Hi Greg,
Patch has trivial comment changes only, no functional change.
Best Regards,
Juha Niskanen
From 6cab0ea08b2e5c8b8f5ebe2d893c6e32fffff354 Mon Sep 17 00:00:00 2001
From: Juha Niskanen <juha.niska...@haltian.com>
Date: Fri, 14 Feb 2020 12:55:01 +0200
Subject: [PATCH] Fix typos in comments
---
ReleaseNotes | 2 +-
arch/arm/src/arm/up_head.S | 2 +-
arch/arm/src/arm/up_nommuhead.S | 2 +-
arch/arm/src/armv7-r/arm_head.S | 2 +-
arch/arm/src/cxd56xx/cxd56_allocateheap.c | 2 +-
arch/arm/src/cxd56xx/cxd56_pmic.c | 2 +-
arch/arm/src/cxd56xx/cxd56_usbdev.c | 2 +-
arch/arm/src/imxrt/imxrt_ehci.c | 2 +-
arch/arm/src/kinetis/kinetis_irq.c | 2 +-
arch/arm/src/lpc17xx_40xx/hardware/lpc17_40_lcd.h | 2 +-
arch/arm/src/lpc17xx_40xx/lpc17_40_irq.c | 2 +-
arch/arm/src/lpc214x/lpc214x_head.S | 2 +-
arch/arm/src/lpc2378/lpc23xx_head.S | 2 +-
arch/arm/src/lpc31xx/lpc31_ehci.c | 2 +-
arch/arm/src/lpc31xx/lpc31_esrndx.c | 18 ++----------------
arch/arm/src/lpc31xx/lpc31_ioconfig.h | 2 +-
arch/arm/src/lpc43xx/lpc43_allocateheap.c | 2 +-
arch/arm/src/lpc43xx/lpc43_ehci.c | 2 +-
arch/arm/src/lpc43xx/lpc43_serial.c | 2 +-
arch/arm/src/lpc54xx/hardware/lpc54_lcd.h | 2 +-
arch/arm/src/lpc54xx/lpc54_allocateheap.c | 2 +-
arch/arm/src/sam34/sam_irq.c | 2 +-
arch/arm/src/sama5/sam_ehci.c | 2 +-
arch/arm/src/sama5/sam_spi.c | 2 +-
arch/arm/src/sama5/sam_tsd.c | 2 +-
arch/arm/src/samv7/sam_irq.c | 2 +-
arch/arm/src/stm32/stm32_hrtim.c | 2 +-
arch/arm/src/stm32f7/stm32_irq.c | 2 +-
arch/arm/src/stm32h7/stm32_irq.c | 2 +-
arch/arm/src/str71x/str71x_head.S | 2 +-
arch/arm/src/tiva/common/tiva_irq.c | 2 +-
arch/arm/src/xmc4/xmc4_irq.c | 2 +-
arch/hc/src/m9s12/m9s12_start.S | 6 +++---
arch/mips/src/mips32/up_swint0.c | 2 +-
arch/misoc/src/lm32/lm32_swint.c | 2 +-
arch/misoc/src/minerva/minerva_swint.c | 2 +-
arch/risc-v/src/rv32im/up_swint.c | 2 +-
arch/x86/src/qemu/qemu_head.S | 2 +-
arch/z16/src/z16f/z16f_espi.c | 2 +-
arch/z16/src/z16f/z16f_restoreusercontext.S | 4 ++--
boards/arm/imxrt/imxrt1020-evk/src/imxrt_appinit.c | 2 +-
boards/arm/stm32/clicker2-stm32/src/clicker2-stm32.h | 2 +-
boards/sim/sim/sim/src/sim.h | 4 ++--
boards/sim/sim/sim/src/sim_zoneinfo.c | 4 ++--
drivers/lcd/ili9340.c | 4 ++--
drivers/lcd/ili9341.c | 4 ++--
drivers/modem/altair/altmdm_spi.c | 2 +-
drivers/timers/pcf85263.h | 2 +-
drivers/timers/timer.c | 5 +++--
include/nuttx/nx/nxtypes.h | 6 +++---
include/nuttx/timers/oneshot.h | 2 +-
include/nuttx/timers/timer.h | 11 ++++-------
libs/libc/unistd/lib_getopt.c | 2 +-
libs/libc/zoneinfo/README.txt | 2 +-
net/bluetooth/bluetooth.h | 2 +-
net/bluetooth/bluetooth_container.c | 2 +-
net/ieee802154/ieee802154.h | 2 +-
net/ieee802154/ieee802154_container.c | 2 +-
net/tcp/tcp.h | 2 +-
net/tcp/tcp_finddev.c | 8 ++++----
sched/clock/clock_abstime2ticks.c | 8 +++-----
61 files changed, 81 insertions(+), 99 deletions(-)
diff --git a/ReleaseNotes b/ReleaseNotes
index 59d4810..4fc04f3 100644
--- a/ReleaseNotes
+++ b/ReleaseNotes
@@ -13146,7 +13146,7 @@ Additional new features and extended functionality:
- Fonts: Add support for Tom Thumb small mono-space font. From Alan
Carvalho de Assis.
- Graphics: Separated of font cache from graphics/nxterm. Now in
- libnx/nxfronts where it can be shared with other grapics
+ libnx/nxfronts where it can be shared with other graphics
applications.
* Networking/Network Drivers:
diff --git a/arch/arm/src/arm/up_head.S b/arch/arm/src/arm/up_head.S
index 636bcea..7e354f5 100644
--- a/arch/arm/src/arm/up_head.S
+++ b/arch/arm/src/arm/up_head.S
@@ -635,7 +635,7 @@ __start:
/* Text-section constants:
*
* _sbss is the start of the BSS region (see ld.script)
- * _ebss is the end of the BSS regsion (see ld.script)
+ * _ebss is the end of the BSS region (see ld.script)
*
* The idle task stack starts at the end of BSS and is of size
* CONFIG_IDLETHREAD_STACKSIZE. The heap continues from there until the
diff --git a/arch/arm/src/arm/up_nommuhead.S b/arch/arm/src/arm/up_nommuhead.S
index b5f7ea6..d56e0e1 100644
--- a/arch/arm/src/arm/up_nommuhead.S
+++ b/arch/arm/src/arm/up_nommuhead.S
@@ -151,7 +151,7 @@ __start:
/* Variables:
* _sbss is the start of the BSS region (see ld.script)
- * _ebss is the end of the BSS regsion (see ld.script)
+ * _ebss is the end of the BSS region (see ld.script)
* The idle task stack starts at the end of BSS and is
* of size CONFIG_IDLETHREAD_STACKSIZE. The heap continues
* from there until the end of memory. See g_idle_topstack
diff --git a/arch/arm/src/armv7-r/arm_head.S b/arch/arm/src/armv7-r/arm_head.S
index 090086a..14cda9b 100644
--- a/arch/arm/src/armv7-r/arm_head.S
+++ b/arch/arm/src/armv7-r/arm_head.S
@@ -483,7 +483,7 @@ arm_data_initialize:
/* .text Data:
*
* _sbss is the start of the BSS region (see linker script)
- * _ebss is the end of the BSS regsion (see linker script)
+ * _ebss is the end of the BSS region (see linker script)
*
* Typical Configuration:
* The idle task stack starts at the end of BSS and is of size
diff --git a/arch/arm/src/cxd56xx/cxd56_allocateheap.c
b/arch/arm/src/cxd56xx/cxd56_allocateheap.c
index 606e213..e68f371 100644
--- a/arch/arm/src/cxd56xx/cxd56_allocateheap.c
+++ b/arch/arm/src/cxd56xx/cxd56_allocateheap.c
@@ -60,7 +60,7 @@
****************************************************************************/
/* _sbss is the start of the BSS region (see the linker script) _ebss is the
- * end of the BSS regsion (see the linker script). The idle task stack starts
+ * end of the BSS region (see the linker script). The idle task stack starts
* at the end of BSS and is of size CONFIG_IDLETHREAD_STACKSIZE. The IDLE
* thread is the thread that the system boots on and, eventually, becomes the
* idle, do nothing task that runs only when there is nothing else to run.
