My bad. The missing commit info is caused by building from the src code zip which does not contain the git info. So this is not a problem.
+1 (binding) for rc3 Here's what's were verified : * built successfully from the source code * run a sample streaming and a batch job with parallelism=1000 on yarn cluster, with the new scheduler and legacy scheduler, the job runs well (tuned some resource configs to enable the jobs to work well) * killed TMs to trigger failures, the jobs can finally recover from the failures Thanks, Zhu Zhu Zhu Zhu <reed...@gmail.com> 于2020年2月10日周一 上午12:31写道： > The commit info is shown as <unknown> on the web UI and in logs. > Not sure if it's a common issue or just happens to my build only. > > Thanks, > Zhu Zhu > > aihua li <liaihua1...@gmail.com> 于2020年2月9日周日 下午7:42写道： > >> Yes, but the results you see in the Performance Code Speed Center [3] >> skip FLIP-49. >> The results of the default configurations are overwritten by the latest >> results. >> >> > 2020年2月9日 下午5:29，Yu Li <car...@gmail.com> 写道： >> > >> > Thanks for the efforts Aihua! These could definitely improve our RC >> test coverage! >> > >> > Just to confirm, that the stability tests were executed with the same >> test suite for Alibaba production usage, and the e2e performance one was >> executed with the test suite proposed in FLIP-83 [1] and FLINK-14917 [2], >> and the result could also be observed from our performance code-speed >> center [3], right? >> > >> > Thanks. >> > >> > Best Regards, >> > Yu >> > >> > [1] >> https://cwiki.apache.org/confluence/display/FLINK/FLIP-83%3A+Flink+End-to-end+Performance+Testing+Framework >> < >> https://cwiki.apache.org/confluence/display/FLINK/FLIP-83%3A+Flink+End-to-end+Performance+Testing+Framework >> > >> > [2] https://issues.apache.org/jira/browse/FLINK-14917 < >> https://issues.apache.org/jira/browse/FLINK-14917> >> > [3] https://s.apache.org/nglhm <https://s.apache.org/nglhm> >> > >> > On Sun, 9 Feb 2020 at 11:20, aihua li <liaihua1...@gmail.com <mailto: >> liaihua1...@gmail.com>> wrote: >> > +1 (non-binging) >> > >> > I ran stability tests and end-to-end performance tests in branch >> release-1.10.0-rc3,both of them passed. >> > >> > Stability test: It mainly checks The flink job can revover from >> various abnormal situations which concluding disk full, >> > network interruption, zk unable to connect, rpc message timeout, etc. >> > If job can't be recoverd it means test failed. >> > The test passed after running 5 hours. >> > >> > End-to-end performance test: It containes 32 test scenarios which >> designed in FLIP-83. >> > Test results: The performance regressions about 3% from 1.9.1 if uses >> default parameters; >> > The result: >> > >> > if skips FLIP-49 (add parameters:taskmanager.memory.managed.fraction: >> 0,taskmanager.memory.flink.size: 1568m in flink-conf.yaml), >> > the performance improves about 5% from 1.9.1. The result: >> > >> > >> > I confirm it with @Xintong Song < >> https://cwiki.apache.org/confluence/display/~xintongsong> that the >> result makes sense. >> > >> >> 2020年2月8日 上午5:54，Gary Yao <g...@apache.org <mailto:g...@apache.org>> >> 写道： >> >> >> >> Hi everyone, >> >> Please review and vote on the release candidate #3 for the version >> 1.10.0, >> >> as follows: >> >> [ ] +1, Approve the release >> >> [ ] -1, Do not approve the release (please provide specific comments) >> >> >> >> >> >> The complete staging area is available for your review, which includes: >> >> * JIRA release notes [1], >> >> * the official Apache source release and binary convenience releases >> to be >> >> deployed to dist.apache.org <http://dist.apache.org/> [2], which are >> signed with the key with >> >> fingerprint BB137807CEFBE7DD2616556710B12A1F89C115E8 [3], >> >> * all artifacts to be deployed to the Maven Central Repository [4], >> >> * source code tag "release-1.10.0-rc3" [5], >> >> * website pull request listing the new release and adding announcement >> blog >> >> post [6][7]. >> >> >> >> The vote will be open for at least 72 hours. It is adopted by majority >> >> approval, with at least 3 PMC affirmative votes. >> >> >> >> Thanks, >> >> Yu & Gary >> >> >> >> [1] >> >> >> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522&version=12345845 >> < >> https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522&version=12345845 >> > >> >> [2] https://dist.apache.org/repos/dist/dev/flink/flink-1.10.0-rc3/ < >> https://dist.apache.org/repos/dist/dev/flink/flink-1.10.0-rc3/> >> >> [3] https://dist.apache.org/repos/dist/release/flink/KEYS < >> https://dist.apache.org/repos/dist/release/flink/KEYS> >> >> [4] >> https://repository.apache.org/content/repositories/orgapacheflink-1333 < >> https://repository.apache.org/content/repositories/orgapacheflink-1333> >> >> [5] https://github.com/apache/flink/releases/tag/release-1.10.0-rc3 < >> https://github.com/apache/flink/releases/tag/release-1.10.0-rc3> >> >> [6] https://github.com/apache/flink-web/pull/302 < >> https://github.com/apache/flink-web/pull/302> >> >> [7] https://github.com/apache/flink-web/pull/301 < >> https://github.com/apache/flink-web/pull/301> >> > >> >>
