADIC is not set CONFIG_TASK_NAME_SIZE=0 CONFIG_MAX_TASKS=16 # CONFIG_SCHED_HAVE_PARENT is not set CONFIG_SCHED_WAITPID=y # CONFIG_SCHED_USER_IDENTITY is not set # # Pthread Options # CONFIG_PTHREAD_MUTEX_TYPES=y CONFIG_PTHREAD_MUTEX_ROBUST=y # CONFIG_PTHREAD_MUTEX_UNSAFE is not set # CONFIG_PTHREAD_MUTEX_BOTH is not set # CONFIG_PTHREAD_CLEANUP is not set # CONFIG_CANCELLATION_POINTS is not set # # Performance Monitoring # # CONFIG_SCHED_SUSPENDSCHEDULER is not set # CONFIG_SCHED_RESUMESCHEDULER is not set # CONFIG_SCHED_IRQMONITOR is not set # CONFIG_SCHED_CRITMONITOR is not set # CONFIG_SCHED_CPULOAD is not set # CONFIG_SCHED_INSTRUMENTATION is not set # # Files and I/O # CONFIG_DEV_CONSOLE=y # CONFIG_FDCLONE_DISABLE is not set # CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y CONFIG_NFILE_DESCRIPTORS_PER_BLOCK=8 CONFIG_FILE_STREAM=y CONFIG_NAME_MAX=32 CONFIG_PATH_MAX=256 # CONFIG_PRIORITY_INHERITANCE is not set # # RTOS hooks # # CONFIG_BOARD_EARLY_INITIALIZE is not set # CONFIG_BOARD_LATE_INITIALIZE is not set # CONFIG_SCHED_STARTHOOK is not set # CONFIG_SCHED_ATEXIT is not set # CONFIG_SCHED_ONEXIT is not set # # Signal Configuration # CONFIG_SIG_PREALLOC_IRQ_ACTIONS=8 CONFIG_SIG_EVTHREAD=y CONFIG_SIG_DEFAULT=y # # Per-signal Default Actions # # CONFIG_SIG_SIGUSR1_ACTION is not set # CONFIG_SIG_SIGUSR2_ACTION is not set # CONFIG_SIG_SIGALRM_ACTION is not set CONFIG_SIG_SIGSTOP_ACTION=y CONFIG_SIG_SIGKILL_ACTION=y CONFIG_SIG_SIGPIPE_ACTION=y # # Signal Numbers # # # Standard Signal Numbers # CONFIG_SIG_SIGUSR1=1 CONFIG_SIG_SIGUSR2=2 CONFIG_SIG_SIGALRM=3 CONFIG_SIG_STOP=6 CONFIG_SIG_TSTP=7 CONFIG_SIG_CONT=8 CONFIG_SIG_KILL=9 CONFIG_SIG_INT=10 CONFIG_SIG_QUIT=11 CONFIG_SIG_TERM=12 CONFIG_SIG_PIPE=13 # # Non-standard Signal Numbers # CONFIG_SIG_SIGCONDTIMEDOUT=16 CONFIG_SIG_SIGWORK=17 # # POSIX Message Queue Options # CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_PREALLOC_MQ_IRQ_MSGS=8 CONFIG_MQ_MAXMSGSIZE=32 # CONFIG_MODULE is not set # # Work queue support # CONFIG_SCHED_WORKQUEUE=y # CONFIG_WQUEUE_NOTIFIER is not set CONFIG_SCHED_HPWORK=y CONFIG_SCHED_HPNTHREADS=1 CONFIG_SCHED_HPWORKPRIORITY=224 CONFIG_SCHED_HPWORKSTACKSIZE=2048 CONFIG_SCHED_LPWORK=y CONFIG_SCHED_LPNTHREADS=1 CONFIG_SCHED_LPWORKPRIORITY=100 CONFIG_SCHED_LPWORKSTACKSIZE=2048 # # Stack and heap information # CONFIG_DEFAULT_TASK_STACKSIZE=2048 CONFIG_IDLETHREAD_STACKSIZE=1024 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=2048 # CONFIG_LIB_SYSCALL is not set # # Device Drivers # # CONFIG_DEV_SIMPLE_ADDRENV is not set CONFIG_DEV_NULL=y # CONFIG_DEV_ZERO is not set CONFIG_DRVR_MKRD=y CONFIG_ARCH_HAVE_RDWR_MEM_CPU_RUN=y # CONFIG_LWL_CONSOLE is not set # # Buffering # # CONFIG_DRVR_WRITEBUFFER is not set # CONFIG_DRVR_READAHEAD is not set # CONFIG_SPECIFIC_DRIVERS is not set # CONFIG_DEV_URANDOM is not set # CONFIG_DEV_LOOP is not set # CONFIG_ARCH_HAVE_CAN_ERRORS is not set # CONFIG_CAN is not set # CONFIG_ARCH_HAVE_I2CRESET is not set # CONFIG_I2C is not set # CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set # CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set CONFIG_ARCH_HAVE_SPI_BITORDER=y # CONFIG_SPI is not set # CONFIG_I2S is not set # # Timer Driver Support # # CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set CONFIG_ARCH_HAVE_PWM_MULTICHAN=y # CONFIG_PWM is not set CONFIG_TIMER=y CONFIG_TIMER_ARCH=y # CONFIG_ONESHOT is not set # CONFIG_RTC is not set # CONFIG_WATCHDOG is not set # CONFIG_ANALOG is not set # CONFIG_DRIVERS_AUDIO is not set # CONFIG_FB_CMAP is not set # CONFIG_FB_TRANSPARENCY is not set # CONFIG_FB_UPDATE is not set # CONFIG_FB_SYNC is not set # CONFIG_FB_OVERLAY is not set # CONFIG_DRIVERS_VIDEO is not set CONFIG_BCH=y # CONFIG_INPUT is not set # # IO Expander/GPIO Support # # CONFIG_IOEXPANDER is not set # CONFIG_DEV_GPIO is not set # # LCD Driver Support # # CONFIG_LCD is not set # # Character/Segment LCD Devices # # CONFIG_SLCD