Are you setting an environment variable? I think you should set a Maven property using -Dyadayada=blah
Chris Von meinem Samsung Galaxy Smartphone gesendet. -------- Ursprüngliche Nachricht -------- Von: Greg Dove <greg.d...@gmail.com> Datum: 28.07.16 21:01 (GMT+01:00) An: dev@flex.apache.org Betreff: Re: AW: [FLEXJS, TYPEDEFS] Sound good to me, Chris I used ant super-clean first inside asjs, and then the maven build worked fine. :) The only thing that didn't seem to work for me then for the maven instructions was setting distributionTargetFolder - , I can verify this is valid, I can see the value using echo %distributionTargetFolder% but the folder remained empty despite BUILD SUCCESS on the last command. Is it possible I am missing something else here? On Thu, Jul 28, 2016 at 7:04 PM, Christofer Dutz <christofer.d...@c-ware.de> wrote: > Hi Greg, > > > those are mostly generated sources from the compiler. I could start adding > rat exceptions for all of them, but I don't think thats the way to go. I > think it would be best practice to do a clean-all/mega-clean/wipe-all with > Ant prior to building with maven (whatever goal actually cleans up > everything). > > > Otherwise we'll be stuck adding exceptions for quite some time. > > > Chris > > ________________________________ > Von: Greg Dove <greg.d...@gmail.com> > Gesendet: Mittwoch, 27. Juli 2016 21:55:39 > An: dev@flex.apache.org > Betreff: Re: AW: [FLEXJS, TYPEDEFS] > > Lastly Chris, after running through the maven build steps, I then built > using 'ant all' inside flex-asjs (which completed fine), then started to > follow the maven build sequence again after that. > > Compiler and typedefs seemed fine, but I got a face-full of rat on the > framework build. > > I added: > > <exclude>templates/swfobject/swfobject.js</exclude> > > which let me proceed to the next step. > Then I hit 1134 Unknown Licenses, and that was a little too ambitious for > me to try to figure out right now. > > I've uploaded this rat file (frameworks/target/rat.txt) to dropbox here > [1]. > > Let me know if I can help with any other checks. > cheers > Greg > > 1. https://www.dropbox.com/s/yc515urn6s11gy2/rat.txt?dl=0 > > > > On Thu, Jul 28, 2016 at 6:04 AM, Greg Dove <greg.d...@gmail.com> wrote: > > > Hi Chris, > > > > I wasn't suggesting to remove the rat support, I can see for sure how > that > > would be useful, I just didn't know how (yet) I needed to address the > > issues I had. > > > > I just followed the instructions on a fresh setup and the build completed > > fine for the 3 main parts. > > > > I did see this in the compiler build: > > > > [INFO] --- compiler-build-tools:1.0.0-SNAPSHOT:add-class-annotation > > (add-suppress-rawtypes-unchecked-unused-warnings-annotations) @ compiler > --- > > Adding @SuppressWarnings({"rawtypes", "unchecked", "unused"}) to class: > > > D:\FLEXSDKS\_dev_maven2\flex-falcon\compiler\target\generated-sources\jburg\org\apache\flex\compiler\internal\as\codegen\CmcEmitter.java > > > org.apache.flex.compiler.tools.annotate.AnnotateClass$AnnotateClassDeleteException: > > Error deleting original file at: > > > D:\FLEXSDKS\_dev_maven2\flex-falcon\compiler\target\generated-sources\jburg\org\apache\flex\compiler\internal\as\codegen\CmcEmitter.java > > at > > > org.apache.flex.compiler.tools.annotate.AnnotateClass.processFile(AnnotateClass.java:99) > > at > > > org.apache.flex.compiler.tools.annotate.AnnotateClassesMojo.execute(AnnotateClassesMojo.java:64) > > at > > > org.apache.maven.plugin.DefaultBuildPluginManager.executeMojo(DefaultBuildPluginManager.java:134) > > at > > > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:207) > > at > > > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153) > > at > > > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145) > > > > > > I don't know if it is important. > > > > > > Also, when I got to the final step I have set the > distributionTargetFolder > > variable to a valid location but the build did not put anything in that > > folder (although it otherwise completed normally). I was running this > > build-distribution command from inside flex-asjs. If it is sufficient to > > simply define the location as instructed, and run the same > > build-distribution step again, then that part does not seem to be working > > for me. > > > > This is on Windows 10, in case that is important also. > > > > -Greg > > > > > > > > > > > > On Wed, Jul 27, 2016 at 6:38 PM, Christofer Dutz < > > christofer.d...@c-ware.de> wrote: > > > >> > >> Hi Greg, > >> > >> > >> I'm happy that you like the build so far :-) > >> > >> > >> Justin and I am currently finishing up a 2 hour video tutorial on Maven, > >> which I hope we will be able to publish soon. I guess that should get > rid > >> of this black-box-magic feeling you might be encountering at the moment > ;-) > >> > >> > >> And hanks for the ... I think that usually RAT automatically excludes > IDE > >> settings files for modules that are part of the build. But I guess this > >> could be an issue if the files are located in a directory that's not a > >> Maven module (All these duplicate XyzJS modules needed to make Eclipse > >> happy). The reason why RAT is complaining only about the 4 License > files in > >> the lib dir is that RAT doesn't require binary files to have a header > and > >> those are the only not-binary files without headers. I guess I'll just > >> exclude the lib directory in all modules. > >> > >> > >> I would like to keep the plugin in the build, cause when I added it to > >> the build it reported about 10 files without headers. The check only > takes > >> a fraction of a second on my machine and it does make things safer from > an > >> Apache point of view. I could however add it to the release profile, but > >> then we would start encountering problems as soon as I would build a > >> release candidate, which would be unfortunate. So could you guys please > >> report the full relative paths of stuff RAT is complaining about after > >> using Ant and I would take care of adding exclusions. > >> > >> > >> Chris > >> > >> ________________________________ > >> Von: Greg Dove <greg.d...@gmail.com> > >> Gesendet: Mittwoch, 27. Juli 2016 07:29:28 > >> An: dev@flex.apache.org > >> Betreff: Re: AW: [FLEXJS, TYPEDEFS] > >> > >> Chris, I also encountered similar issues with the frameworks build, and > >> started adding extra <excludes> tags for the rat {insert maven-esque > word > >> for "task"/plugin here} to ignore things like intellij files and > swfobject > >> etc in flex-asjs pom.xml > >> > >> <exclude>**/*.iml</exclude> > >> <exclude>**/.idea/**</exclude> > >> > >> But I found it easier in the end to delete that whole "plugin" from the > >> pom.xml as a quick approach for now and the build completed flawlessly. > >> I like the experience so far, I just haven't gotten my head fully around > >> it > >> yet. > >> I will try this from a clean slate tomorrow -following the instructions > >> exactly - instead of trying to do it within the current setup I have, > >> where > >> I have used ant builds previously or have extra IDE files.. > >> > >> > >> > >> > >> On Wed, Jul 27, 2016 at 11:22 AM, Greg Dove <greg.d...