diff --git a/arch/arm/src/cxd56xx/cxd56_pmic.c
b/arch/arm/src/cxd56xx/cxd56_pmic.c
index ae6e574..a48dc58 100644
--- a/arch/arm/src/cxd56xx/cxd56_pmic.c
+++ b/arch/arm/src/cxd56xx/cxd56_pmic.c
@@ -1111,7 +1111,7 @@ int cxd56_pmic_getrechargevol(FAR int *mv)
return ret;
}
- /* Convert regsiter value to voltage */
+ /* Convert register value to voltage */
switch (val)
{
diff --git a/arch/arm/src/cxd56xx/cxd56_usbdev.c
b/arch/arm/src/cxd56xx/cxd56_usbdev.c
index 06b9eae..3833758 100644
--- a/arch/arm/src/cxd56xx/cxd56_usbdev.c
+++ b/arch/arm/src/cxd56xx/cxd56_usbdev.c
@@ -77,7 +77,7 @@
* Pre-processor Definitions
****************************************************************************/
-/* TOPREG VBUS regsiter */
+/* TOPREG VBUS register */
#define CLR_EDGE (1 << 9)
#define CLR_EN (1 << 8)
diff --git a/arch/arm/src/imxrt/imxrt_ehci.c b/arch/arm/src/imxrt/imxrt_ehci.c
index a01444d..0401510 100644
--- a/arch/arm/src/imxrt/imxrt_ehci.c
+++ b/arch/arm/src/imxrt/imxrt_ehci.c
@@ -5202,7 +5202,7 @@ FAR struct usbhost_connection_s
*imxrt_ehci_initialize(int controller)
imxrt_putreg(regval, &HCOR->usbcmd);
- /* Start the host controller by setting the RUN bit in the USBCMD regsiter.
*/
+ /* Start the host controller by setting the RUN bit in the USBCMD register.
*/
regval = imxrt_getreg(&HCOR->usbcmd);
regval |= EHCI_USBCMD_RUN;
diff --git a/arch/arm/src/kinetis/kinetis_irq.c
b/arch/arm/src/kinetis/kinetis_irq.c
index 3693dd8..85bfca1 100644
--- a/arch/arm/src/kinetis/kinetis_irq.c
+++ b/arch/arm/src/kinetis/kinetis_irq.c
@@ -338,7 +338,7 @@ void up_irqinitialize(void)
*
* 0 -> 32 interrupt lines, 1 enable register, 8 priority registers
* 1 -> 64 " " " ", 2 enable registers, 16 priority registers
- * 2 -> 96 " " " ", 3 enable regsiters, 24 priority registers
+ * 2 -> 96 " " " ", 3 enable registers, 24 priority registers
* ...
*/
diff --git a/arch/arm/src/lpc17xx_40xx/hardware/lpc17_40_lcd.h
b/arch/arm/src/lpc17xx_40xx/hardware/lpc17_40_lcd.h
index 99cb808..5dba18b 100644
--- a/arch/arm/src/lpc17xx_40xx/hardware/lpc17_40_lcd.h
+++ b/arch/arm/src/lpc17xx_40xx/hardware/lpc17_40_lcd.h
@@ -79,7 +79,7 @@
#define LPC17_40_LCD_CRSR_PAL1_OFFSET (0x0c0c) /* Cursor Palette
register 1 */
#define LPC17_40_LCD_CRSR_XY_OFFSET (0x0c10) /* Cursor XY Position
register */
#define LPC17_40_LCD_CRSR_CLIP_OFFSET (0x0c14) /* Cursor Clip Position
register */
-#define LPC17_40_LCD_CRSR_INTMSK_OFFSET (0x0c20) /* Cursor Interrupt Mask
regsiter */
+#define LPC17_40_LCD_CRSR_INTMSK_OFFSET (0x0c20) /* Cursor Interrupt Mask
register */
#define LPC17_40_LCD_CRSR_INTCLR_OFFSET (0x0c24) /* Cursor Interrupt Clear
register */
#define LPC17_40_LCD_CRSR_INTRAW_OFFSET (0x0c28) /* Cursor Raw Interrupt
Status register */
#define LPC17_40_LCD_CRSR_INTSTAT_OFFSET (0x0c2c) /* Cursor Masked
Interrupt Status register */
diff --git a/arch/arm/src/lpc17xx_40xx/lpc17_40_irq.c
b/arch/arm/src/lpc17xx_40xx/lpc17_40_irq.c
index 474826d..3dc9da3 100644
--- a/arch/arm/src/lpc17xx_40xx/lpc17_40_irq.c
+++ b/arch/arm/src/lpc17xx_40xx/lpc17_40_irq.c
@@ -307,7 +307,7 @@ void up_irqinitialize(void)
*
* 0 -> 32 interrupt lines, 1 enable register, 8 priority registers
* 1 -> 64 " " " ", 2 enable registers, 16 priority registers
- * 2 -> 96 " " " ", 3 enable regsiters, 24 priority registers
+ * 2 -> 96 " " " ", 3 enable registers, 24 priority registers
* ...