is not set # # Other LCD-related Devices # # CONFIG_LCD_OTHER is not set # # LED Support # # CONFIG_USERLED is not set # CONFIG_LEDS_APA102 is not set # CONFIG_LEDS_MAX7219 is not set # CONFIG_RGBLED is not set # CONFIG_PCA9635PW is not set # CONFIG_NCP5623C is not set # CONFIG_WS2812 is not set # CONFIG_ARCH_HAVE_SDIO is not set # CONFIG_ARCH_HAVE_SDIOWAIT_WRCOMPLETE is not set # CONFIG_ARCH_HAVE_SDIO_PREFLIGHT is not set # CONFIG_MMCSD is not set # CONFIG_MODEM is not set # CONFIG_MTD is not set # CONFIG_EEPROM is not set # CONFIG_EFUSE is not set CONFIG_NETDEVICES=y # # General Ethernet MAC Driver Options # # CONFIG_NETDEV_TELNET is not set # # External Ethernet MAC Device Support # # CONFIG_NET_DM90x0 is not set # CONFIG_ENC28J60 is not set # CONFIG_ENCX24J600 is not set # CONFIG_NET_FTMAC100 is not set # CONFIG_NET_LAN91C111 is not set # CONFIG_PIPES is not set # CONFIG_PM is not set # CONFIG_DRIVERS_POWERLED is not set # CONFIG_DRIVERS_SMPS is not set # CONFIG_POWER is not set # CONFIG_SENSORS is not set CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y CONFIG_SERIAL=y # CONFIG_SERIAL_REMOVABLE is not set CONFIG_SERIAL_CONSOLE=y # CONFIG_16550_UART is not set # CONFIG_OTHER_UART_SERIALDRIVER is not set CONFIG_MCU_SERIAL=y CONFIG_STANDARD_SERIAL=y CONFIG_SERIAL_NPOLLWAITERS=4 # CONFIG_SERIAL_IFLOWCONTROL is not set # CONFIG_SERIAL_RS485CONTROL is not set # CONFIG_SERIAL_OFLOWCONTROL is not set # CONFIG_SERIAL_TXDMA is not set # CONFIG_SERIAL_RXDMA is not set # CONFIG_SERIAL_TERMIOS is not set CONFIG_UART0_SERIAL_CONSOLE=y # CONFIG_OTHER_SERIAL_CONSOLE is not set # CONFIG_NO_SERIAL_CONSOLE is not set # CONFIG_UART_SERIALDRIVER is not set CONFIG_UART0_SERIALDRIVER=y # CONFIG_UART1_SERIALDRIVER is not set # CONFIG_UART2_SERIALDRIVER is not set # CONFIG_UART3_SERIALDRIVER is not set # CONFIG_UART4_SERIALDRIVER is not set # CONFIG_UART5_SERIALDRIVER is not set # CONFIG_UART6_SERIALDRIVER is not set # CONFIG_UART7_SERIALDRIVER is not set # CONFIG_UART8_SERIALDRIVER is not set # # UART0 Configuration # CONFIG_UART0_RXBUFSIZE=256 CONFIG_UART0_TXBUFSIZE=256 CONFIG_UART0_BAUD=115200 CONFIG_UART0_BITS=8 CONFIG_UART0_PARITY=0 CONFIG_UART0_2STOP=0 # CONFIG_UART0_IFLOWCONTROL is not set # CONFIG_UART0_OFLOWCONTROL is not set # CONFIG_UART0_RXDMA is not set # CONFIG_UART0_TXDMA is not set # CONFIG_LPUART_SERIALDRIVER is not set # CONFIG_LPUART0_SERIALDRIVER is not set # CONFIG_LPUART1_SERIALDRIVER is not set # CONFIG_LPUART2_SERIALDRIVER is not set # CONFIG_LPUART3_SERIALDRIVER is not set # CONFIG_LPUART4_SERIALDRIVER is not set # CONFIG_LPUART5_SERIALDRIVER is not set # CONFIG_LPUART6_SERIALDRIVER is not set # CONFIG_LPUART7_SERIALDRIVER is not set # CONFIG_LPUART8_SERIALDRIVER is not set # CONFIG_USART0_SERIALDRIVER is not set # CONFIG_USART1_SERIALDRIVER is not set # CONFIG_USART2_SERIALDRIVER is not set # CONFIG_USART3_SERIALDRIVER is not set # CONFIG_USART4_SERIALDRIVER is not set # CONFIG_USART5_SERIALDRIVER is not set # CONFIG_USART6_SERIALDRIVER is not set # CONFIG_USART7_SERIALDRIVER is not set # CONFIG_USART8_SERIALDRIVER is not set # CONFIG_USART9_SERIALDRIVER is not set # CONFIG_SCI0_SERIALDRIVER is not set # CONFIG_SCI1_SERIALDRIVER is not set # CONFIG_SCI2_SERIALDRIVER is not set # CONFIG_SCI3_SERIALDRIVER is not set # CONFIG_SCI4_SERIALDRIVER is not set # CONFIG_SCI5_SERIALDRIVER is not set # CONFIG_SCI6_SERIALDRIVER is not set # CONFIG_SCI7_SERIALDRIVER is not set # CONFIG_SCI8_SERIALDRIVER is not set # CONFIG_SCI9_SERIALDRIVER is not set # CONFIG_SCI10_SERIALDRIVER is not set # CONFIG_SCI11_SERIALDRIVER is not set # CONFIG_SCI12_SERIALDRIVER is not set # CONFIG_PSEUDOTERM is not set # CONFIG_USBDEV is not set # CONFIG_USBHOST_HAVE_ASYNCH is not set # CONFIG_USBHOST is not set # CONFIG_USBMISC is not set # CONFIG_HAVE_USBTRACE is not set CONFIG_DRIVERS_WIRELESS=y # CONFIG_WL_CC1101 is not set # CONFIG_WL_GS2200M is not set # CONFIG_WL_SPIRIT is