Hello, I intend to use a NuttX firmware with a custom bootloader on a STM32F4DISCOVERY board.
The bootloader will be executed on the first available memory block in flash, and the firmware will start from the second block - position 0x08020000. I believe I know what to do regarding linker script. But I don't know if there is anything to be done directly in NuttX source code. I ask this because in a standard STM32 firmware using STM32Cube, there is a FLASH_BASE constant that must be set correctly for the firmware to work correctly. My worry is if there is something similar in NuttX for the board. Best regards, Flavio -- Flavio de Castro Alves Filho flavio.al...@gmail.com Twitter: http://twitter.com/#!/fraviofii LinkedIn profile: www.linkedin.com/in/flaviocastroalves