*/
diff --git a/arch/arm/src/lpc214x/lpc214x_head.S
b/arch/arm/src/lpc214x/lpc214x_head.S
index 6ac253b..127e5f1 100644
--- a/arch/arm/src/lpc214x/lpc214x_head.S
+++ b/arch/arm/src/lpc214x/lpc214x_head.S
@@ -601,7 +601,7 @@ __start:
/* Variables:
* _sbss is the start of the BSS region (see ld.script)
- * _ebss is the end of the BSS regsion (see ld.script)
+ * _ebss is the end of the BSS region (see ld.script)
* The idle task stack starts at the end of BSS and is
* of size CONFIG_IDLETHREAD_STACKSIZE. The heap continues
* from there until the end of memory. See g_idle_topstack
diff --git a/arch/arm/src/lpc2378/lpc23xx_head.S
b/arch/arm/src/lpc2378/lpc23xx_head.S
index d4648ac..071ed20 100644
--- a/arch/arm/src/lpc2378/lpc23xx_head.S
+++ b/arch/arm/src/lpc2378/lpc23xx_head.S
@@ -202,7 +202,7 @@ __start:
/* Variables:
* _sbss is the start of the BSS region (see ld.script)
- * _ebss is the end of the BSS regsion (see ld.script)
+ * _ebss is the end of the BSS region (see ld.script)
* The idle task stack starts at the end of BSS and is
* of size CONFIG_IDLETHREAD_STACKSIZE. The heap continues
* from there until the end of memory. See g_idle_topstack
diff --git a/arch/arm/src/lpc31xx/lpc31_ehci.c
b/arch/arm/src/lpc31xx/lpc31_ehci.c
index 1c351b3..cc70adb 100644
--- a/arch/arm/src/lpc31xx/lpc31_ehci.c
+++ b/arch/arm/src/lpc31xx/lpc31_ehci.c
@@ -5243,7 +5243,7 @@ FAR struct usbhost_connection_s
*lpc31_ehci_initialize(int controller)
lpc31_putreg(regval, &HCOR->usbcmd);
- /* Start the host controller by setting the RUN bit in the USBCMD regsiter.
*/
+ /* Start the host controller by setting the RUN bit in the USBCMD register.
*/
regval = lpc31_getreg(&HCOR->usbcmd);
regval |= EHCI_USBCMD_RUN;
diff --git a/arch/arm/src/lpc31xx/lpc31_esrndx.c
b/arch/arm/src/lpc31xx/lpc31_esrndx.c
index 55ffd0d..7b87ae8 100644
--- a/arch/arm/src/lpc31xx/lpc31_esrndx.c
+++ b/arch/arm/src/lpc31xx/lpc31_esrndx.c
@@ -48,18 +48,6 @@
#include "lpc31_cgudrvr.h"
/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
-/****************************************************************************
* Public Functions
****************************************************************************/
@@ -71,8 +59,7 @@
* register (or ESRNDX_INVALID if there is no ESR associated with
* this clock ID). Indexing of ESRs differs slightly from the clock
* ID: There are 92 clock IDs but only 89 ESR regisers. There are no
- * ESR registers for :
- *
+ * ESR registers for:
*
* CLKID_I2SRXBCK0 Clock ID 87: I2SRX_BCK0
* CLKID_I2SRXBCK1, Clock ID 88: I2SRX_BCK1
@@ -87,11 +74,10 @@ int lpc31_esrndx(enum lpc31_clockid_e clkid)
{
int esrndx = (int)clkid;
- /* There ar 89 Enable Select Registers (ESR). Indexing for these
+ /* There are 89 Enable Select Registers (ESR). Indexing for these
* registers is identical to indexing to other registers (like PCR),
* except that there are no ESR registers for
*
- *
* CLKID_I2SRXBCK0 Clock ID 87: I2SRX_BCK0
* CLKID_I2SRXBCK1, Clock ID 88: I2SRX_BCK1
*
diff --git a/arch/arm/src/lpc31xx/lpc31_ioconfig.h
b/arch/arm/src/lpc31xx/lpc31_ioconfig.h
index 2cf5e0c..f2154a8 100644
--- a/arch/arm/src/lpc31xx/lpc31_ioconfig.h
+++ b/arch/arm/src/lpc31xx/lpc31_ioconfig.h
@@ -68,7 +68,7 @@
#define LPC31_IOCONFIG_PWM_OFFSET 0x2c0 /* PWM function block */
#define LPC31_IOCONFIG_UART_OFFSET 0x300 /* UART function block */
-/* IOCONFIG register offsets (with respect to any funcion block base address)
*******************/
+/* IOCONFIG register offsets (with respect to any function block base address)
******************/
#define LPC31_IOCONFIG_PINS_OFFSET 0x000 /* WR: RD: Input
pin state */
/* 0x004-0x00c: Reserved */
diff --git a/arch/arm/src/lpc43xx/lpc43_allocateheap.c
b/arch/arm/src/lpc43xx/lpc43_allocateheap.c
index cb01652..c8a76af 100644
--- a/arch/arm/src/lpc43xx/lpc43_allocateheap.c
+++ b/arch/arm/src/lpc43xx/lpc43_allocateheap.c
@@ -325,7 +325,7 @@
****************************************************************************/
/* _sbss is the start of the BSS region (see the linker script) _ebss is the
- * end of the BSS regsion (see the linker script). The idle task stack starts
+ * end of the BSS region (see the linker script). The idle task stack starts
* at the end of BSS and is of size CONFIG_IDLETHREAD_STACKSIZE. The IDLE
* thread is the thread that the system boots on and, eventually, becomes the
* idle, do nothing task that runs only when there is nothing else to run.
diff --git a/arch/arm/src/lpc43xx/lpc43_ehci.c
b/arch/arm/src/lpc43xx/lpc43_ehci.c
index 3c652e8..6242759 100644
--- a/arch/arm/src/lpc43xx/lpc43_ehci.c
+++ b/arch/arm/src/lpc43xx/lpc43_ehci.c
@@ -5057,7 +5057,7 @@ FAR struct usbhost_connection_s
*lpc43_ehci_initialize(int controller)
lpc43_putreg(regval, &HCOR->usbcmd);
- /* Start the host controller by setting the RUN bit in the USBCMD regsiter.
*/
+ /* Start the host controller by setting the RUN bit in the USBCMD register.
*/
regval = lpc43_getreg(&HCOR->usbcmd);
regval |= EHCI_USBCMD_RUN;
diff --git a/arch/arm/src/lpc43xx/lpc43_serial.c
b/arch/arm/src/lpc43xx/lpc43_serial.c
index 8344e1a..c00497c 100644
--- a/arch/arm/src/lpc43xx/lpc43_serial.c
+++ b/arch/arm/src/lpc43xx/lpc43_serial.c
@@ -890,7 +890,7 @@ static inline int up_set_rs485_mode(struct up_dev_s *priv,
#ifdef BOARD_LPC43_UART1_DTRDIR
if (priv->dtrdir)
{
- /* If we ar using DTR for direction then ensure the H/W is
+ /* If we are using DTR for direction then ensure the H/W is
* configured correctly.