not set # CONFIG_SPIRIT_NETDEV is not set # CONFIG_DRIVERS_IEEE802154 is not set # CONFIG_DRIVERS_IEEE80211 is not set CONFIG_DRIVERS_BLUETOOTH=y CONFIG_BLUETOOTH_UART=y CONFIG_BLUETOOTH_UART_GENERIC=y # CONFIG_BLUETOOTH_UART_SHIM is not set # CONFIG_BLUETOOTH_BCM4343X is not set CONFIG_BLUETOOTH_UART_OTHER=y # CONFIG_BLUETOOTH_NULL is not set # CONFIG_DRIVERS_LPWAN is not set # CONFIG_WL_NRF24L01 is not set # CONFIG_DRIVERS_CONTACTLESS is not set # CONFIG_1WIRE is not set # # System Logging # # CONFIG_ARCH_SYSLOG is not set CONFIG_SYSLOG_MAX_CHANNELS=1 # CONFIG_RAMLOG is not set # CONFIG_SYSLOG_BUFFER is not set # CONFIG_SYSLOG_INTBUFFER is not set # CONFIG_SYSLOG_TIMESTAMP is not set # CONFIG_SYSLOG_PRIORITY is not set # CONFIG_SYSLOG_PROCESS_NAME is not set # CONFIG_SYSLOG_PROCESSID is not set # CONFIG_SYSLOG_PREFIX is not set # CONFIG_SYSLOG_COLOR_OUTPUT is not set # CONFIG_SYSLOG_CHAR is not set # CONFIG_SYSLOG_CONSOLE is not set CONFIG_SYSLOG_DEFAULT=y # CONFIG_SYSLOG_FILE is not set # CONFIG_CONSOLE_SYSLOG is not set # CONFIG_SYSLOG_CHARDEV is not set # CONFIG_DRIVERS_RF is not set # CONFIG_DRIVERS_RC is not set # CONFIG_MOTOR is not set # # Networking Support # CONFIG_ARCH_HAVE_NET=y # CONFIG_ARCH_HAVE_PHY is not set # CONFIG_ARCH_PHY_INTERRUPT is not set # CONFIG_ARCH_PHY_POLLED is not set # CONFIG_ARCH_HAVE_NETDEV_STATISTICS is not set # CONFIG_NET_WRITE_BUFFERS is not set CONFIG_NET_READAHEAD=y # CONFIG_NET_MCASTGROUP is not set CONFIG_NET=y # CONFIG_NET_PROMISCUOUS is not set # # Driver buffer configuration # CONFIG_NET_ETH_PKTSIZE=590 CONFIG_NET_GUARDSIZE=2 # # Link layer support # CONFIG_NET_ETHERNET=y # CONFIG_NET_LOOPBACK is not set # CONFIG_NET_SLIP is not set # CONFIG_NET_TUN is not set CONFIG_NETDEV_LATEINIT=y # # Network Device Operations # CONFIG_NETDEV_IOCTL=y # CONFIG_NETDEV_PHY_IOCTL is not set # CONFIG_NETDEV_WIRELESS_IOCTL is not set # CONFIG_NETDEV_IFINDEX is not set # CONFIG_NETDOWN_NOTIFIER is not set # # Internet Protocol Selection # CONFIG_NET_IPv4=y # CONFIG_NET_IPv6 is not set # CONFIG_NET_IPFORWARD is not set # # Socket Support # CONFIG_NET_NACTIVESOCKETS=16 # CONFIG_NET_SOCKOPTS is not set # CONFIG_NET_TCPPROTO_OPTIONS is not set # CONFIG_NET_UDPPROTO_OPTIONS is not set # CONFIG_NET_CANPROTO_OPTIONS is not set # # Raw Socket Support # # CONFIG_NET_PKT is not set # # Unix Domain Socket Support # # CONFIG_NET_LOCAL is not set # # Rpmsg Socket Support # # CONFIG_NET_RPMSG is not set # # SocketCAN Support # # CONFIG_NET_CAN is not set # # Netlink Socket Support # # CONFIG_NET_NETLINK is not set # # TCP/IP Networking # CONFIG_NET_TCP=y # CONFIG_NET_TCP_NO_STACK is not set # CONFIG_NET_TCP_DELAYED_ACK is not set # CONFIG_NET_TCP_KEEPALIVE is not set # CONFIG_NET_TCPURGDATA is not set CONFIG_NET_TCP_CONNS=8 CONFIG_NET_TCP_NPOLLWAITERS=1 CONFIG_NET_TCP_RTO=3 CONFIG_NET_TCP_WAIT_TIMEOUT=120 CONFIG_NET_MAX_LISTENPORTS=20 CONFIG_NET_TCP_FAST_RETRANSMIT_WATERMARK=3 # CONFIG_NET_TCP_NOTIFIER is not set # CONFIG_NET_TCP_WRITE_BUFFERS is not set # CONFIG_NET_TCPBACKLOG is not set # CONFIG_NET_TCP_SPLIT is not set # CONFIG_NET_SENDFILE is not set # # UDP Networking # CONFIG_NET_UDP=y # CONFIG_NET_UDP_NO_STACK is not set # CONFIG_NET_BROADCAST is not set # CONFIG_NET_UDP_BINDTODEVICE is not set # CONFIG_NET_UDP_CHECKSUMS is not set CONFIG_NET_UDP_CONNS=8 CONFIG_NET_UDP_NPOLLWAITERS=1 # CONFIG_NET_UDP_WRITE_BUFFERS is not set # CONFIG_NET_UDP_NOTIFIER is not set # # Bluetooth socket support # CONFIG_NET_BLUETOOTH=y CONFIG_NET_BLUETOOTH_NCONNS=4 CONFIG_NET_BLUETOOTH_NCONTAINERS=8 CONFIG_NET_BLUETOOTH_BACKLOG=8 # # IEEE 802.15.4 socket support # # # ICMP Networking Support # # CONFIG_NET_ICMP is not set # CONFIG_NET_ICMP_NO_STACK is not set # CONFIG_NET_IGMP is not set # # ARP Configuration # CONFIG_NET_ARP=y CONFIG_NET_ARPTAB_SIZE=16 CONFIG_NET_ARP_MAXAGE=120 # CONFIG_NET_ARP_IPIN is not set # CONFIG_NET_ARP_SEND is not set # # User-space networking