@gmail.com> > wrote: > >> > >> > I just finally got around to trying this as well and encountered the > >> same > >> > issue, and yes, I have used ant previously as well, otherwise it is > >> looking > >> > very good - I especially like the sound of the > distributionTargetFolder > >> > option :) > >> > > >> > The rat report shows the following for me: > >> > > >> > 3 Unknown Licenses > >> > > >> > ***************************************************** > >> > > >> > Files with unapproved licenses: > >> > > >> > D:/FLEXSDKS/dev/flex-falcon/compiler/lib/external/antlr-LICENSE.html > >> > D:/FLEXSDKS/dev/flex-falcon/compiler/lib/external/jflex-COPYRIGHT > >> > > >> D:/FLEXSDKS/dev/flex-falcon/compiler/lib/external/lzma-sdk-LICENSE.html > >> > > >> > ... (I assume the rest is ok) > >> > > >> > On Wed, Jul 27, 2016 at 7:52 AM, Christofer Dutz < > >> > christofer.d...@c-ware.de> wrote: > >> > > >> >> I guess if you had run the Ant build before, there might be some > files > >> >> generated in places I didn't anticipate. So the RAT plugin is > >> complaining > >> >> about these files not having Apache Headers in them ... usually the > >> >> target/rat.txt file will contain a list of the violating files. > >> >> > >> >> > >> >> Chris > >> >> > >> >> ________________________________ > >> >> Von: Peter Ent <p...@adobe.com> > >> >> Gesendet: Dienstag, 26. Juli 2016 17:40:58 > >> >> An: dev@flex.apache.org > >> >> Betreff: Re: AW: [FLEXJS, TYPEDEFS] > >> >> > >> >> Hi, > >> >> > >> >> I just finished installing and running maven. I was able to build > >> >> flex-falcon "utils" but when I went to build the compiler, it failed > on > >> >> the rat report check (below). But I think it would have worked nicely > >> >> otherwise. Great job! > >> >> > >> >> [INFO] Rat check: Summary over all files. Unapproved: 18, unknown: > 18, > >> >> generated: 0, approved: 2005 licenses. > >> >> [INFO] > >> >> > >> ------------------------------------------------------------------------ > >> >> [INFO] Reactor Summary: > >> >> [INFO] > >> >> [INFO] Apache Flex - FlexJS: Compiler: Parent ............. SUCCESS [ > >> >> 2.541 s] > >> >> [INFO] Apache Flex - FlexJS: Compiler: Test Utils ......... SUCCESS [ > >> >> 1.554 s] > >> >> [INFO] Apache Flex - FlexJS: Compiler: Compiler ........... FAILURE [ > >> >> 26.918 s] > >> >> [INFO] Apache Flex - FlexJS: Compiler: Compiler-JX ........ SKIPPED > >> >> [INFO] Apache Flex - FlexJS: Compiler: Debugger ........... SKIPPED > >> >> [INFO] Apache Flex - FlexJS: Compiler: OEM Layer .......... SKIPPED > >> >> [INFO] Apache Flex - FlexJS: FlexJS Ant Tasks ............. SKIPPED > >> >> [INFO] Apache Flex - FlexJS: FlexJS Maven Plugin .......... SKIPPED > >> >> [INFO] > >> >> > >> ------------------------------------------------------------------------ > >> >> [INFO] BUILD FAILURE > >> >> [INFO] > >> >> > >> ------------------------------------------------------------------------ > >> >> [INFO] Total time: 31.259 s > >> >> [INFO] Finished at: 2016-07-26T11:35:14-04:00 > >> >> [INFO] Final Memory: 52M/1114M > >> >> [INFO] > >> >> > >> ------------------------------------------------------------------------ > >> >> [ERROR] Failed to execute goal > >> org.apache.rat:apache-rat-plugin:0.12:check > >> >> (license-check) on project compiler: Too many files with unapproved > >> >> license: 18 See RAT report in: > >> >> /Users/pent/dev/flex-falcon/compiler/target/rat.txt -> [Help 1] > >> >> > >> >> > >> >> > >> >> On 7/26/16, 2:19 AM, "Christofer Dutz" <christofer.d...