*/
diff --git a/arch/arm/src/lpc54xx/hardware/lpc54_lcd.h
b/arch/arm/src/lpc54xx/hardware/lpc54_lcd.h
index 952d198..a8566da 100644
--- a/arch/arm/src/lpc54xx/hardware/lpc54_lcd.h
+++ b/arch/arm/src/lpc54xx/hardware/lpc54_lcd.h
@@ -77,7 +77,7 @@
#define LPC54_LCD_CRSR_PAL1_OFFSET 0x0c0c /* Cursor Palette register 1 */
#define LPC54_LCD_CRSR_XY_OFFSET 0x0c10 /* Cursor XY Position register
*/
#define LPC54_LCD_CRSR_CLIP_OFFSET 0x0c14 /* Cursor Clip Position
register */
-#define LPC54_LCD_CRSR_INTMSK_OFFSET 0x0c20 /* Cursor Interrupt Mask
regsiter */
+#define LPC54_LCD_CRSR_INTMSK_OFFSET 0x0c20 /* Cursor Interrupt Mask
register */
#define LPC54_LCD_CRSR_INTCLR_OFFSET 0x0c24 /* Cursor Interrupt Clear
register */
#define LPC54_LCD_CRSR_INTRAW_OFFSET 0x0c28 /* Cursor Raw Interrupt Status
register */
#define LPC54_LCD_CRSR_INTSTAT_OFFSET 0x0c2c /* Cursor Masked Interrupt
Status register */
diff --git a/arch/arm/src/lpc54xx/lpc54_allocateheap.c
b/arch/arm/src/lpc54xx/lpc54_allocateheap.c
index d75660e..0697754 100644
--- a/arch/arm/src/lpc54xx/lpc54_allocateheap.c
+++ b/arch/arm/src/lpc54xx/lpc54_allocateheap.c
@@ -132,7 +132,7 @@
****************************************************************************/
/* _sbss is the start of the BSS region (see the linker script) _ebss is the
- * end of the BSS regsion (see the linker script). The idle task stack starts
+ * end of the BSS region (see the linker script). The idle task stack starts
* at the end of BSS and is of size CONFIG_IDLETHREAD_STACKSIZE. The IDLE
* thread is the thread that the system boots on and, eventually, becomes the
* idle, do nothing task that runs only when there is nothing else to run.
diff --git a/arch/arm/src/sam34/sam_irq.c b/arch/arm/src/sam34/sam_irq.c
index 371a998..bc277cf 100644
--- a/arch/arm/src/sam34/sam_irq.c
+++ b/arch/arm/src/sam34/sam_irq.c
@@ -369,7 +369,7 @@ void up_irqinitialize(void)
*
* 0 -> 32 interrupt lines, 1 enable register, 8 priority registers
* 1 -> 64 " " " ", 2 enable registers, 16 priority registers
- * 2 -> 96 " " " ", 3 enable regsiters, 24 priority registers
+ * 2 -> 96 " " " ", 3 enable registers, 24 priority registers
* ...
*/
diff --git a/arch/arm/src/sama5/sam_ehci.c b/arch/arm/src/sama5/sam_ehci.c
index 8f933d1..121ae72 100644
--- a/arch/arm/src/sama5/sam_ehci.c
+++ b/arch/arm/src/sama5/sam_ehci.c
@@ -5063,7 +5063,7 @@ FAR struct usbhost_connection_s *sam_ehci_initialize(int
controller)
sam_putreg(regval, &HCOR->usbcmd);
- /* Start the host controller by setting the RUN bit in the USBCMD regsiter.
*/
+ /* Start the host controller by setting the RUN bit in the USBCMD register.
*/
regval = sam_getreg(&HCOR->usbcmd);
regval |= EHCI_USBCMD_RUN;
diff --git a/arch/arm/src/sama5/sam_spi.c b/arch/arm/src/sama5/sam_spi.c
index f6da1fa..c1eb4e6 100644
--- a/arch/arm/src/sama5/sam_spi.c
+++ b/arch/arm/src/sama5/sam_spi.c
@@ -568,7 +568,7 @@ static inline void spi_flush(struct sam_spidev_s *spi)
* Map the chip select number to the bit-set PCS field used in the SPI
* registers. A chip select number is used for indexing and identifying
* chip selects. However, the chip select information is represented by
- * a bit set in the SPI regsisters. This function maps those chip select
+ * a bit set in the SPI registers. This function maps those chip select
* numbers to the correct bit set:
*
* CS Returned Spec Effective
diff --git a/arch/arm/src/sama5/sam_tsd.c b/arch/arm/src/sama5/sam_tsd.c
index 0f44420..fa96185 100644
--- a/arch/arm/src/sama5/sam_tsd.c
+++ b/arch/arm/src/sama5/sam_tsd.c
@@ -420,7 +420,7 @@ errout:
*
* Input Parameters:
* priv - The touchscreen private data structure
- * tsav - The new (shifted) value of the TSAV field of the ADC TSMR regsiter.
+ * tsav - The new (shifted) value of the TSAV field of the ADC TSMR register.
*
* Returned Value:
* None
diff --git a/arch/arm/src/samv7/sam_irq.c b/arch/arm/src/samv7/sam_irq.c
index afc0864..385a863 100644
--- a/arch/arm/src/samv7/sam_irq.c
+++ b/arch/arm/src/samv7/sam_irq.c
@@ -365,7 +365,7 @@ void up_irqinitialize(void)
*
* 0 -> 32 interrupt lines, 1 enable register, 8 priority registers
* 1 -> 64 " " " ", 2 enable registers, 16 priority registers
- * 2 -> 96 " " " ", 3 enable regsiters, 24 priority registers
+ * 2 -> 96 " " " ", 3 enable registers, 24 priority registers
* ...
*/
diff --git a/arch/arm/src/stm32/stm32_hrtim.c b/arch/arm/src/stm32/stm32_hrtim.c
index c5081eb..eea7a78 100644
--- a/arch/arm/src/stm32/stm32_hrtim.c
+++ b/arch/arm/src/stm32/stm32_hrtim.c
@@ -4831,7 +4831,7 @@ static void hrtim_mode_config(FAR struct stm32_hrtim_s
*priv)
*
* Description:
* This function returns not significant bits in counter/capture
- * regsiters for given HRTIM Timer index.
+ * registers for given HRTIM Timer index.