stack API # # CONFIG_NET_USRSOCK is not set # CONFIG_NET_ARCH_INCR32 is not set # CONFIG_NET_ARCH_CHKSUM is not set # CONFIG_NET_STATISTICS is not set # CONFIG_NET_HAVE_STAR is not set # # Network Topologies # # # Routing Table Configuration # # CONFIG_NET_ROUTE is not set # # Crypto API # # CONFIG_CRYPTO is not set # # File Systems # # # File system configuration # # CONFIG_DISABLE_MOUNTPOINT is not set # CONFIG_FS_AUTOMOUNTER is not set CONFIG_FS_NEPOLL_DESCRIPTORS=8 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set # CONFIG_PSEUDOFS_SOFTLINKS is not set # CONFIG_EVENT_FD is not set # CONFIG_FS_AIO is not set # CONFIG_FS_NAMED_SEMAPHORES is not set CONFIG_FS_MQUEUE_MPATH="/var/mqueue" CONFIG_FS_MQUEUE_NPOLLWAITERS=4 # CONFIG_FS_RAMMAP is not set # # Partition Table # # CONFIG_PTABLE_PARTITION is not set CONFIG_FS_FAT=y CONFIG_FAT_LCNAMES=y CONFIG_FAT_LFN=y CONFIG_FAT_MAXFNAME=32 # CONFIG_FAT_LFN_ALIAS_HASH is not set # CONFIG_FAT_LFN_UTF8 is not set CONFIG_FAT_LFN_ALIAS_TRAILCHARS=0 # CONFIG_FS_FATTIME is not set # CONFIG_FAT_FORCE_INDIRECT is not set # CONFIG_FAT_DMAMEMORY is not set # CONFIG_FAT_DIRECT_RETRY is not set # CONFIG_NFS is not set # CONFIG_FS_NXFFS is not set # CONFIG_FS_ROMFS is not set # CONFIG_FS_CROMFS is not set # CONFIG_FS_TMPFS is not set # CONFIG_FS_SMARTFS is not set # CONFIG_FS_BINFS is not set CONFIG_FS_PROCFS=y # CONFIG_FS_PROCFS_REGISTER is not set # # Exclude individual procfs entries # # CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set CONFIG_FS_PROCFS_EXCLUDE_ENVIRON=y # CONFIG_FS_PROCFS_EXCLUDE_BLOCKS is not set # CONFIG_FS_PROCFS_EXCLUDE_MOUNT is not set # CONFIG_FS_PROCFS_EXCLUDE_USAGE is not set # CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set # CONFIG_FS_PROCFS_EXCLUDE_VERSION is not set # CONFIG_FS_PROCFS_EXCLUDE_MEMINFO is not set # CONFIG_FS_PROCFS_EXCLUDE_IOBINFO is not set # CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set # CONFIG_FS_PROCFS_EXCLUDE_NET is not set # CONFIG_FS_SPIFFS is not set # CONFIG_FS_LITTLEFS is not set # CONFIG_FS_UNIONFS is not set # CONFIG_FS_HOSTFS is not set # # Graphics Support # # CONFIG_NX is not set # CONFIG_NXFONTS is not set # # Font Cache Pixel Depths # # CONFIG_NXFONTS_DISABLE_1BPP is not set # CONFIG_NXFONTS_DISABLE_2BPP is not set # CONFIG_NXFONTS_DISABLE_4BPP is not set # CONFIG_NXFONTS_DISABLE_8BPP is not set # CONFIG_NXFONTS_DISABLE_16BPP is not set # CONFIG_NXFONTS_DISABLE_24BPP is not set # CONFIG_NXFONTS_DISABLE_32BPP is not set CONFIG_NXFONTS_PACKEDMSFIRST=y # CONFIG_NXGLIB is not set # # Memory Management # CONFIG_MM_DEFAULT_MANAGER=y # CONFIG_MM_CUSTOMIZE_MANAGER is not set # CONFIG_MM_SMALL is not set CONFIG_MM_REGIONS=2 # CONFIG_ARCH_HAVE_HEAP2 is not set # CONFIG_GRAN is not set # CONFIG_MM_FILL_ALLOCATIONS is not set # CONFIG_MM_CIRCBUF is not set # # Common I/O Buffer Support # CONFIG_MM_IOB=y CONFIG_IOB_NBUFFERS=24 CONFIG_IOB_BUFSIZE=196 CONFIG_IOB_NCHAINS=24 CONFIG_IOB_THROTTLE=0 # CONFIG_IOB_NOTIFIER is not set # # Audio Support # # CONFIG_AUDIO is not set # # Video Support # # # Video subsystem # # CONFIG_VIDEO is not set # # Wireless Support # CONFIG_WIRELESS=y CONFIG_WIRELESS_BLUETOOTH=y CONFIG_WIRELESS_BLUETOOTH_HOST=y CONFIG_BLUETOOTH_MAX_CONN=1 CONFIG_BLUETOOTH_MAX_PAIRED=1 CONFIG_BLUETOOTH_MAXSCANDATA=64 CONFIG_BLUETOOTH_MAXSCANRESULT=8 CONFIG_BLUETOOTH_MAXDISCOVER=8 CONFIG_BLUETOOTH_BUFFER_PREALLOC=20 CONFIG_BLUETOOTH_BUFFER_IRQRESERVE=0 # # Kernel Thread Configuration # CONFIG_BLUETOOTH_TXCMD_STACKSIZE=2048 CONFIG_BLUETOOTH_TXCMD_PRIORITY=100 CONFIG_BLUETOOTH_TXCMD_NMSGS=16 CONFIG_BLUETOOTH_TXCONN_STACKSIZE=2048 CONFIG_BLUETOOTH_TXCONN_PRIORITY=100 CONFIG_BLUETOOTH_TXCONN_NMSGS=16 # CONFIG_BLUETOOTH_SMP_SELFTEST is not set # CONFIG_WIRELESS_IEEE802154 is not set # CONFIG_WIRELESS_PKTRADIO is not set # # Binary Loader # # CONFIG_BINFMT_DISABLE is not set # CONFIG_BINFMT_LOADABLE is not set # CONFIG_PIC is not set # CONFIG_NXFLAT