@c-ware.de> > >> wrote: > >> >> > >> >> >By the way ... did you give the Maven build a try? > >> >> > > >> >> > > >> >> >Chris > >> >> > > >> >> >________________________________ > >> >> >Von: Peter Ent <p...@adobe.com> > >> >> >Gesendet: Montag, 25. Juli 2016 20:05:49 > >> >> >An: Alex Harui; dev@flex.apache.org > >> >> >Betreff: Re: [FLEXJS, TYPEDEFS] > >> >> > > >> >> >Got this to work with help from Alex. I had FALCONJX_HOME pointing > to > >> an > >> >> >old directory: flex-falcon/compiler.jx; it should have been pointing > >> to > >> >> >flex-falcon/compiler-jx > >> >> > > >> >> >—peter > >> >> > > >> >> >From: Alex Harui <aha...@adobe.com<mailto:aha...@adobe.com>> > >> >> >Date: Monday, July 25, 2016 at 11:42 AM > >> >> >To: Peter Ent <p...@adobe.com<mailto:p...@adobe.com>>, > >> >> >"dev@flex.apache.org<mailto:dev@flex.apache.org>" > >> >> ><dev@flex.apache.org<mailto:dev@flex.apache.org>> > >> >> >Subject: Re: [FLEXJS, TYPEDEFS] > >> >> > > >> >> >Try ant all in falcon again. > >> >> > > >> >> >Sent from my LG G3, an AT&T 4G LTE smartphone > >> >> > > >> >> >------ Original message------ > >> >> >From: Peter Ent > >> >> >Date: Mon, Jul 25, 2016 7:56 AM > >> >> >To: dev@flex.apache.org<mailto:dev@flex.apache.org>; > >> >> >Subject:Re: [FLEXJS, TYPEDEFS] > >> >> > > >> >> >Running ant in flex-typedefs/jquery does not give the error and > builds > >> >> >successfully. I do not have FLEX_FALCON environment var set at all. > >> >> >—peter > >> >> > > >> >> >On 7/25/16, 10:51 AM, "Alex Harui" > >> >> ><aha...@adobe.com<mailto:aha...@adobe.com>> wrote: > >> >> > > >> >> >>Go to flex-typedefs/jquery and run 'ant'. Do you get the same > >> errors? > >> >> >>If > >> >> >>so, do you have a FLEX_FALCON environment variable pointing > somewhere > >> >> >>other than flex-falcon? > >> >> >> > >> >> >>-Alex > >> >> >> > >> >> >>On 7/25/16, 7:34 AM, "Peter Ent" <p...@adobe.com<mailto: > >> p...@adobe.com > >> >> >> > >> >> >>wrote: > >> >> >> > >> >> >>>Yes, I had done that as well. So this time I did: > >> >> >>> > >> >> >>>typedefs: ant wipe > >> >> >>>falcon: ant wipe-all; ant all > >> >> >>> > >> >> >>>Get same errors below. > >> >> >>> > >> >> >>>On 7/25/16, 10:27 AM, "Alex Harui" > >> >> >>><aha...@adobe.com<mailto:aha...@adobe.com>> wrote: > >> >> >>> > >> >> >>>>Did you also do a "wipe" in flex-typedefs? IIRC, that was the > repo > >> >> >>>>that > >> >> >>>>was on the wrong branch and could have left cruft. > >> >> >>>> > >> >> >>>>-Alex > >> >> >>>> > >> >> >>>>On 7/25/16, 7:23 AM, "Peter Ent" > >> >> >>>><p...@adobe.com<mailto:p...