*
* Input Parameters:
* priv - A reference to the HRTIM structure
diff --git a/arch/arm/src/stm32f7/stm32_irq.c b/arch/arm/src/stm32f7/stm32_irq.c
index aea4de9..1bcef4e 100644
--- a/arch/arm/src/stm32f7/stm32_irq.c
+++ b/arch/arm/src/stm32f7/stm32_irq.c
@@ -398,7 +398,7 @@ void up_irqinitialize(void)
*
* 0 -> 32 interrupt lines, 1 enable register, 8 priority registers
* 1 -> 64 " " " ", 2 enable registers, 16 priority registers
- * 2 -> 96 " " " ", 3 enable regsiters, 24 priority registers
+ * 2 -> 96 " " " ", 3 enable registers, 24 priority registers
* ...
*/
diff --git a/arch/arm/src/stm32h7/stm32_irq.c b/arch/arm/src/stm32h7/stm32_irq.c
index b050e3c..9e62f08 100644
--- a/arch/arm/src/stm32h7/stm32_irq.c
+++ b/arch/arm/src/stm32h7/stm32_irq.c
@@ -423,7 +423,7 @@ void up_irqinitialize(void)
*
* 0 -> 32 interrupt lines, 1 enable register, 8 priority registers
* 1 -> 64 " " " ", 2 enable registers, 16 priority registers
- * 2 -> 96 " " " ", 3 enable regsiters, 24 priority registers
+ * 2 -> 96 " " " ", 3 enable registers, 24 priority registers
* ...
*/
diff --git a/arch/arm/src/str71x/str71x_head.S
b/arch/arm/src/str71x/str71x_head.S
index afe9466..45f8cf3 100644
--- a/arch/arm/src/str71x/str71x_head.S
+++ b/arch/arm/src/str71x/str71x_head.S
@@ -598,7 +598,7 @@ dtor_end:
/* Variables:
* _sbss is the start of the BSS region (see ld.script)
- * _ebss is the end of the BSS regsion (see ld.script)
+ * _ebss is the end of the BSS region (see ld.script)
* The idle task stack starts at the end of BSS and is
* of size CONFIG_IDLETHREAD_STACKSIZE. The heap continues
* from there until the end of memory. See g_idle_topstack
diff --git a/arch/arm/src/tiva/common/tiva_irq.c
b/arch/arm/src/tiva/common/tiva_irq.c
index b643604..7cbbe69 100644
--- a/arch/arm/src/tiva/common/tiva_irq.c
+++ b/arch/arm/src/tiva/common/tiva_irq.c
@@ -399,7 +399,7 @@ void up_irqinitialize(void)
*
* 0 -> 32 interrupt lines, 1 enable register, 8 priority registers
* 1 -> 64 " " " ", 2 enable registers, 16 priority registers
- * 2 -> 96 " " " ", 3 enable regsiters, 24 priority registers
+ * 2 -> 96 " " " ", 3 enable registers, 24 priority registers
* ...
*/
diff --git a/arch/arm/src/xmc4/xmc4_irq.c b/arch/arm/src/xmc4/xmc4_irq.c
index 2f16a75..c3580af 100644
--- a/arch/arm/src/xmc4/xmc4_irq.c
+++ b/arch/arm/src/xmc4/xmc4_irq.c
@@ -337,7 +337,7 @@ void up_irqinitialize(void)
*
* 0 -> 32 interrupt lines, 1 enable register, 8 priority registers
* 1 -> 64 " " " ", 2 enable registers, 16 priority registers
- * 2 -> 96 " " " ", 3 enable regsiters, 24 priority registers
+ * 2 -> 96 " " " ", 3 enable registers, 24 priority registers
* ...
*/
diff --git a/arch/hc/src/m9s12/m9s12_start.S b/arch/hc/src/m9s12/m9s12_start.S
index 7f02996..c6ccf65 100644
--- a/arch/hc/src/m9s12/m9s12_start.S
+++ b/arch/hc/src/m9s12/m9s12_start.S
@@ -229,7 +229,7 @@ __start:
/* Variables:
* _sbss is the start of the BSS region (see ld.script)
- * _ebss is the end of the BSS regsion (see ld.script)
+ * _ebss is the end of the BSS region (see ld.script)
* The idle task stack starts at the end of BSS and is
* of size CONFIG_IDLETHREAD_STACKSIZE. The heap continues
* from there until the end of memory. See g_idle_topstack
@@ -257,10 +257,10 @@ __start:
.section .rodata, "a"
/* Variables: _sbss is the start of the BSS region (see ld.script) _ebss is
the end
- * of the BSS regsion (see ld.script). The idle task stack starts at the end
of BSS
+ * of the BSS region (see ld.script). The idle task stack starts at the end of
BSS
* and is of size CONFIG_IDLETHREAD_STACKSIZE. The IDLE thread is the thread
that
* the system boots on and, eventually, becomes the idle, do nothing task that
runs
- * only when there is nothing else to run. The heap continues from there
until the
+ * only when there is nothing else to run. The heap continues from there
until the
* end of memory. See g_idle_topstack below.
*/
diff --git a/arch/mips/src/mips32/up_swint0.c b/arch/mips/src/mips32/up_swint0.c
index 35e65f6..a1e8024 100644
--- a/arch/mips/src/mips32/up_swint0.c
+++ b/arch/mips/src/mips32/up_swint0.c
@@ -113,7 +113,7 @@ static void dispatch_syscall(void)
Get the offset of the stub for this syscall
Load the entry of the stub for this syscall
Call the stub
- Restore regsisters
+ Restore registers
Return from the syscall
);
# endif
diff --git a/arch/misoc/src/lm32/lm32_swint.c b/arch/misoc/src/lm32/lm32_swint.c
index a5970f5..28598b3 100644
--- a/arch/misoc/src/lm32/lm32_swint.c
+++ b/arch/misoc/src/lm32/lm32_swint.c
@@ -112,7 +112,7 @@ static void dispatch_syscall(void)
/* Get the offset of the stub for this syscall */
/* Load the entry of the stub for this syscall */
/* Call the stub */
-/* Restore regsisters */
+/* Restore registers */
/* Return from the syscall */
/* ); */
}
diff --git a/arch/misoc/src/minerva/minerva_swint.c
b/arch/misoc/src/minerva/minerva_swint.c
index f95fa54..298bee4 100644
--- a/arch/misoc/src/minerva/minerva_swint.c
+++ b/arch/misoc/src/minerva/minerva_swint.c
@@ -118,7 +118,7 @@ static void dispatch_syscall(void) naked_function;
/* Call the stub */
-/* Restore regsisters */
+/* Restore registers */
/* Return from the syscall */
}
diff --git a/arch/risc-v/src/rv32im/up_swint.c
b/arch/risc-v/src/rv32im/up_swint.c
index 6f6b559..fab0d4b 100644
--- a/arch/risc-v/src/rv32im/up_swint.c
+++ b/arch/risc-v/src/rv32im/up_swint.c
@@ -110,7 +110,7 @@ static void dispatch_syscall(void)
/* Get the offset of the stub for this syscall */
/* Load the entry of the stub for this syscall */
/* Call the stub */
-/* Restore regsisters */
+/* Restore registers */
/* Return from the syscall */
/* ); */
}
diff --git a/arch/x86/src/qemu/qemu_head.S b/arch/x86/src/qemu/qemu_head.S