is not set # CONFIG_ELF is not set # # Library Routines # # # Standard C Library Options # # # Standard C I/O # # CONFIG_STDIO_DISABLE_BUFFERING is not set CONFIG_STDIO_BUFFER_SIZE=64 CONFIG_STDIO_LINEBUFFER=y CONFIG_NUNGET_CHARS=2 # CONFIG_LIBC_PRINT_LEGACY is not set # CONFIG_LIBC_FLOATINGPOINT is not set CONFIG_LIBC_LONG_LONG=y # CONFIG_LIBC_NUMBERED_ARGS is not set # CONFIG_LIBC_SCANSET is not set # CONFIG_EOL_IS_CR is not set # CONFIG_EOL_IS_LF is not set # CONFIG_EOL_IS_BOTH_CRLF is not set CONFIG_EOL_IS_EITHER_CRLF=y # CONFIG_AUDIO_SRC is not set # CONFIG_LIBM is not set # # Architecture-Specific Support # CONFIG_ARCH_LOWPUTC=y # CONFIG_ARCH_ROMGETC is not set # CONFIG_LIBC_ARCH_MEMCPY is not set # CONFIG_LIBC_ARCH_MEMCMP is not set # CONFIG_LIBC_ARCH_MEMMOVE is not set # CONFIG_LIBC_ARCH_MEMSET is not set # CONFIG_LIBC_ARCH_STRCHR is not set # CONFIG_LIBC_ARCH_STRCMP is not set # CONFIG_LIBC_ARCH_STRCPY is not set # CONFIG_LIBC_ARCH_STRLCPY is not set # CONFIG_LIBC_ARCH_STRNCPY is not set # CONFIG_LIBC_ARCH_STRLEN is not set # CONFIG_LIBC_ARCH_STRNLEN is not set # CONFIG_LIBC_ARCH_ELF is not set # CONFIG_ARMV7M_MEMCPY is not set # CONFIG_MACHINE_OPTS_ARMV7M is not set # CONFIG_LIBM_ARCH_FABSF is not set # CONFIG_LIBM_ARCH_SQRTF is not set # # stdlib Options # CONFIG_LIB_RAND_ORDER=1 CONFIG_LIB_HOMEDIR="/" CONFIG_LIBC_TMPDIR="/tmp" CONFIG_LIBC_MAX_TMPFILE=32 # # Program Execution Options # # CONFIG_LIBC_EXECFUNCS is not set CONFIG_SYMTAB_ORDEREDBYNAME=y # CONFIG_SYMTAB_DECORATED is not set CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 CONFIG_LIB_HOSTNAME="" # # errno Decode Support # # CONFIG_LIBC_STRERROR is not set # CONFIG_LIBC_PERROR_STDOUT is not set # # memcpy/memset Options # # CONFIG_MEMCPY_VIK is not set # CONFIG_MEMSET_OPTSPEED is not set # # pthread support # # CONFIG_LIBC_DLFCN is not set # CONFIG_LIBC_MODLIB is not set # CONFIG_LIBC_GROUP_FILE is not set # CONFIG_LIBC_PASSWD_FILE is not set # CONFIG_LIBC_WCHAR is not set # CONFIG_LIBC_LOCALE is not set # CONFIG_LIBC_LZF is not set # # Time/Time Zone Support # # CONFIG_LIBC_LOCALTIME is not set # # Thread Local Storage (TLS) # # CONFIG_TLS_ALIGNED is not set CONFIG_TLS_NELEM=4 # # Network-Related Options # # CONFIG_LIBC_IPv6_ADDRCONV is not set CONFIG_LIBC_NETDB=y # # NETDB Support # # CONFIG_LIBC_GAISTRERROR is not set CONFIG_NETDB_BUFSIZE=256 CONFIG_NETDB_MAX_IPADDR=1 # CONFIG_NETDB_HOSTFILE is not set # CONFIG_NETDB_DNSCLIENT is not set CONFIG_LIB_SENDFILE_BUFSIZE=512 # # Non-standard Library Support # # CONFIG_LIB_CRC64_FAST is not set # CONFIG_LIB_KBDCODEC is not set # CONFIG_LIB_SLCDCODEC is not set # CONFIG_LIB_ENVPATH is not set # CONFIG_LIB_HEX2BIN is not set CONFIG_BUILTIN=y # # Library Debugging # # CONFIG_EABI_UNWINDER is not set # # Basic CXX Support # # CONFIG_C99_BOOL8 is not set # CONFIG_HAVE_CXX is not set # CONFIG_LIBDSP is not set # # Open Asymmetric Multi Processing # # CONFIG_OPENAMP is not set # # Application Configuration # # # CAN Utilities # # # Examples # # CONFIG_EXAMPLES_ABNTCODI is not set # CONFIG_EXAMPLES_ADXL372_TEST is not set # CONFIG_EXAMPLES_APA102 is not set # CONFIG_EXAMPLES_AUDIO_SOUND is not set # CONFIG_EXAMPLES_BATTERY is not set # CONFIG_EXAMPLES_SIXAXIS is not set # CONFIG_EXAMPLES_BRIDGE is not set # CONFIG_EXAMPLES_CALIB_UDELAY is not set # CONFIG_EXAMPLES_CAMERA is not set # CONFIG_EXAMPLES_CCTYPE is not set # CONFIG_EXAMPLES_CHARGER is not set # CONFIG_EXAMPLES_CHAT is not set # CONFIG_EXAMPLES_CHRONO is not set # CONFIG_EXAMPLES_CONFIGDATA is not set # CONFIG_EXAMPLES_DHCPD is not set # CONFIG_EXAMPLES_DHTXX is not set # CONFIG_EXAMPLES_DISCOVER is not set # CONFIG_EXAMPLES_ESP32_HIMEM is not set # CONFIG_EXAMPLES_FTPC is not set # CONFIG_EXAMPLES_FTPD is not set # CONFIG_EXAMPLES_FXOS8700CQ is not set # CONFIG_EXAMPLES_GPS is not set # CONFIG_EXAMPLES_HDC1008 is not set # CONFIG_EXAMPLES_HELLO is not set # CONFIG_EXAMPLES_HIDKBD