@adobe.com>> wrote: > >> >> >>>> > >> >> >>>>>So back to this. > >> >> >>>>> > >> >> >>>>>This morning I did a new pull from flex-falcon/typedefs/asjs > just > >> to > >> >> >>>>>be > >> >> >>>>>certain, I think a couple of new things came down. > >> >> >>>>> > >> >> >>>>>I did ant wipe-all in falcon followed by ant all. I get this > >> error at > >> >> >>>>>the > >> >> >>>>>end of the build (below). Is falcon supposed to be built first? > >> I'm > >> >> >>>>>assuming typedefs needs the compiler since I saw it using compc > >> (at > >> >> >>>>>least). And why is the flex-falcon build getting stuff for > >> >> >>>>>flex-typedefs > >> >> >>>>>(see download: part of the console log, below)? This is why I'm > >> >> >>>>>wondering > >> >> >>>>>if flex-typedefs get built first - shouldn't it be getting the > >> stuff > >> >> >>>>>in > >> >> >>>>>its own directories? > >> >> >>>>> > >> >> >>>>>‹peter > >> >> >>>>> > >> >> >>>>>download: > >> >> >>>>> [get] Getting: > >> >> >>>>> > >> >> > https://raw.githubusercontent.com/google/closure-compiler/master/contr > >> >> >>>>>i > >> >> >>>>>b > >> >> >>>>>/ > >> >> >>>>>e > >> >> >>>>>x > >> >> >>>>>terns/jquery-1.9.js > >> >> >>>>> [get] To: > >> >> > >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/downloads/jquery-1.9.js > >> >> >>>>> > >> >> >>>>> > >> >> >>>>>preprocess: > >> >> >>>>> > >> >> >>>>> > >> >> >>>>>externc: > >> >> >>>>> [java] event parameters not found! 0 > >> >> >>>>> [java] fx parameters not found! 0 > >> >> >>>>> [java] 0.950329 seconds > >> >> >>>>> [java] Java Result: 255 > >> >> >>>>> > >> >> >>>>> > >> >> >>>>>postprocess: > >> >> >>>>> > >> >> >>>>> > >> >> >>>>>compc: > >> >> >>>>> [java] Loading configuration: > >> >> > >>>>>/Users/pent/dev/flex-typedefs/jquery/target/compile-as-config.xml > >> >> >>>>> [java] > >> >> >>>>> [java] > >> >> > >> >> > >> > >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ > >> >> >>>>>c > >> >> >>>>>o > >> >> >>>>>n > >> >> >>>>>s > >> >> >>>>>t > >> >> >>>>>ants/$.as:3 > >> >> >>>>> [java] Warning: Incompatible initializer value of type > 'int' > >> >> >>>>>where > >> >> >>>>>'jQuery' is expected. An initial value of null will be used > >> instead. > >> >> >>>>> [java] public const $:jQuery = undefined; > >> >> >>>>> [java] ^ > >> >> >>>>> [java] > >> >> >>>>> [java] > >> >> > >> >> > >> > >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ > >> >> >>>>>i > >> >> >>>>>n > >> >> >>>>>t > >> >> >>>>>e > >> >> >>>>>r > >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:20 > >> >> >>>>> [java] Error: A conflict exists with definition processData > >> in > >> >> >>>>>namespace public. > >> >> >>>>> [java] function get processData():Boolean; > >> >> >>>>> [java] ^ > >> >> >>>>> [java] > >> >> >>>>> [java] > >> >> > >> >> > >> > >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ > >> >> >>>>>i > >> >> >>>>>n > >> >> >>>>>t > >> >> >>>>>e > >> >> >>>>>r > >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:20 > >> >> >>>>> [java] Error: Cannot override an interface method. Method > >> >> >>>>>processData conflicts with a method in base interface > >> >> >>>>>jQueryAjaxSettings. > >> >> >>>>> [java] function get processData():Boolean; > >> >> >>>>> [java] ^ > >> >> >>>>> [java] > >> >> >>>>> [java] > >> >> > >> >> > >> > >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ > >> >> >>>>>i > >> >> >>>>>n > >> >> >>>>>t > >> >> >>>>>e > >> >> >>>>>r > >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:20 > >> >> >>>>> [java] Error: Cannot override an interface method. Method > >> >> >>>>>processData conflicts with a method in base interface > >> >> >>>>>jQueryAjaxSettings. > >> >> >>>>> [java] function get processData():Boolean; > >> >> >>>>> [java] ^ > >> >> >>>>> [java] > >> >> >>>>> [java] > >> >> > >> >> > >> > >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ > >> >> >>>>>i > >> >> >>>>>n > >> >> >>>>>t > >> >> >>>>>e > >> >> >>>>>r > >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:21 > >> >> >>>>> [java] Error: A conflict exists with definition processData > >> in > >> >> >>>>>namespace public. > >> >> >>>>> [java] function set processData(value:Boolean):void; > >> >> >>>>> [java] ^ > >> >> >>>>> [java] > >> >> >>>>> [java] > >> >> > >> >> > >> > >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ > >> >> >>>>>i > >> >> >>>>>n > >> >> >>>>>t > >> >> >>>>>e > >> >> >>>>>r > >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:21 > >> >> >>>>> [java] Error: Cannot override an interface method. Method > >> >> >>>>>processData conflicts with a method in base interface > >> >> >>>>>jQueryAjaxSettings. > >> >> >>>>> [java] function set processData(value:Boolean):void; > >> >> >>>>> [java] ^ > >> >> >>>>> [java] > >> >> >>>>> [java] > >> >> > >> >> > >> > >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ > >> >> >>>>>i > >> >> >>>>>n > >> >> >>>>>t > >> >> >>>>>e > >> >> >>>>>r > >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:21 > >> >> >>>>> [java] Error: Cannot override an interface method. Method > >> >> >>>>>processData conflicts with a method in base interface > >> >> >>>>>jQueryAjaxSettings. > >> >> >>>>> [java] function set processData(value:Boolean):void; > >> >> >>>>> [java] ^ > >> >> >>>>> [java] > >> >> >>>>> > >> >> >>>>> > >> >> >>>>>BUILD FAILED > >> >> >>>>>/Users/pent/dev/flex-falcon/build.xml:140: The following error > >> >> >>>>>occurred > >> >> >>>>>while executing this line: > >> >> >>>>>/Users/pent/dev/flex-typedefs/build.xml:57: The following error > >> >> >>>>>occurred > >> >> >>>>>while executing this line: > >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/build.xml:140: Java > >> returned: 2 > >> >> >>>>> > >> >> >>>>> > >> >> >>>>> > >> >> >>>>>On 7/22/16, 11:20 PM, "Alex Harui" > >> >> >>>>><aha...@adobe.com<mailto:aha...@adobe.com>> wrote: > >> >> >>>>> > >> >> >>>>>>I just did ant wipe-all and ant all in Falcon and it worked for > >> me. > >> >> >>>>>> > >> >> >>>>>>Did you run 'ant wipe' in flex-typedefs after switching to the > >> >> >>>>>>develop > >> >> >>>>>>branch? Since that was the repo that was on the wrong branch > it > >> >> >>>>>>might > >> >> >>>>>>have some cruft in it that is messing up the flex-falcon build. > >> >> >>>>>> > >> >> >>>>>>-Alex > >> >> >>>>>> > >> >> >>>>>>On 7/22/16, 1:33 PM, "Peter Ent" > >> >> >>>>>><p...@adobe.com<mailto:p...@adobe.com>> wrote: > >> >> >>>>>> > >> >> >>>>>>>No joy. I did switch to develop branch of flex-typedefs. > >> >> >>>>>>> > >> >> >>>>>>>I sync'd with Falcon and did an ant all; that failed so I did > a > >> ant > >> >> >>>>>>>wipe-all and then ant all. That fails: > >> >> >>>>>>> > >> >> >>>>>>>download: > >> >> >>>>>>> [get] Getting: > >> >> >>>>>>> > >> >> https://raw.githubusercontent.com/google/closure-compiler/master/con > >> >> >>>>>>>t > >> >> >>>>>>>r > >> >> >>>>>>>i > >> >> >>>>>>>b > >> >> >>>>>>>/ > >> >> >>>>>>>e > >> >> >>>>>>>x > >> >> >>>>>>>terns/jquery-1.9.js > >> >> >>>>>>> [get] To: > >> >> > >> > >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/downloads/jquery-1.9.js > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>>preprocess: > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>>externc: > >> >> >>>>>>> [java] event parameters not found! 0 > >> >> >>>>>>> [java] fx parameters not found! 