index 4e2d04f..16894d5 100644
--- a/arch/x86/src/qemu/qemu_head.S
+++ b/arch/x86/src/qemu/qemu_head.S
@@ -46,7 +46,7 @@
****************************************************************************/
/* Memory Map: _sbss is the start of the BSS region (see ld.script) _ebss is
- * the end of the BSS regsion (see ld.script). The idle task stack starts at
+ * the end of the BSS region (see ld.script). The idle task stack starts at
* the end of BSS and is of size CONFIG_IDLETHREAD_STACKSIZE. The IDLE thread
* is the thread that the system boots on and, eventually, becomes the idle,
* do nothing task that runs only when there is nothing else to run. The
diff --git a/arch/z16/src/z16f/z16f_espi.c b/arch/z16/src/z16f/z16f_espi.c
index e433c4f..db90f6f 100644
--- a/arch/z16/src/z16f/z16f_espi.c
+++ b/arch/z16/src/z16f/z16f_espi.c
@@ -691,7 +691,7 @@ static void spi_exchange(FAR struct spi_dev_s *dev, FAR
const void *txbuffer,
spi_putreg8(priv, data, Z16F_ESPI_DATA);
- /* Wait for the read data to be available in the data regsiter */
+ /* Wait for the read data to be available in the data register. */
while ((spi_getreg8(priv, Z16F_ESPI_STAT) & Z16F_ESPI_STAT_RDRF) == 0);
diff --git a/arch/z16/src/z16f/z16f_restoreusercontext.S
b/arch/z16/src/z16f/z16f_restoreusercontext.S
index a6a91c2..a8ed1c6 100644
--- a/arch/z16/src/z16f/z16f_restoreusercontext.S
+++ b/arch/z16/src/z16f/z16f_restoreusercontext.S
@@ -71,8 +71,8 @@
_up_restoreusercontext:
/* Disable interrupts while we are accessing the TCB's register
- * save structure. The correct interrupt state will be retored by
- * the iret instruction below
+ * save structure. The correct interrupt state will be restored
+ * by the iret instruction below.
*/
di
diff --git a/boards/arm/imxrt/imxrt1020-evk/src/imxrt_appinit.c
b/boards/arm/imxrt/imxrt1020-evk/src/imxrt_appinit.c
index cef2254..d5b71cd 100644
--- a/boards/arm/imxrt/imxrt1020-evk/src/imxrt_appinit.c
+++ b/boards/arm/imxrt/imxrt1020-evk/src/imxrt_appinit.c
@@ -63,7 +63,7 @@
* arg - The boardctl() argument is passed to the board_app_initialize()
* implementation without modification. The argument has no
* meaning to NuttX; the meaning of the argument is a contract
- * between the board-specific initalization logic and the
+ * between the board-specific initialization logic and the
* matching application logic. The value cold be such things as a
* mode enumeration value, a set of DIP switch switch settings, a
* pointer to configuration data read from a file or serial FLASH,
diff --git a/boards/arm/stm32/clicker2-stm32/src/clicker2-stm32.h
b/boards/arm/stm32/clicker2-stm32/src/clicker2-stm32.h
index 9f4388d..07474a4 100644
--- a/boards/arm/stm32/clicker2-stm32/src/clicker2-stm32.h
+++ b/boards/arm/stm32/clicker2-stm32/src/clicker2-stm32.h
@@ -247,7 +247,7 @@
* mikroBUS2 Interrupt: PE14-MB2_INT
*
* I assume that the interrupt lines are active low. No pull-ups are provided
on
- * board so pull-ups ar provided in the pin configurations.
+ * board so pull-ups are provided in the pin configurations.
*/
#define GPIO_MB1_INT
(GPIO_INPUT|GPIO_PULLUP|GPIO_EXTI|GPIO_PORTE|GPIO_PIN10)
diff --git a/boards/sim/sim/sim/src/sim.h b/boards/sim/sim/sim/src/sim.h
index 03eadfb..c172f66 100644
--- a/boards/sim/sim/sim/src/sim.h
+++ b/boards/sim/sim/sim/src/sim.h
@@ -92,11 +92,11 @@ int sim_bringup(void);
* - First, a ROM disk device must be created. This is done by calling
* the function romdisk_register() as described in
* nuttx/include/nuttx/drivers/ramdisk.h. This is an OS level operation
- * and must be done in the board-level logic before your appliction
+ * and must be done in the board-level logic before your application
* starts.
*
* romdisk_register() will create a block driver at /dev/ramN where N
- * is the device minor number that was provdied to romdisk_regsiter.
+ * is the device minor number that was provided to romdisk_register.
*
* - The second step is to mount the file system. This step can be
* performed either in your board configuration logic or by your
diff --git a/boards/sim/sim/sim/src/sim_zoneinfo.c
b/boards/sim/sim/sim/src/sim_zoneinfo.c
index ba7ae3a..bf5f2bd 100644
--- a/boards/sim/sim/sim/src/sim_zoneinfo.c
+++ b/boards/sim/sim/sim/src/sim_zoneinfo.c
@@ -98,11 +98,11 @@
* - First, a ROM disk device must be created. This is done by calling
* the function romdisk_register() as described in
* nuttx/include/nuttx/drivers/ramdisk.h. This is an OS level operation
- * and must be done in the board-level logic before your appliction
+ * and must be done in the board-level logic before your application
* starts.
*
* romdisk_register() will create a block driver at /dev/ramN where N
- * is the device minor number that was provdied to romdisk_regsiter.
+ * is the device minor number that was provided to romdisk_register.
*
* - The second step is to mount the file system. This step can be
* performed either in your board configuration logic or by your
diff --git a/drivers/lcd/ili9340.c b/drivers/lcd/ili9340.c
index 1926f36..b7cf328 100644
--- a/drivers/lcd/ili9340.c
+++ b/drivers/lcd/ili9340.c
@@ -65,7 +65,7 @@
/* This is the generic lcd driver interface for the ili9340 Single Chip LCD
* driver. The driver supports multiple displays, each connected with an own
* ili9340 Single Chip LCD driver. The communication with the LCD single chip
- * driver must be provide by a subdriver accessable trough the ili9340_dev_s
+ * driver must be provide by a subdriver accessable through the ili9340_dev_s
* structure which is platform and MCU interface specific.
*
* Supported MCU interfaces (planed to support)
@@ -89,7 +89,7 @@
* 4-wire 8-bit data serial Interface
*
* Note! RGB interface will not supported by the lcd driver.