is not set # CONFIG_EXAMPLES_IGMP is not set # CONFIG_EXAMPLES_INA219 is not set # CONFIG_EXAMPLES_INA226 is not set # CONFIG_EXAMPLES_LSM330SPI_TEST is not set # CONFIG_EXAMPLES_LVGLDEMO is not set # CONFIG_EXAMPLES_MAX31855 is not set # CONFIG_EXAMPLES_MEDIA is not set # CONFIG_EXAMPLES_MLX90614 is not set # CONFIG_EXAMPLES_MODBUS is not set # CONFIG_EXAMPLES_MODBUSMASTER is not set # CONFIG_EXAMPLES_MOUNT is not set # CONFIG_EXAMPLES_NRF24L01_BTLE is not set # CONFIG_EXAMPLES_NRF24L01TERM is not set # CONFIG_EXAMPLES_NULL is not set # CONFIG_EXAMPLES_NXDEMO is not set # CONFIG_EXAMPLES_OBD2 is not set # CONFIG_EXAMPLES_PCA9635 is not set # CONFIG_EXAMPLES_PDCURSES is not set # CONFIG_EXAMPLES_POSIXSPAWN is not set # CONFIG_EXAMPLES_POWERLED is not set # CONFIG_EXAMPLES_POWERMONITOR is not set # CONFIG_EXAMPLES_PPPD is not set # CONFIG_EXAMPLES_RFID_READUID is not set # CONFIG_EXAMPLES_RGBLED is not set # CONFIG_EXAMPLES_SENDMAIL is not set # CONFIG_EXAMPLES_SERIALBLASTER is not set # CONFIG_EXAMPLES_SERIALRX is not set # CONFIG_EXAMPLES_SERLOOP is not set # CONFIG_EXAMPLES_SLCD is not set # CONFIG_EXAMPLES_SMPS is not set # CONFIG_EXAMPLES_STAT is not set # CONFIG_EXAMPLES_TCPBLASTER is not set # CONFIG_EXAMPLES_TCPECHO is not set # CONFIG_EXAMPLES_TERMIOS is not set # CONFIG_EXAMPLES_TIFF is not set # CONFIG_EXAMPLES_TIMER is not set # CONFIG_EXAMPLES_TOUCHSCREEN is not set # CONFIG_EXAMPLES_UDPBLASTER is not set # CONFIG_EXAMPLES_UDP is not set # CONFIG_EXAMPLES_UID is not set # CONFIG_EXAMPLES_USBSERIAL is not set # CONFIG_EXAMPLES_USERFS is not set # CONFIG_EXAMPLES_WATCHDOG is not set # CONFIG_EXAMPLES_WEBSERVER is not set # CONFIG_EXAMPLES_WGET is not set # CONFIG_EXAMPLES_XBC_TEST is not set # CONFIG_EXAMPLES_XMLRPC is not set # # File System Utilities # # CONFIG_FSUTILS_INIFILE is not set # CONFIG_FSUTILS_INIH is not set # CONFIG_FSUTILS_IPCFG is not set CONFIG_FSUTILS_MKFATFS=y # CONFIG_FSUTILS_PASSWD is not set # # GPS Utilities # # CONFIG_GPSUTILS_MINMEA_LIB is not set # # Graphics Support # # CONFIG_GRAPHICS_FT80X is not set # CONFIG_GRAPHICS_LVGL is not set # # NxWidgets # # # NxWM # # CONFIG_GRAPHICS_PDCURSES is not set # CONFIG_TIFF is not set # # Industrial Applications # # CONFIG_INDUSTRY_ABNT_CODI_LIB is not set # CONFIG_INDUSTRY_FOC is not set # # Interpreters # # CONFIG_INTERPRETERS_BAS is not set # CONFIG_INTERPRETERS_DUKTAPE is not set # CONFIG_INTERPRETERS_FICL is not set # CONFIG_INTERPRETERS_MINIBASIC is not set # CONFIG_INTERPRETERS_QUICKJS is not set # CONFIG_INTERPRETERS_WAMR is not set # CONFIG_INTERPRETERS_WASM3 is not set # # FreeModBus # # CONFIG_MODBUS is not set # # Network Utilities # # CONFIG_NETUTILS_CHAT is not set # CONFIG_NETUTILS_CJSON is not set # CONFIG_NETUTILS_CODECS is not set # CONFIG_NETUTILS_DHCPD is not set # CONFIG_NETUTILS_DISCOVER is not set # CONFIG_NETUTILS_ESP8266 is not set # CONFIG_NETUTILS_FTPC is not set # CONFIG_NETUTILS_FTPD is not set # CONFIG_NETUTILS_IPERF is not set # CONFIG_NETUTILS_LIBCURL4NX is not set # CONFIG_NETUTILS_MQTTC is not set # CONFIG_NETUTILS_NETCAT is not set CONFIG_NETUTILS_NETINIT=y # CONFIG_NETINIT_NETLOCAL is not set CONFIG_NETINIT_THREAD=y CONFIG_NETINIT_THREAD_STACKSIZE=2048 CONFIG_NETINIT_THREAD_PRIORITY=80 # # IP Address Configuration # # # IPv4 Addresses # CONFIG_NETINIT_IPADDR=0x0a000002 CONFIG_NETINIT_DRIPADDR=0x0a000001 CONFIG_NETINIT_NETMASK=0xffffff00 # CONFIG_NETINIT_NOMAC is not set CONFIG_NETUTILS_NETLIB=y # CONFIG_NETUTILS_NETLIB_GENERICURLPARSER is not set # CONFIG_NETUTILS_PPPD is not set # CONFIG_NETUTILS_SMTP is not set # CONFIG_NETUTILS_TELNETC is not set # CONFIG_NETUTILS_TELNETD is not set # CONFIG_NETUTILS_TFTPC is not set # CONFIG_NETUTILS_WEBCLIENT is not set # CONFIG_NETUTILS_WEBSERVER is not set # CONFIG_NETUTILS_XMLRPC is not set # # NSH Library # CONFIG_NSH_LIBRARY=y # CONFIG_NSH_MOTD is not set # # Command Line Configuration # CONFIG_NSH_PROMPT_STRING="nsh> " CONFIG_NSH_READLINE=y # CONFIG_NSH_CLE is not set CONFIG_NSH_LINELEN=64 # CONFIG_NSH_DISABLE_SEMICOLON is not set CONFIG_NSH_QUOTE=y CONFIG_NSH_CMDPARMS=y CONFIG_NSH_MAXARGUMENTS=7 CONFIG_NSH_ARGCAT=y CONFIG_NSH_NESTDEPTH=3 # CONFIG_NSH_DISABLEBG is not set # CONFIG_NSH_BUILTIN_APPS is not set # # Disable Individual commands # # CONFIG_NSH_DISABLE_ARP is not set # CONFIG_NSH_DISABLE_BASENAME is not set # CONFIG_NSH_DISABLE_CAT is not set # CONFIG_NSH_DISABLE_CD is not set # CONFIG_NSH_DISABLE_CP is not set # CONFIG_NSH_DISABLE_CMP is not set CONFIG_NSH_DISABLE_DATE=y # CONFIG_NSH_DISABLE_DD is not set # CONFIG_NSH_DISABLE_DF is not set # CONFIG_NSH_DISABLE_DIRNAME is not set # CONFIG_NSH_DISABLE_ECHO is not set # CONFIG_NSH_DISABLE_ENV is not set # CONFIG_NSH_DISABLE_EXEC is not set # CONFIG_NSH_DISABLE_EXIT is not set # CONFIG_NSH_DISABLE_EXPORT is not set # CONFIG_NSH_DISABLE_FREE is not set # CONFIG_NSH_DISABLE_GET is not set # CONFIG_NSH_DISABLE_HELP is not set # CONFIG_NSH_DISABLE_HEXDUMP is not set # CONFIG_NSH_DISABLE_IFCONFIG is not set CONFIG_NSH_DISABLE_IFUPDOWN=y # CONFIG_NSH_DISABLE_KILL is not set # CONFIG_NSH_DISABLE_LOSETUP is not set CONFIG_NSH_DISABLE_LOSMART=y # CONFIG_NSH_DISABLE_LS is not set CONFIG_NSH_DISABLE_MB=y # CONFIG_NSH_DISABLE_MKDIR is not set # CONFIG_NSH_DISABLE_MKFATFS is not set # CONFIG_NSH_DISABLE_MKRD is not set CONFIG_NSH_DISABLE_MH=y # CONFIG_NSH_DISABLE_MOUNT is not set # CONFIG_NSH_DISABLE_MV is not set CONFIG_NSH_DISABLE_MW=y CONFIG_NSH_DISABLE_PRINTF=y # CONFIG_NSH_DISABLE_PS is not set # CONFIG_NSH_DISABLE_PUT is not set # CONFIG_NSH_DISABLE_PWD is not set # CONFIG_NSH_DISABLE_RM is not set # CONFIG_NSH_DISABLE_RMDIR is not set # CONFIG_NSH_DISABLE_SET is not set # CONFIG_NSH_DISABLE_SOURCE is not set # CONFIG_NSH_DISABLE_SLEEP is not set # CONFIG_NSH_DISABLE_TIME is not set # CONFIG_NSH_DISABLE_TEST is not set # CONFIG_NSH_DISABLE_TELNETD is not set CONFIG_NSH_DISABLE_TRUNCATE=y # CONFIG_NSH_DISABLE_UMOUNT is not set # CONFIG_NSH_DISABLE_UNAME is not set # CONFIG_NSH_DISABLE_UNSET is not set # CONFIG_NSH_DISABLE_USLEEP is not set # CONFIG_NSH_DISABLE_WGET is not set # CONFIG_NSH_DISABLE_XD is not set CONFIG_NSH_MMCSDMINOR=0 # # Configure Command Options # # CONFIG_NSH_VARS is not set # CONFIG_NSH_CMDOPT_DD_STATS is not set CONFIG_NSH_CODECS_BUFSIZE=128 CONFIG_NSH_CMDOPT_HEXDUMP=y CONFIG_NSH_PROC_MOUNTPOINT="/proc" CONFIG_NSH_FILEIOSIZE=512 # # Scripting Support # # CONFIG_NSH_DISABLESCRIPT is not set # CONFIG_NSH_DISABLE_ITEF is not set # CONFIG_NSH_DISABLE_LOOPS is not set # # Console Configuration # CONFIG_NSH_CONSOLE=y # CONFIG_NSH_ALTCONDEV is not set CONFIG_NSH_ARCHINIT=y # # Networking Configuration # CONFIG_NSH_NETINIT=y CONFIG_NSH_WGET_BUFF_SIZE=512 # CONFIG_NSH_LOGIN is not set # CONFIG_NSH_CONSOLE_LOGIN is not set # # Platform-specific Support # # CONFIG_PLATFORM_CONFIGDATA is not set # # System Libraries and NSH Add-Ons # # CONFIG_SYSTEM_ADBD is not set # CONFIG_SYSTEM_ARGTABLE3 is not set # CONFIG_SYSTEM_CLE is not set # CONFIG_SYSTEM_CUTERM is not set # CONFIG_SYSTEM_EMBEDLOG is not set # CONFIG_SYSTEM_HEX2BIN is not set # CONFIG_SYSTEM_HEXED is not set # # libuv async i/o Library # # CONFIG_LIBUV is not set # CONFIG_SYSTEM_NETDB is not set CONFIG_SYSTEM_NSH=y CONFIG_SYSTEM_NSH_PRIORITY=100 CONFIG_SYSTEM_NSH_STACKSIZE=2048 CONFIG_SYSTEM_NSH_PROGNAME="nsh" # CONFIG_SYSTEM_NTPC is not set # CONFIG_SYSTEM_POPEN is not set # CONFIG_SYSTEM_RAMTEST is not set CONFIG_READLINE_HAVE_EXTMATCH=y CONFIG_SYSTEM_READLINE=y CONFIG_READLINE_ECHO=y # CONFIG_READLINE_TABCOMPLETION is not set # CONFIG_READLINE_CMD_HISTORY is not set # CONFIG_SYSTEM_SETLOGMASK is not set # CONFIG_SYSTEM_SYSTEM is not set # CONFIG_SYSTEM_TEE is not set # CONFIG_SYSTEM_TELNET_CHATD is not set # CONFIG_SYSTEM_TELNET_CLIENT is not set # CONFIG_SYSTEM_TERMCURSES is not set # CONFIG_SYSTEM_UBLOXMODEM is not set # CONFIG_SYSTEM_VI is not