You are right I forgot to write this step but thanks again, Im glad to know I am playing safe.
I go to try it again and I will upload logs. regards Daniel García Garrido Infotainment & Software Electronics, ITS and HMI Division daniel.garcia <mailto:daniel.gar...@ctag.com> @ctag.com Centro Tecnológico de Automoción de Galicia (Galician Automotive Technology Centre) Polígono Industrial A Granxa, Parcela 249-250 36400 Porriño (Pontevedra - Spain) *: +34 986 900 300 Fax: +34 986 900 301 <http://www.ctag.com> http://www.ctag.com _____ De: Clark, Joel [mailto:joel.cl...@intel.com] Enviado el: martes, 25 de mayo de 2010 17:02 Para: CTAG / Daniel García CC: Speed, Derek; Branch, Brett Asunto: RE: Russellville board: Compile kernel with ivi config Daniel, Usually the next step is to edit the boot command line to bring the system to single user mode, and then try startx. After that to review the dmesg.log and xorg.log to see what kind of errors are encountered. The folks that do this every day read d...@moblin.org. regards Joel From: CTAG / Daniel García [mailto:daniel.gar...@ctag.com] Sent: Tuesday, May 25, 2010 4:03 AM To: Clark, Joel Subject: Russellville board: Compile kernel with ivi config Hi, Im trying to recompile the kernel in my Russellville board. I downloaded the last kernel-ivi sources from: <http://repo.moblin.org/moblin/development/72ffd2357b99aadec1b4e7e8b358e45c/ archive/20100208/core/source/kernel-2.6.31.6-44.1.moblin2.src.rpm> http://repo.moblin.org/moblin/development/72ffd2357b99aadec1b4e7e8b358e45c/a rchive/20100208/core/source/kernel-2.6.31.6-44.1.moblin2.src.rpm Following instruction from: http://origin-software.intel.com/en-us/articles/compile-moblin-21-kernel-sou rces-with-intel-compiler/ I did: 1. Prepare for build a. su into root. b. Create a ~/.rpmmacros file containing: %_topdir %(echo $HOME)/rpmbuild %_smp_mflags j1 %__arch_install_post /usr/lib/rpm/check-rpaths /usr/lib/rpm/check-buildroot %_default_patch_fuzz 2 #end of file 2. Setup and do initial build. Download the kernel source from a source repository: a. Extract the rpm: $ rpm -ivh kernel-2.6.31.6-44-1.moblin2.src.rpm b. Prepare and do initial build to rpm: $ vim rpmbuild/SPECS/kernel.specs c. Comment lines: #'BuildKernel %make_target %kernel_image netbook' #'BuildKernel %make_target %kernel_image menlow' #'BuildKernel %make_target %kernel_image mrst' #'BuildKernel %make_target %kernel_image mrst-kboot' d. $ rpmbuild -bc --target=i586 kernel.spec 3. Rebuild with gcc: $ cd rpmbuild/BUILD/kernel-2.6.31/linux-2.6.31 $ make clean $ make bzImage $ make modules $ make modules_install $ make install 4. Reboot Is this the right way to compile the kernel applying all patches to Russellvile board? The problem is that X does not run now? Can be a video driver problem? Because X config must be the same from ivi-config? Thanks in advance. Daniel García Garrido Infotainment & Software Electronics, ITS and HMI Division daniel.garcia <mailto:daniel.gar...@ctag.com> @ctag.com Centro Tecnológico de Automoción de Galicia (Galician Automotive Technology Centre) Polígono Industrial A Granxa, Parcela 249-250 36400 Porriño (Pontevedra - Spain) *: +34 986 900 300 Fax: +34 986 900 301 <http://www.ctag.com> http://www.ctag.com _______________________________________________ Moblin dev Mailing List dev@moblin.org To manage or unsubscribe from this mailing list visit: http://lists.moblin.org/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