- * It should be use with the platform specific RGB grapic controller and the
+ * It should be use with the platform specific RGB graphic controller and the
* nuttx framebuffer interface.
*
*/
diff --git a/drivers/lcd/ili9341.c b/drivers/lcd/ili9341.c
index 858afbc..f46aee0 100644
--- a/drivers/lcd/ili9341.c
+++ b/drivers/lcd/ili9341.c
@@ -65,7 +65,7 @@
/* This is the generic lcd driver interface for the ili9341 Single Chip LCD
* driver. The driver supports multiple displays, each connected with an own
* ili9341 Single Chip LCD driver. The communication with the LCD single chip
- * driver must be provide by a subdriver accessable trough the ili9341_dev_s
+ * driver must be provide by a subdriver accessable through the ili9341_dev_s
* structure which is platform and MCU interface specific.
*
* Supported MCU interfaces (planed to support)
@@ -89,7 +89,7 @@
* 4-wire 8-bit data serial Interface
*
* Note! RGB interface will not supported by the lcd driver.
- * It should be use with the platform specific RGB grapic controller and the
+ * It should be use with the platform specific RGB graphic controller and the
* nuttx framebuffer interface.
*
*/
diff --git a/drivers/modem/altair/altmdm_spi.c
b/drivers/modem/altair/altmdm_spi.c
index df3a72d..11b1cf0 100644
--- a/drivers/modem/altair/altmdm_spi.c
+++ b/drivers/modem/altair/altmdm_spi.c
@@ -1964,7 +1964,7 @@ int altmdm_spi_uninit(FAR struct altmdm_dev_s *priv)
destroy_rxbufffifo(priv);
- /* Uninitalize modem power management driver */
+ /* Uninitialize modem power management driver */
altmdm_pm_uninit(priv);
diff --git a/drivers/timers/pcf85263.h b/drivers/timers/pcf85263.h
index 344a3f2..a598997 100644
--- a/drivers/timers/pcf85263.h
+++ b/drivers/timers/pcf85263.h
@@ -335,7 +335,7 @@
/* Offset register */
-#define PCF85263_CTL_OFFSET 0x24 /* Offset regsiter */
+#define PCF85263_CTL_OFFSET 0x24 /* Offset register */
/* Bits 0-7: Offset value
*/
/* Control registers */
diff --git a/drivers/timers/timer.c b/drivers/timers/timer.c
index 3b68f31..3344300 100644
--- a/drivers/timers/timer.c
+++ b/drivers/timers/timer.c
@@ -587,7 +587,7 @@ void timer_unregister(FAR void *handle)
* Description:
* This function can be called to add a callback into driver-related code
* to handle timer expirations. This is a strictly OS internal interface
- * and may NOT be used by appliction code.
+ * and may NOT be used by application code.
*
* Input Parameters:
* handle - This is the handle that was returned by timer_register()
@@ -595,7 +595,8 @@ void timer_unregister(FAR void *handle)
* arg - Argument to be provided with the callback
*
* Returned Value:
- * None
+ * Zero (OK), if the callback was successfully set, or -ENOSYS if the lower
+ * half driver does not support the operation.
*
****************************************************************************/
diff --git a/include/nuttx/nx/nxtypes.h b/include/nuttx/nx/nxtypes.h
index 86a63e8..8d112e2 100644
--- a/include/nuttx/nx/nxtypes.h
+++ b/include/nuttx/nx/nxtypes.h
@@ -98,7 +98,7 @@ struct nxgl_rect_s
struct nxgl_point_s pt2; /* Lower, right-hand corner */
};
-/* Describes a vector starting at pt1 and extending throug pt2 */
+/* Describes a vector starting at pt1 and extending through pt2 */
struct nxgl_vector_s
{
@@ -108,7 +108,7 @@ struct nxgl_vector_s
/* Describes a run, i.e., a horizontal line. Note that the start/end positions
* have fractional precision. This is necessary for good joining of trapezoids
- * when a more complex shape is decomposed into trapezoids
+ * when a more complex shape is decomposed into trapezoids.
*/
struct nxgl_run_s
@@ -119,7 +119,7 @@ struct nxgl_run_s
};
/* Describes a horizontal trapezoid on the display in terms the run at the
- * top of the trapezoid and the run at the bottom
+ * top of the trapezoid and the run at the bottom.
*/
struct nxgl_trapezoid_s
diff --git a/include/nuttx/timers/oneshot.h b/include/nuttx/timers/oneshot.h
index 6b69a80..4662fbf 100644
--- a/include/nuttx/timers/oneshot.h
+++ b/include/nuttx/timers/oneshot.h
@@ -74,7 +74,7 @@
* Argument: A reference to a struct timespec in which
* the current time will be returned.
*
- * NOTE: _TCIOC(0x0020) througn _TCIOC(0x003f) are reserved for use by the
+ * NOTE: _TCIOC(0x0020) through _TCIOC(0x003f) are reserved for use by the
* oneshot driver to assure that the values are unique. Other timer drivers
* must not use IOCTL commands in this numeric range.
*/
diff --git a/include/nuttx/timers/timer.h b/include/nuttx/timers/timer.h
index 052bcad..62a9ea1 100644
--- a/include/nuttx/timers/timer.h
+++ b/include/nuttx/timers/timer.h
@@ -81,11 +81,7 @@
* WARNING: May change TCIOC_SETTIMEOUT to pass pointer to 64bit nanoseconds
* or timespec structure.
*
- * NOTE: The TCIOC_SETHANDLER ioctl cannot be supported in the kernel build
- * mode. In that case direct callbacks from kernel space into user space is
- * forbidden.
- *
- * NOTE: _TCIOC(0x0001) througn _TCIOC(0x001f) are reserved for use by the
+ * NOTE: _TCIOC(0x0001) through _TCIOC(0x001f) are reserved for use by the
* timer driver to assure that the values are unique. Other timer drivers,
* such as the oneshot timer, must not use IOCTL commands in this numeric
* range.
@@ -278,7 +274,7 @@ void timer_unregister(FAR void *handle);
* Description:
* This function can be called to add a callback into driver-related code
* to handle timer expirations. This is a strictly OS internal interface
- * and may NOT be used by appliction code.
+ * and may NOT be used by application code.
*
* Input Parameters:
* handle - This is the handle that was returned by timer_register()
@@ -286,7 +282,8 @@ void timer_unregister(FAR void *handle);
* arg - Argument provided when the callback is called.
*
* Returned Value:
- * None
+ * Zero (OK), if the callback was successfully set, or -ENOSYS if the lower
+ * half driver does not support the operation.