set # CONFIG_SYSTEM_ZMODEM is not set # # Testing # # CONFIG_TESTING_FATUTF8 is not set # CONFIG_TESTING_FSTEST is not set # CONFIG_TESTING_GETPRIME is not set # CONFIG_TESTING_IRTEST is not set # CONFIG_TESTING_LTP is not set # CONFIG_TESTING_MM is not set # CONFIG_TESTING_NXFFS is not set # CONFIG_TESTING_OSTEST is not set # CONFIG_TESTING_SCANFTEST is not set # CONFIG_TESTING_SENSORTEST is not set # CONFIG_TESTING_SMART is not set # CONFIG_TESTING_SMART_TEST is not set # CONFIG_TESTING_UNITY is not set # # Wireless Libraries and NSH Add-Ons # # # Bluetooth applications # CONFIG_BTSAK=y # # IEEE 802.15.4 applications # # CONFIG_IEEE802154_I8SAK is not set # CONFIG_IEEE802154_LIBMAC is not set # CONFIG_IEEE802154_LIBUTILS is not set # CONFIG_WIRELESS_IWPAN is not set # CONFIG_WIRELESS_WAPI is not set I can se bnep0 nsh> bt bnep0 info btnet_ioctl: cmd=8b38 arg=536911328 btnet_ioctl: ifname: bnep0 Device: bnep0 BDAddr: 00:00:00:00:00:00 Flags: 0000 Free: 20 ACL: 20 SCO: 0 Max: ACL: 24 SCO: 0 MTU: ACL: 70 SCO: 70 Policy: 0 Type: 0 nsh> But when i try to make a scan nsh> bt bnep0 scan start btnet_ioctl: cmd=8b44 arg=536911328 btnet_ioctl: ifname: bnep0 bt_hci_cmd_create: opcode 200b param_len 7 bt_buf_alloc: buf 0x20002c28 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c28 bt_buf_extend: buf 0x20002c28 len 3 bt_buf_extend: buf 0x20002c28 len 7 bt_buf_addref: buf 0x20002c28 (old) ref 1 type 0 bt_hci_cmd_send: opcode 200b len 10 bt_hci_cmd_create: opcode 200c param_len 2 bt_buf_alloc: buf 0x20002c10 type 0 reserve 0 bt_hci_cmd_create: buf 0x20002c10 bt_buf_extend: buf 0x20002c10 len 3 bt_buf_extend: buf 0x20002c10 len 2 bt_buf_addref: buf 0x20002c10 (old) ref 1 type 0 bt_hci_cmd_send_sync: opcode 200c len 5 bt_buf_addref: buf 0x20002c28 (old) ref 2 type 0 hci_tx_kthread: Sending command 200b buf 0x20002c28 to driver bt_hci_send: passing CMD 8203 to softdevice bt_buf_release: buf 0x20002c28 ref 3 type 0 bt_buf_release: Remaining references: 2 on_hci: received CMD_COMPLETE from softdevice (opcode: 8203, status: 0xb) bt_buf_alloc: buf 0x20002bf8 type 1 reserve 1 bt_buf_extend: buf 0x20002bf8 len 6 bt_hci_receive: buf 0x20002bf8 len 6 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002bf8 type 1 len 6 bt_buf_consume: buf 0x20002bf8 len 2 hci_cmd_complete: opcode 200b bt_buf_consume: buf 0x20002bf8 len 3 hci_cmd_complete: Unhandled opcode 200b bt_buf_release: buf 0x20002c28 ref 2 type 0 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002bf8 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002bf8 bt_buf_addref: buf 0x20002c10 (old) ref 2 type 0 hci_tx_kthread: Sending command 200c buf 0x20002c10 to driver bt_hci_send: passing CMD 8204 to softdevice bt_buf_release: buf 0x20002c10 ref 3 type 0 bt_buf_release: Remaining references: 2 on_hci: received CMD_COMPLETE from softdevice (opcode: 8204, status: 0xc) bt_buf_alloc: buf 0x20002bf8 type 1 reserve 1 bt_buf_extend: buf 0x20002bf8 len 6 bt_hci_receive: buf 0x20002bf8 len 6 priority_rx_work: list 0x20002c64 priority_rx_work: buf 0x20002bf8 type 1 len 6 bt_buf_consume: buf 0x20002bf8 len 2 hci_cmd_complete: opcode 200c bt_buf_consume: buf 0x20002bf8 len 3 hci_cmd_complete: Unhandled opcode 200c hci_cmd_done: WARNING: status 18 bt_buf_release: buf 0x20002c10 ref 2 type 0 bt_buf_release: Remaining references: 1 bt_buf_release: buf 0x20002bf8 ref 1 type 1 bt_buf_release: Buffer freed: 0x20002bf8 bt_hci_cmd_send_sync: ERROR: Failed get return parameters bt_buf_release: buf 0x20002c10 ref 1 type 0 bt_buf_release: Buffer freed: 0x20002c10 bt_hci_start_scanning: ERROR: bt_hci_cmd_send_sync failed: -5 btnet_ioctl: Start scan: -5 ERROR: ioctl(SIOCBTSCANSTART) failed: 5 nsh> and nsh> bt bnep0 scan get btnet_ioctl: cmd=8b45 arg=536910860 btnet_ioctl: ifname: bnep0 btnet_scan_result: Scanning? NO btnet_ioctl: Get scan results: 0 Scan result: nsh> Can you give some tip ? (strange that shows HCI messages) Thanks for all!
