Please read the thread: "adxl372_test SPI Configuration" it could help you!
On 12/3/20, Marlar Chan <marlar.c...@ntu.edu.sg> wrote: > Dear Nuttx, > > Currently I am testing with STM32F429_waveshare. It is same with > STM32F429_disco, so I add the new board into Nuttx. > Now, I'm trying to test with adxl372 sensor with the board. I use SPI so in > menu config, I enable SPI driver and sensor driver. But in nsh, it cannot > show the usb dev. I use with the command: ls /dev. I also tried enable > stm32_adxl345. For adxl372, I'm not clear STM32F429_disco use SPI 5 or SPI1. > I found it use SPI5 for MEMS in the code. However, even I tried with both, > both, it cannot show sensor device in nsh. Can you suggest me anything! > > > Thank you, > Best Regards, > Marlar > > ________________________________ > > CONFIDENTIALITY: This email is intended solely for the person(s) named and > may be confidential and/or privileged. If you are not the intended > recipient, please delete it, notify us and do not copy, use, or disclose its > contents. > Towards a sustainable earth: Print only when necessary. Thank you. >