*
****************************************************************************/
diff --git a/libs/libc/unistd/lib_getopt.c b/libs/libc/unistd/lib_getopt.c
index e52bfd2..0814020 100644
--- a/libs/libc/unistd/lib_getopt.c
+++ b/libs/libc/unistd/lib_getopt.c
@@ -118,7 +118,7 @@ static bool g_binitialized = false;
int getopt(int argc, FAR char *const argv[], FAR const char *optstring)
{
/* Were new argc or argv passed in? This detects misuse of getopt() by
- * applictions that break out of the getopt() loop before getop() returns
+ * applications that break out of the getopt() loop before getop() returns
* -1.
*/
diff --git a/libs/libc/zoneinfo/README.txt b/libs/libc/zoneinfo/README.txt
index 7e0d547..5c7b3bf 100644
--- a/libs/libc/zoneinfo/README.txt
+++ b/libs/libc/zoneinfo/README.txt
@@ -28,7 +28,7 @@ doing this:
starts.
romdisk_register() will create a block driver at /dev/ramN where N
- is the device minor number that was provided to romdisk_regsiter.
+ is the device minor number that was provided to romdisk_register.
- The second step is to mount the file system. This step can be
performed either in your board configuration logic or by your
diff --git a/net/bluetooth/bluetooth.h b/net/bluetooth/bluetooth.h
index f947c5c..29de921 100644
--- a/net/bluetooth/bluetooth.h
+++ b/net/bluetooth/bluetooth.h
@@ -417,7 +417,7 @@ void bluetooth_container_initialize(void);
* Name: bluetooth_container_allocate
*
* Description:
- * The bluetooth_container_allocate function will get a free continer
+ * The bluetooth_container_allocate function will get a free container
* for use by the recvfrom() logic.
*
* This function will first attempt to allocate from the g_free_container
diff --git a/net/bluetooth/bluetooth_container.c
b/net/bluetooth/bluetooth_container.c
index a4a81f1..4c44515 100644
--- a/net/bluetooth/bluetooth_container.c
+++ b/net/bluetooth/bluetooth_container.c
@@ -119,7 +119,7 @@ void bluetooth_container_initialize(void)
* Name: bluetooth_container_allocate
*
* Description:
- * The bluetooth_container_allocate function will get a free continer
+ * The bluetooth_container_allocate function will get a free container
* for use by the recvfrom() logic.
*
* This function will first attempt to allocate from the g_free_container
diff --git a/net/ieee802154/ieee802154.h b/net/ieee802154/ieee802154.h
index b0fec37..f112863 100644
--- a/net/ieee802154/ieee802154.h
+++ b/net/ieee802154/ieee802154.h
@@ -434,7 +434,7 @@ void ieee802154_container_initialize(void);
* Name: ieee802154_container_allocate
*
* Description:
- * The ieee802154_container_allocate function will get a free continer
+ * The ieee802154_container_allocate function will get a free container
* for use by the recvfrom() logic.
*
* This function will first attempt to allocate from the g_free_container
diff --git a/net/ieee802154/ieee802154_container.c
b/net/ieee802154/ieee802154_container.c
index ad8b9b8..2f16b99 100644
--- a/net/ieee802154/ieee802154_container.c
+++ b/net/ieee802154/ieee802154_container.c
@@ -119,7 +119,7 @@ void ieee802154_container_initialize(void)
* Name: ieee802154_container_allocate
*
* Description:
- * The ieee802154_container_allocate function will get a free continer
+ * The ieee802154_container_allocate function will get a free container
* for use by the recvfrom() logic.
*
* This function will first attempt to allocate from the g_free_container
diff --git a/net/tcp/tcp.h b/net/tcp/tcp.h
index 58751e7..39727f8 100644
--- a/net/tcp/tcp.h
+++ b/net/tcp/tcp.h
@@ -442,7 +442,7 @@ int tcp_local_ipv4_device(FAR struct tcp_conn_s *conn);
* on the remotely connected IPv4 address
*
* Input Parameters:
- * conn - TCP connection structure. The remotely conected address, raddr,
+ * conn - TCP connection structure. The remotely connected address, raddr,
* should be set to a non-zero value in this structure.
*
* Returned Value:
diff --git a/net/tcp/tcp_finddev.c b/net/tcp/tcp_finddev.c
index 581ac72..8c6713d 100644
--- a/net/tcp/tcp_finddev.c
+++ b/net/tcp/tcp_finddev.c
@@ -163,7 +163,7 @@ static int tcp_find_ipv6_device(FAR struct tcp_conn_s *conn,
*
* Description:
* Select the network driver to use with the IPv4 TCP transaction based
- * on the locally bound IPv4 address
+ * on the locally bound IPv4 address.
*
* Input Parameters:
* conn - TCP connection structure. The locally bound address, laddr,
@@ -187,10 +187,10 @@ int tcp_local_ipv4_device(FAR struct tcp_conn_s *conn)
*
* Description:
* Select the network driver to use with the IPv4 TCP transaction based
- * on the remotely connected IPv4 address
+ * on the remotely connected IPv4 address.
*
* Input Parameters:
- * conn - TCP connection structure. The remotely conected address, raddr,
+ * conn - TCP connection structure. The remotely connected address, raddr,
* should be set to a non-zero value in this structure.
*
* Returned Value:
@@ -234,7 +234,7 @@ int tcp_local_ipv6_device(FAR struct tcp_conn_s *conn)
*
* Description:
* Select the network driver to use with the IPv6 TCP transaction based
- * on the remotely conected IPv6 address
+ * on the remotely connected IPv6 address.
*
* Input Parameters:
* conn - TCP connection structure. The remotely connected address, raddr,
diff --git a/sched/clock/clock_abstime2ticks.c
b/sched/clock/clock_abstime2ticks.c
index 18bc3ef..3f812c7 100644
--- a/sched/clock/clock_abstime2ticks.c
+++ b/sched/clock/clock_abstime2ticks.c
@@ -86,11 +86,11 @@ static long compare_timespec(FAR const struct timespec *a,
*
* Input Parameters:
* clockid - The timing source to use in the conversion
- * reltime - Convert this absolue time to system clock ticks.
+ * reltime - Convert this absolute time to system clock ticks.
* ticks - Return the converted number of ticks here.
*
* Returned Value:
- * OK on success; A non-zero error number on failure;
+ * OK on success; A non-zero error number on failure
*
* Assumptions:
* Interrupts should be disabled so that the time is not changing during
@@ -131,9 +131,7 @@ int clock_abstime2ticks(clockid_t clockid, FAR const struct
timespec *abstime,
reltime.tv_nsec = (abstime->tv_nsec - currtime.tv_nsec);
reltime.tv_sec = (abstime->tv_sec - currtime.tv_sec);
- /* Check if we were supposed to borrow from the seconds to borrow from the
- * seconds
- */
+ /* Check if we were supposed to borrow from the seconds. */
if (reltime.tv_nsec < 0)
{
--
2.7.4