0 > >> >> >>>>>>> [java] 0.902557 seconds > >> >> >>>>>>> [java] Java Result: 255 > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>>postprocess: > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>>compc: > >> >> >>>>>>> [java] Loading configuration: > >> >> > >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/compile-as-config.xml > >> >> >>>>>>> [java] > >> >> >>>>>>> [java] > >> >> > >> >> > >> > >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern > >> >> >>>>>>>c > >> >> >>>>>>>/ > >> >> >>>>>>>c > >> >> >>>>>>>o > >> >> >>>>>>>n > >> >> >>>>>>>s > >> >> >>>>>>>t > >> >> >>>>>>>ants/$.as:3 > >> >> >>>>>>> [java] Warning: Incompatible initializer value of type > >> 'int' > >> >> >>>>>>>where > >> >> >>>>>>>'jQuery' is expected. An initial value of null will be used > >> >> instead. > >> >> >>>>>>> [java] public const $:jQuery = undefined; > >> >> >>>>>>> [java] ^ > >> >> >>>>>>> [java] > >> >> >>>>>>> [java] > >> >> > >> >> > >> > >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern > >> >> >>>>>>>c > >> >> >>>>>>>/ > >> >> >>>>>>>i > >> >> >>>>>>>n > >> >> >>>>>>>t > >> >> >>>>>>>e > >> >> >>>>>>>r > >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:20 > >> >> >>>>>>> [java] Error: A conflict exists with definition > >> processData in > >> >> >>>>>>>namespace public. > >> >> >>>>>>> [java] function get processData():Boolean; > >> >> >>>>>>> [java] ^ > >> >> >>>>>>> [java] > >> >> >>>>>>> [java] > >> >> > >> >> > >> > >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern > >> >> >>>>>>>c > >> >> >>>>>>>/ > >> >> >>>>>>>i > >> >> >>>>>>>n > >> >> >>>>>>>t > >> >> >>>>>>>e > >> >> >>>>>>>r > >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:20 > >> >> >>>>>>> [java] Error: Cannot override an interface method. > Method > >> >> >>>>>>>processData conflicts with a method in base interface > >> >> >>>>>>>jQueryAjaxSettings. > >> >> >>>>>>> [java] function get processData():Boolean; > >> >> >>>>>>> [java] ^ > >> >> >>>>>>> [java] > >> >> >>>>>>> [java] > >> >> > >> >> > >> > >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern > >> >> >>>>>>>c > >> >> >>>>>>>/ > >> >> >>>>>>>i > >> >> >>>>>>>n > >> >> >>>>>>>t > >> >> >>>>>>>e > >> >> >>>>>>>r > >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:20 > >> >> >>>>>>> [java] Error: Cannot override an interface method. > Method > >> >> >>>>>>>processData conflicts with a method in base interface > >> >> >>>>>>>jQueryAjaxSettings. > >> >> >>>>>>> [java] function get processData():Boolean; > >> >> >>>>>>> [java] ^ > >> >> >>>>>>> [java] > >> >> >>>>>>> [java] > >> >> > >> >> > >> > >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern > >> >> >>>>>>>c > >> >> >>>>>>>/ > >> >> >>>>>>>i > >> >> >>>>>>>n > >> >> >>>>>>>t > >> >> >>>>>>>e > >> >> >>>>>>>r > >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:21 > >> >> >>>>>>> [java] Error: A conflict exists with definition > >> processData in > >> >> >>>>>>>namespace public. > >> >> >>>>>>> [java] function set processData(value:Boolean):void; > >> >> >>>>>>> [java] ^ > >> >> >>>>>>> [java] > >> >> >>>>>>> [java] > >> >> > >> >> > >> > >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern > >> >> >>>>>>>c > >> >> >>>>>>>/ > >> >> >>>>>>>i > >> >> >>>>>>>n > >> >> >>>>>>>t > >> >> >>>>>>>e > >> >> >>>>>>>r > >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:21 > >> >> >>>>>>> [java] Error: Cannot override an interface method. > Method > >> >> >>>>>>>processData