I hope this is not too much if a newbie/dumb question as I have tried to
research this first.

 

I've been playing with Nuttx on a SAMA5D2-XULT board ahead of porting to my
custom board (SAMA5D27C-5M, actually), especially in regard to USB Host
functionality as that's what's drawn me to NuttX in the first place.

 

USB memory sticks are recognised and I can mount them (not got automount to
work, yet - I'm still learning!; and date/time stamping of files written
doesn't seem to work either) - nice to have things like this work "out of
the box"! 

 

I can also build in Bluetooth support and the demo app, but as far as I can
tell there are no actual Bluetooth host drivers in NuttX to properly support
a detected Bluetooth device. My custom board actually has a SiLabs Bluetooth
module on it (connected to the SAM via UART and proven to work) but I quite
like the idea of just using plug-in Bluetooth devices instead :)

 

I can see the device is detected (it gets powered, and dmesg reports stuff)
but no drivers are loaded as best as I can tell. Is that correct or have I
missed something?

 

Drivers are not my strong point but, if I'm right and a driver will be
needed, is a generic Linux driver a good place to start were I to look to
add/create one to NuttX? Or maybe someone has already done this?

 

 

Thanks,

 

Tim.

 

Reply via email to