conflicts with a method in base interface > >> >> >>>>>>>jQueryAjaxSettings. > >> >> >>>>>>> [java] function set processData(value:Boolean):void; > >> >> >>>>>>> [java] ^ > >> >> >>>>>>> [java] > >> >> >>>>>>> [java] > >> >> > >> >> > >> > >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern > >> >> >>>>>>>c > >> >> >>>>>>>/ > >> >> >>>>>>>i > >> >> >>>>>>>n > >> >> >>>>>>>t > >> >> >>>>>>>e > >> >> >>>>>>>r > >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:21 > >> >> >>>>>>> [java] Error: Cannot override an interface method. > Method > >> >> >>>>>>>processData conflicts with a method in base interface > >> >> >>>>>>>jQueryAjaxSettings. > >> >> >>>>>>> [java] function set processData(value:Boolean):void; > >> >> >>>>>>> [java] ^ > >> >> >>>>>>> [java] > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>>BUILD FAILED > >> >> >>>>>>>/Users/pent/dev/flex-falcon/build.xml:140: The following error > >> >> >>>>>>>occurred > >> >> >>>>>>>while executing this line: > >> >> >>>>>>>/Users/pent/dev/flex-typedefs/build.xml:57: The following > error > >> >> >>>>>>>occurred > >> >> >>>>>>>while executing this line: > >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/build.xml:140: Java > >> returned: > >> >> 2 > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>>Total time: 1 minute 47 seconds > >> >> >>>>>>>pent-osx:flex-falcon pent$ > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>> > >> >> >>>>>>>On 7/22/16, 3:44 PM, "Alex Harui" > >> >> >>>>>>><aha...@adobe.com<mailto:aha...@adobe.com>> wrote: > >> >> >>>>>>> > >> >> >>>>>>>>Did you switch to the develop branch in flex-typedefs? If > you > >> >> used > >> >> >>>>>>>>the > >> >> >>>>>>>>standard folder naming and structure, the scripts should find > >> it. > >> >> >>>>>>>>You > >> >> >>>>>>>>may > >> >> >>>>>>>>need to sync and build flex-falcon first. > >> >> >>>>>>>> > >> >> >>>>>>>>-Alex > >> >> >>>>>>>> > >> >> >>>>>>>>On 7/22/16, 12:13 PM, "Peter Ent" > >> >> >>>>>>>><p...@adobe.com<mailto:p...@adobe.com>> wrote: > >> >> >>>>>>>> > >> >> >>>>>>>>>Just sync'd flex-asjs repo. Must have missed the email about > >> it > >> >> >>>>>>>>>now > >> >> >>>>>>>>>requiring flex-typedefs. Cloned that and tried to build it > >> using > >> >> >>>>>>>>>ant: > >> >> >>>>>>>>> > >> >> >>>>>>>>> > >> >> >>>>>>>>>/Users/pent/dev/flex-typedefs/build.xml:52: The following > >> error > >> >> >>>>>>>>>occurred > >> >> >>>>>>>>>while executing this line: > >> >> >>>>>>>>> > >> >> >>>>>>>>>/Users/pent/dev/flex-typedefs/js/build.xml:29: src > >> >> > >> >> > >> > >>>>>>>>>'/Users/pent/dev/compiler-jx/lib/google/closure-compiler/compiler. > >> >> >>>>>>>>>j > >> >> >>>>>>>>>a > >> >> >>>>>>>>>r > >> >> >>>>>>>>>' > >> >> >>>>>>>>>doesn't exist. > >> >> >>>>>>>>> > >> >> >>>>>>>>> > >> >> >>>>>>>>>I don't see any README or instructions in the flex-typedefs > >> repo. > >> >> >>>>>>>>>What > >> >> >>>>>>>>>ENV vars are required to build it? I did a quick search > >> through > >> >> >>>>>>>>>past > >> >> >>>>>>>>>emails and while I found a number of git-related items and > >> some > >> >> >>>>>>>>>discussion about it, I didn't see anything that provided > some > >> >> >>>>>>>>>insight. > >> >> >>>>>>>>> > >> >> >>>>>>>>> > >> >> >>>>>>>>>Thanks, > >> >> >>>>>>>>> > >> >> >>>>>>>>>Peter > >> >> >>>>>>>> > >> >> >>>>>>> > >> >> >>>>>> > >> >> >>>>> > >> >> >>>> > >> >> >>> > >> >> >> > >> >> > > >> >> > >> >> > >> > > >> > > > > >
